//--------------------------------------------------------------------------------------- // // Copyright (c) 2005,珠海友通科技有限公司——通用型DROC // All rights reserved. // // 文件名称：CommonMessage.h // 文件标识：见配置管理计划书 // 摘 要：系统之间需要传递的的消息主要有界面消息，硬件消息，数据流消息，以方便模块之间传递消息 // // 当前版本：0.1 // 作 者：吕国政 // 完成日期：2005年1月10日 // // 取代版本： // 原 作 者： // 完成日期： // //--------------------------------------------------------------------------------------- #pragma once //界面发送的消息： #define WM_ECOM_UI WM_USER + 1000 //USER INTERFACE //Workflow调用UIInterface的InitView函数，UIInterface显示InitForm,然后向Workflow发送此消息， //Workflow开始进行硬件及服务器的连接和初始化。 #define MSG_UI_INIT WM_ECOM_UI + 0 //显示登陆界面后，向workflow发送此消息，加载所有的用户信息。 #define MSG_UI_LOGON_USERALL WM_ECOM_UI + 1 //在登陆界面选定用户，进入工作状态后，向workflow发送此消息。 #define MSG_UI_LOGON_USERLOGON WM_ECOM_UI + 2 //登出界面选择关闭计算机项，向workflow发送此消息。 #define MSG_UI_LOGOFF WM_ECOM_UI + 3 //WPARAM: #define ECOM_SHOTDOWN 1 //关闭计算机项 #define ECOM_CHANAGEUSER 2 //更改用户 #define ECOM_EXITAPP 3 //退出DROC程序 #define ECOM_RESTARTUP 4 //计算机重起 //用户管理界面,添加/删除/修改 #define MSG_UI_MANAGEUSER WM_ECOM_UI + 4 //WPARAM: //#define ECOM_ADD 1 //添加 //#define ECOM_DELETE 2 //删除 //#define ECOM_MODIFY 3 //修改 // //#define ECOM_LOAD 1 //加载 //#define ECOM_REFRESH 2 //刷新 //#define ECOM_RESUBMIT 3 //重新提交 //#define ECOM_DELETE 4 //删除 //#define ECOM_SUSPEND 5 //挂起 //#define ECOM_ADD 6 //添加 //#define ECOM_MODIFY 7 //修改 //本地注册界面，增加 #define MSG_UI_LOCALREG_ADD WM_ECOM_UI + 5 //本地注册界面，修改 #define MSG_UI_LOCALREG_MODIFY WM_ECOM_UI + 6 //设定检索标准，向workflow发送此消息，检索 #define MSG_UI_WORKLIST_QUREY WM_ECOM_UI + 7 //WPARAM: #define ECOM_PATIENT_LEVEL 1 //for MANAGEUSER #define ECOM_VISIT_LEVEL 2 #define ECOM_STUDY_LEVEL 3 #define ECOM_WORK_LEVEL 4 #define ECOM_IMAGE_LEVEL 5 #define ECOM_AUTO_LEVEL 6 //刷新任务清单时，向workflow发送此消息。 #define MSG_UI_WORKLIST_REFRESH WM_ECOM_UI + 8 //一个病人的检查 #define MSG_UI_EXAM WM_ECOM_UI + 9 //一个STUDY的检查 #define MSG_UI_WORK WM_ECOM_UI + 10 //一个VIEW/体位的检查 #define MSG_UI_VIEW WM_ECOM_UI + 11 //LPARAM: #define ECOM_ACCEPTED 1 #define ECOM_REFUSED 2 #define ECOM_NEW 3 #define ECOM_UPDATE 4 //WPARAM: #define ECOM_BEGIN 1 #define ECOM_SUSPEND 2 //#define ECOM_END 3 #define ECOM_DATA_MODIFIED 4 #define ECOM_INFO_MODIFIED 5 //加载View的图像或者信息 #define MSG_UI_VIEW_LOAD WM_ECOM_UI + 12 //WPARAM: #define ECOM_IMAGE_ICON_LEVEL 1 //加载对应的投照示意图或拍片后的缩略图时 #define ECOM_IMAGE_INFO_LEVEL 2 //加载对应的曝光，投照信息 #define ECOM_IMAGE_DATA_LEVEL 3 //加载对应的图像数据，处理参数，LUT数据 //加载读取平板图像或者假图，不进行真实的曝光 #define MSG_UI_VIEW_DEMO WM_ECOM_UI + 28 //改变当前view投照的技术参数，发送此消息 #define MSG_UI_VIEW_TECH WM_ECOM_UI + 13 #define MSG_UI_RECOVER_LASTIMAGE WM_ECOM_UI + 50 //WPARAM: //#define GEN_PARAM_KV 0 //kv //#define GEN_PARAM_MA 1 //ma //#define GEN_PARAM_MS 2 //ms //#define GEN_PARAM_MAS 3 //mas //#define GEN_PARAM_RE 8 //reset //LPARAM: MSG_GEN_ERR, MSG_PANEL_ERROR, MSG_SYN_ERROR //#define GEN_PARAM_WS 9 //workstation //#define GEN_PARAM_FO 11 //Focus //#define GEN_PARAM_ET 12 //exposure mode: MA/Time mode, Ma/Ms mode,AEC mode// //#define GEN_PARAM_FI 16 //AEC Field //#define GEN_PARAM_FN 18 //AEC Density #define PNL_PARAM_PW 51 //WPARAM: #define ECOM_WAKEUP 1 #define ECOM_STANDBY 0 #define PNL_PARAM_XWINDOW 52 //#define KV 1 //#define MA 2 //#define MS 3 //#define MAS 4 //#define MODE 5 //#define RESET 6 //LPARAM: 1 MSG_GEN_ERR: GEN, 2 MSG_PANEL_ERROR: PANEL, 3 MSG_SYN_ERROR: SYN //#define FOCUS 7 //#define AECFIELD 8 //#define AECDENSITY 9 #define ECOM_SID 38 //改变SID时 #define ECOM_COLLIMATOR 39 //设置电动COLLIMATOR时 #define ECOM_SIZE 40 //改变病人体型后 #define ECOM_POSTDOSE 41 //AEC模式，曝光后要得到实际曝光的剂量时 // BUCKY 旋转. #define ECOM_BUCKY_ROTATE 61 //LPARAM: #define ECOM_INC 1 //kv, ma, ms, mas 增加 #define ECOM_DEC 2 ////kv, ma, ms, mas 减小 #define ECOM_INC_L 3 //kv, ma, ms, mas 增加大步长5 #define ECOM_DEC_L 4 ////kv, ma, ms, mas 减小大步长5 #define ECOM_SIZE_SMALL 1 #define ECOM_SIZE_MIDDLE 2 #define ECOM_SIZE_LARGE 3 #define ECOM_SIZE_PAEDIATRIC 4 //曝光结束生成DICOM图像，或检查结束，或者察看本地数据，需要发送图像时，发送此图像。 #define MSG_UI_VIEW_DCMSEND WM_ECOM_UI + 14 //曝光结束生成DICOM图像，或检查结束，或者察看本地数据，需要打印图像时，发送此图像。 #define MSG_UI_VIEW_DCMPRINT WM_ECOM_UI + 15 //进入队列管理界面,管理发送队列 #define MSG_UI_QUEUESEND WM_ECOM_UI + 16 //进入队列管理界面,管理打印队列 #define MSG_UI_QUEUEPRINT WM_ECOM_UI + 17 //WPARAM: #define ECOM_LOAD 1 //加载 #define ECOM_REFRESH 2 //刷新 #define ECOM_RESUBMIT 3 //重新提交 #define ECOM_DELETE 4 //删除 #define ECOM_PAUSE 5 //挂起 #define ECOM_ADD 6 //添加 #define ECOM_MODIFY 7 //修改 //本地图像管理，查询 #define MSG_UI_IMAGEMANAGE_QUREY WM_ECOM_UI + 18 //WPARAM: //#define PATIENT 1 //for MANAGEUSER //#define VISIT 2 //#define STUDY 3 //#define WORK 3 //#define IMAGE 3 #define MSG_UI_IMAGEMANAGE_WORK WM_ECOM_UI + 19 //#define ECOM_LOAD 1 //加载 //#define ECOM_DELETE 4 //删除 //#define ECOM_MODIFY 7 //修改 #define ECOM_LOCK 8 //保护 #define ECOM_UNLOCK 9 //解保护 #define ECOM_EXPORT 10 //export #define