#pragma once //指令ID，用于eBus指令 /////////////////////////////////////////////////////////////////// //1. DIOS const DWORD BUSCMD_DIOS = 15000; //DIOS起始 //1.1 DIOS_HW const DWORD BUSCMD_HW = BUSCMD_DIOS; //原HW指令 //1.1.1 DIOS_HW_SEQ const DWORD BUSCMD_HW_SEQ = BUSCMD_HW; // //1.1.2 DIOS_HW_ERROR const DWORD BUSCMD_HW_ERROR = BUSCMD_HW + 100; // const DWORD BUSCMD_KERNEL = BUSCMD_HW + 180; // //1.1.3 DIOS_HW_PARAM const DWORD BUSCMD_HW_PARAM = BUSCMD_HW + 200; // //1.1.4 DIOS_HW_WARN const DWORD BUSCMD_HW_WARN = BUSCMD_HW_ERROR; // const DWORD BUSCMD_JSON_DATA = BUSCMD_HW +301; //FPD APP //1.1.5 DIOS_HW_DATA const DWORD BUSCMD_HW_DATA = BUSCMD_HW + 500; // //1.2 DIOS_SIS const DWORD BUSCMD_SIS = BUSCMD_DIOS + 2000; //新增信息指令 const DWORD BUSCMD_SIS_LOG = BUSCMD_SIS + 905; //日志 const DWORD BUSCMD_SIS_DEVICE_STATUS = BUSCMD_SIS + 910; //硬件信息 //硬件层 /////////////////////////////////////////////////////////////////// static const wchar_t *CMDID_ACD = L"ACD"; //ACtiveDevices通知UI当前激活设备组 static const wchar_t *CMDID_ACK = L"ACK"; //验证进程是否有响应，并且进程中包含哪些设备？目前只在初始化之前发送 static const wchar_t *CMDID_ACT = L"ACT"; //切换设备，比如切换探测器 static const wchar_t *CMDID_APR = L"APR"; //发生器APR参数，From UI to GEN static const wchar_t *CMDID_ANG = L"ANG"; //角度状态 static const wchar_t *CMDID_AST = L"AST"; //切换设备的结果，03成功，04失败 static const wchar_t *CMDID_CAL = L"CAL"; //校正相关消息：01 开始校正，02 确认校正结果，03拒绝图像结果，04 终止校正，05 完成校正 static const wchar_t *CMDID_CAP = L"CAP"; //设备能力 static const wchar_t *CMDID_CAM = L"CAM"; //校正模式 static const wchar_t *CMDID_CLR = L"CLR"; //发生器ClearDAP static const wchar_t *CMDID_DEM = L"DEM"; //探测器模块是simulator或者real ，0是real ,1是simulator static const wchar_t *CMDID_DFG = L"DFG"; //发生器DeviceFunction static const wchar_t *CMDID_ERR = L"ERR"; //错误消息 static const wchar_t *CMDID_ERX = L"ERX"; //错误恢复消息 static const wchar_t *CMDID_ETS = L"ETS"; //发生器TechMode 如Times AEC MAS模式 static const wchar_t *CMDID_EXM = L"EXM"; //进入\退出检查 01是进入检查，02是退出检查 static const wchar_t *CMDID_EXP = L"EXP"; //发生器SetEXP static const wchar_t *CMDID_EXT = L"EXT"; //进程退出 static const wchar_t *CMDID_EXV = L"EXV"; //发生器GetDAP static const wchar_t *CMDID_FIS = L"FIS"; //发生器AEC Field static const wchar_t *CMDID_FRM = L"FRM"; //帧曝光，01 帧曝光开始，03帧曝光准备以及READY，04帧曝光失败 static const wchar_t *CMDID_FRQ = L"FRQ"; //帧频，主要给RF用 static const wchar_t *CMDID_FND = L"FND"; //发生器DEC AECDensity static const wchar_t *CMDID_FNI = L"FNI"; //发生器INC AECDensity static const wchar_t *CMDID_FNS = L"FNS"; //发生器Density设置 static const wchar_t *CMDID_FOS = L"FOS"; //FocusSet发生器大小焦点 static const wchar_t *CMDID_FRC = L"FRC"; //发生器RefreshConData static const wchar_t *CMDID_FRS = L"FRS"; //发生器RefreshSysData static const wchar_t *CMDID_FSS = L"FSS"; //发生器AEC Film static const wchar_t *CMDID_GCM = L"GCM"; //发生器SetControlMode static const wchar_t *CMDID_HEG = L"HEG"; //发生器GetHE static const wchar_t *CMDID_HET = L"HET"; //高度状态 static const wchar_t *CMDID_HSW = L"HSW"; //手闸信号， 02是二级手闸按下，03是二级手闸松开 static const wchar_t *CMDID_IDX = L"IDX"; //InDeX 进程内设备的ID，From HW static const wchar_t *CMDID_IMA = L"IMA"; //IMageArrive 图像到达 static const wchar_t *CMDID_INI = L"INI"; //初始化设备，01 成功，00 失败 static const wchar_t *CMDID_KVD = L"KVD"; //发生器DEC KV static const wchar_t *CMDID_KVI = L"KVI"; //发生器INC KV static const wchar_t *CMDID_KVS = L"KVS"; //设置发生器KV值 static const wchar_t *CMDID_LAN = L"LAN"; //设置语言 static const wchar_t *CMDID_MAD = L"MAD"; //发生器DEC MA static const wchar_t *CMDID_MAI = L"MAI"; //发生器INC MA static const wchar_t *CMDID_MAS = L"MAS"; //设置发生器MA值 static const wchar_t *CMDID_MSD = L"MSD"; //发生器DEC MS static const wchar_t *CMDID_MSI = L"MSI"; //发生器INC MS static const wchar_t *CMDID_MSS = L"MSS"; //设置发生器MS值 static const wchar_t *CMDID_MXD = L"MXD"; //发生器DEC MAS static const wchar_t *CMDID_MXI = L"MXI"; //发生器INC MAS static const wchar_t *CMDID_MXS = L"MXS"; //设置发生器MAX值 static const wchar_t *CMDID_MOD = L"MOD"; //MODe 曝光模式，主要是设置探测器 static const wchar_t *CMDID_MVS = L"MVS"; //移动状态：0：停止； 1：移动 static const wchar_t *CMDID_RES = L"RES"; //发生器SetRE static const wchar_t *CMDID_SAI = L"SAI"; //接受拼接图像 static const wchar_t *CMDID_SCC = L"SCC"; //取消拼接 static const wchar_t *CMDID_SCP = L"SCP"; //完成拼接 static const wchar_t *CMDID_SEE = L"SEE"; //SetExpEnable曝光使能信号，00禁用曝光，01曝光使能 static const wchar_t *CMDID_SEQ = L"SEQ"; //序列曝光消息，01序列曝光开始，02序列曝光结束，03序列曝光准备及READY static const wchar_t *CMDID_SEV = L"SEV"; //拼接增加图像 static const wchar_t *CMDID_SIC = L"SIC"; //拼接图像当前序号 static const wchar_t *CMDID_SID = L"SID"; //源像距SID值，单位mm static const wchar_t *CMDID_SIM = L"SIM"; //当前VIEW的唯一标识，设置到图像头中，用于图像与VIEW信息唯一匹配 static const wchar_t *CMDID_SIN = L"SIN"; //拼接图像总数 static const wchar_t *CMDID_SPC = L"SPC"; //自动定位指令 static const wchar_t *CMDID_SRI = L"SRI"; //拒绝拼接图像 static const wchar_t *CMDID_SST = L"SST"; //设置拼接 static const wchar_t *CMDID_STE = L"STE"; //探测器状态，Prepare READY等 static const wchar_t *CMDID_STG = L"STG"; //发生器GetST static const wchar_t *CMDID_STS = L"STS"; //拼接状态字符串 static const wchar_t *CMDID_TLS = L"TLS"; //发生器SetTimeLimits static const wchar_t *CMDID_WAR = L"WAR"; //警告 static const wchar_t *CMDID_WSS = L"WSS"; //发生器\同步盒的workstation设置 static const wchar_t *CMDID_TAG = L"TAG"; //发生器\同步盒的workstation设置 static const wchar_t *CMDID_ORG = L"ORG"; //西门子 选择View static const wchar_t *CMDID_EXL = L"EXL"; //西门子 View列表 static const wchar_t *CMDID_INF = L"INF"; //西门子 View列表 static const wchar_t *CMDID_DOS = L"DOS"; //设置AECDOSE的值 static const wchar_t *CMDID_DOI = L"DOI"; //发生器INC Dose static const wchar_t *CMDID_DOD = L"DOD"; //发生器DEC Dose static const wchar_t *CMDID_SHO = L"SHO"; //确认是否设置OGP成功，即我期望得到你们回复报文SH_ORGAN_PROG; 1：成功；0：失败；