MSG_UI_RECYCLEMANAGE_QUREY WM_ECOM_UI + 20 #define MSG_UI_RECYCLEMANAGE_WORK WM_ECOM_UI + 21 //#define ECOM_LOAD 1 //加载 //#define ECOM_DELETE 4 //删除 //#define ECOM_MODIFY 7 //修改 //回放当前选择的图像 #define MSG_UI_IMAGEMENAGE_DCMVIEWER WM_ECOM_UI + 22 //重新preview当前选择的图像 #define MSG_UI_IMAGEMENAGE_REPREVIEW WM_ECOM_UI + 23 //校正界面 #define MSG_UI_CALIBRATION WM_ECOM_UI + 24 //WPARAM: //#define ECOM_LOAD 1 #define ECOM_EXIT 2 //选择某校正参数集校正 #define MSG_UI_CALIBRATION_MODE WM_ECOM_UI + 25 // 图像处理参数调整 #define MSG_UI_IMAGE_PARAM_ADJUST WM_ECOM_UI + 32 //WPARAM: #define ECOM_BEGIN 1 #define ECOM_PERFORM 2 #define ECOM_END 3 #define ECOM_ACCEPT 4 #define ECOM_REJECTACCEPTED 6 //UI的处理逻辑：先使能continue按钮；再弹出对话框提示，再调用getcalibrationstep #define ECOM_DELETEACCEPTED 7 #define ECOM_ACCEPTDELETEED 8 #define ECOM_TUBE_WARMUP 9 //#define ECOM_FCALEXP 10 //用于原厂校正不出图的情况，表示曝光开始 使用PNL_READING代替 //传统模式时 #define MSG_UI_CONVENTIONAL WM_ECOM_UI + 26 //WPARAM: //#define ECOM_BEGIN 1 //#define ECOM_END 3 //进入找坏点的界面 #define MSG_BADPIXEL WM_ECOM_UI + 27 #define MSG_UI_STATISTIC WM_ECOM_UI + 29 //WPARAM: #define ECOM_WORKINFO 1 #define ECOM_REJECTIMGINFO 2 #define MSG_UI_AUTOREG_SETTING WM_ECOM_UI + 30 //影像质量控制 #define MSG_UI_IMAGE_QC WM_ECOM_UI + 31 #define MSG_UI_DROC_CONF WM_ECOM_UI + 33 #define MSG_UI_IMAGE_EXPORT WM_ECOM_UI + 34 #define MSG_UI_RELOAD_CONF WM_ECOM_UI + 35 //WPAEAM: #define ECOM_LOAD 1 #define ECOM_SAVE 2 //硬件发送的消息 #define WM_ECOM_HW WM_USER + 1100 //HARD WARE //曝光序列的状态，综合MSG_PANEL_STATUS和MSG_GEN_EXPOSURE #define MSG_HW_SEQUENCE WM_ECOM_HW + 0 //WPARAM: #define HWCOMMSTATUS 0 #define HWREADY 1 //平板准备好，可以开始曝光，这个消息和MSG_PANEL_STATUS重复 #define SEQUENCEBEGIN 2 //手闸按下 #define GENREADY 3 //球馆准备好，可以曝光，平板开始准备开始曝光周期 #define XRAYWINDOWON 4 //平板曝光窗口打开 #define XRAYON 5 //出现X射线 //该消息变成了软同步启动流程，通常来自于发生器端 #define XRAYOFF 6 //X射线停止 #define XRAYWINDOWOFF 7 //平板曝光窗口关闭 #define READIMG 8 //读取图像 #define SEQUENCEEND 9 //序列完成/失败，等待硬件准备 #define HWPREPARE 10 //平板继续准备，这个消息和MSG_PANEL_STATUS重复 #define XRAYOFF_DIRECT 11 //传统模式曝光结束 //code begin 20130911 #define PREHANDSWITCHPRESS 12 //一级手闸按下，但并没有收到发生器串口发出的球管ready确认的状态 目前仅在dragon使用 #define PREHANDSWITCHRELEASE 13 //一级手闸松开 目前仅在dragon使用 //code end 20130911 #define SHUTDOWN 14 //退出DROC系统，关闭计算机 //code 20140328 #define HANDSWITCHPRESS 15 //Sedecal专用：一级手闸按下，收到PR1 #define HANDSWITCHRELEASE 16 //Sedecal专用：一级手闸松开，收到PR0 #define CANCLESHUTDOWN 17 //停止关机操作 code 20170502 #define PERSHUTDOWN 18 //预关机操作 code 20170502 #define XRAYONFROMGEN 19 //出线（备注：专门用于射线，不能参与任何流程） #define XRAYOFFFROMGEN 20 //射线停止（备注：专门用于射线，不能参与任何流程） //显示硬件错误 #define MSG_HW_NOTIFY WM_ECOM_HW + 1 //WPARAM: #define ECOM_WARNING 0 //警告，自动处理 #define ECOM_ERROR 1 //错误，需要处理 #define ECOM_ERRORWARNING 2 //错误，需要处理 //code begin 20091117 #define ECOM_STITCHING_INFO 3 //错误，需要处理 //code end 20091117 //#define ECOM_INFO 4 //正常提示 #define ECOM_DEVICE_AUTO_INFOR 5 #define ECOM_DEVICE_INFOR 6 //code begin 20140423 #define ECOM_RECOVER_P_ERROR 7 //可恢复 需要处理的error //code end 20140423 #define ECOM_DEVICE_INFOR_DISEXP 8 //曝光条件不满足，禁止曝光 #define ECOM_CONNECT_RESULT 9 #define ECOM_DEVICE_RESET 30 //reset 错误消息 #define ECOM_DEVICE_INFOR_ENEXP 31 //曝光条件满足 20151013 #define ECOM_CURRENT_EXPOSURE_FAIL 32 //曝光失败 #define ECOM_ERROR_OTHERS 255 //其他错误，界面弹出对话框 // add by song // date:2014-04-21 // 目的: WPARAM切换workstation时让界面弹出进度条 #define ECOM_DEVICE_SELECT_WS_BEGIN 131 //切换WS开始 #define ECOM_DEVICE_SELECT_WS_ING 132 //切换WS过程中 #define ECOM_DEVICE_SELECT_WS_END 133 //切换WS结束 //LPARAM根据这个参数进度条上的提示语不一样 #define SELECT_WS_START 0 //开始 #define SELECT_WS_GEN 1 //发生器切换中 #define SELECT_WS_PANEL 2 //探测器切换中 #define SELECT_WS_FAILED 3 //WS切换失败 #define SELECT_WS_SUCCESS 4 //切换成功 //song 2016-04-21 end //LPARAM //Point of CString for ErrorMessage //WPARAM: //平板信息，返回平板数据：温度，信息，图像数据 #define MSG_PANEL_INFO WM_ECOM_HW + 2 //WPARAM: #define ECOM_PANEL_INFO_LEVEL 0 //信息，平板温度等 #define ECOM_PANEL_DATA_LEVEL 1 //图像数据 #define ECOM_PANEL_INFO_BATTERY_CHARGE 2 // the charge of the battery #define ECOM_PANEL_INFO_WIFI_LEVEL 3 // the level of wifi, int percentage #define ECOM_PANEL_INFO_X_WINDOW 4 //the index for x_ray window avaiable time LPARAM: int // #define ECOM_PANEL_INFO_BATTERY_CHARGING 5//3 #define BATTERY_CHARGING 1 #define BATTERY_NOT_CHARGING 0 //code end 20100330 #define ECOM_PANEL_WARN_EVENT 6 //point to CString #define ECOM_PANEL_ERROR_EVENT 7 //point to CString #define ECOM_PANEL_FLAT_IMAGE_CHECK 8 //point to CString #define ECOM_PANEL_DARK_IMAGE_CHECK 9 #define ECOM_PANEL_PREVIEW_DATA_LEVEL 10 #define ECOM_PANEL_INFO_BATTERY_CHARGE_B 11 //双板中第二块电池的电量消息号 #define ECOM_PANEL_INFO_WIFI_LEVEL_B 12 #define ECOM_PANEL_INFO_LEVEL_B 13 //信息，平板温度等 #define ECOM_PANEL_UNIQUE_INFO_LEVEL 14 //song20130913 平板特有的信息，目前应用于varian #define IMAGE_EXI 15 #define IMAGE_STANDARD_EXI 16 #define ECOM_PNL_NOTIFY 17 #define PANEL_ROTATE_X 18 #define PANEL_ROTATE_Y 19 #define PANEL_ROTATE_Z 20 #define PANEL_STOREDIMAGE_LIST 21 #define ECOM_PANEL_AEC_DATA_LEVEL 22 #define IMAGE_FACTOR_EXI_UGY 23 //Code 20140808 #define ECOM_PANEL_CALIB_INFO 24 //校正时，将当前探测器类型及当前校正点，以该消息发给UI #define ECOM_PANEL_INFO_TEMPERATURE 25 //第一块探测器温度 #define ECOM_PANEL_INFO_TEMPERATURE_B 26 //第二块探测器温度 #define ECOM_PANEL_INFO_ORIENTATION_TABLE 27 //第一块探测器方向 #define ECOM_PANEL_INFO_ORIENTATION_WALL 28 //第二块探测器方向 #define ECOM_PANEL_SERIAL_NUMBER 29 //2016-1-108 RPW for flarida #define MASK_INFO 30 //MASK INFO #define ECOM_PANEL_INFO_A 31 // 探测器共享时所有探测器信息 #define SHOCK_SENSOR 32 // #define SHOCK_SENSOR_CLEAR 33 // #define AEC_IMAGE_EXI 34 // #define AEC_IMAGE_FACTOR_PERVIEMAN 35 // #define ECOM_PANEL_INFO_B 36 // 探测器共享时所有探测器信息 #define ECOM_PANEL_INFO_C 37 // 探测器共享时所有探测器信息 #define ECOM_PANEL_IMAGE_DATA 38 //图像数据 #define ECOM_PANEL_PREVIEW_IMAGE_DATA 39 //图像数据 #define ECOM_TRANSLATE_IMAGE_END 40 #define ECOM_PANEL_WINDOW_MODE 41 //设置曝光窗口模式 #define ECOM_PANEL_PIXEL_SPACE 42 //设置探测器的分辨率 //addbyys20191224 为DIOS Adapter增加的初始化结果消息 #define ECOM_PANEL_INFO_INIT 70 #define ECOM_INIT_OK 1 #define ECOM_INIT_FAILED 2 //addend20191224 //addbyys20201118 为DIOS Adapter增加的offset结果消息 #define ECOM_PANEL_INFO_OFFSET 71 #define ECOM_OFFSET_OK 1 #define ECOM_OFFSET_FAILED 2 //addend2019201118 #define ORIENTATION_CLOCKWISE_0 0 //clockwise Retation 0 #define ORIENTATION_CLOCKWISE_90 1 //clockwise Retation 90 #define ORIENTATION_CLOCKWISE_180 2 //clockwise Retation 180 #define ORIENTATION_CLOCKWISE_270 3 //clockwise Retation 270 #define PNL_TEMPER_STATUS 105//探测器温度状态 #define TEMPER_TOO_HIGH 1 //禁止曝光 #define TEMPER_HIGH 2 //不禁止曝光 #define TEMPER_NORMAL 0 #define TEMPER_TOO_LOW -1 #define TEMPER_NA 3 #define TEMPER_CLEAR 4 #define PNL_WIFI_STATUS 106//无线信号强度状态 #define WIFI_TOO_LOW 2 // WIFI太低 #define WIFI_LOW 1 // WIFI低 #define WIFI_NORMAL 0 //满格 #define WIFI_NORMAL_LV1 3 //降一格 #define WIFI_NORMAL_LV2 4 // 降两格 #define WIFI_NA 5 // wifi无法获取 #define WIFI_CLEAR 6 // wifi清空 #define PNL_BATTERY_STATUS 107//电池电量状态 #define BATTERY_TOO_LOW 2 // Battery太低 #define BATTERY_LOW 1 // Battery低 #define BATTERY_NORMAL 0 //满格 #define BATTERY_NORMAL_LV1 3 //降一格 #define BATTERY_NORMAL_LV2 4 // 降两格 #define BATTERY_CLEAR 5 //连接断开时发这个消息将电量信息清空 #define BATTERY__NA 6 //电量无法获取 #define PNL_BATTERY_STATUS_B 108//第二块板的电池电量状态 #define PNL_TEMPER_STATUS_B 109//第二块板的温度状态 #define PNL_WIFI_STATUS_B 110//第二块板的WIFI状态 /*add by song 20140324 当探测器的温度只有正常和不正常两种的情况下. 收到TEMPER_OK在探测器温度显示图标处显示TEMPER_OK； 当收到探测器温度不正常的消息时显示TEMPER_ERROR同时禁止曝光*/ #define TEMPER_OK 0 #define TEMPER_ERROR 1 //禁止曝光 /*add by song 2015-10-9 //第三块板的状态和值的宏定义*/ #define ECOM_PANEL_INFO_BATTERY_CHARGE_C 114 //第三块电池的电量消息号 #define ECOM_PANEL_INFO_WIFI_LEVEL_C 115 //第三块平板的wifi值 #define ECOM_PANEL_INFO_TEMPERATURE_C 116 //第三块探测器温度 #define PNL_BATTERY_STATUS_C 117//第三块板的电池电量状态 #define PNL_TEMPER_STATUS_C 118//第三块板的温度状态 #define PNL_WIFI_STATUS_C 119//第三块板的WIFI状态 //平板状态 #define MSG_PANEL_STATUS WM_ECOM_HW + 3 //WPARAM: #define PNL_COMM_STATUS 0 ///20130322 #define PNL_READY 1 //panel ready #define PNL_WINDOWON 2 //x-ray enable window on #define PNL_WINDOWOFF 3 //x-ray enable window off #define PNL_READING 4 //正在读图 #define PNL_READING_PROGRESS 41 //读图状态 #define PNL_PREPARE 5 //正在准备，如calibration,结束standby等 #define PNL_STANDBY 6 //standby模式 #define PNL_ABORT 7 //放弃曝光 #define PNL_IMGREADY 8 //传输图像结束； #define PNL_WAKEBEGIN 9 //正在唤醒 #define PNL_WAKEEND 10 //已经被唤醒 #define PNL_USB_READY 11 //for CTrixellFS23 detector #define PNL_USB_BUSY 12 //for CTrixellFS23 detector //code begin 20101027 #define PNL_ACTUAL_MODE 13 //indicate panel status 1, Actual connect, 0 demo mode, 2, actual mode, not connected. //code end 20101027 #define PNL_OFSBEGIN 14 //add by wangyb 20130625 #define PNL_OFSEND 15 #define PNL_INIT 16 #define PNL_FAKE_EIPON 17 //added 2008/08/29 #define PNL_ACQ_PREVIEW 20 // Get the preview image, apply in portable3543 //added 2008/09/09 #define PNL_ACQ_FAILED 21 // Failed to acquire image, apply in portable3543 #define PNL_RESET 22 //ReSet panel add code 20121213 by zhang #define PNL_RECOVER_LASTIMAGE 23 #define PNL_WAKEEND2 24 //Panel2, 已经被唤醒 #define PNL_ERROR 25 //add by song20130912 for FDX4343R communication error #define PNL_SYNC_MODE 26 //探测器同步模式 #define PNL_DISCONNECT 27 //断开探测器的结果 #define PNL_CONNECT 28 //连接探测器的结果 #define PNL_UNUPLOADED_IMAGE 29 //探测器内部存有未上传的图像 #define PNL_TRANS_IMG_START 101 // #define PNL_TRANS_IMG_END 102 // #define PNL_COMP_CAL_BEGIN 103 #define PNL_COMP_CAL_END 104 #define PNL_GHOST_CAL_END 105 //校正完成，提示上层保持校正按钮变为使能 song20130704 #define PNL_GHOST_CAL_START 106 #define PNL_PANEL_NUMBER 107 //add by song 2016-4-25 #define PNL_SELECT_END 108 //add by song 2016-4-25 //探测器同步模式定义 #define PNL_SYNC_HARDWARE 0 #define PNL_SYNC_SOFTWARE 1 #define PNL_SYNC_AUTOTRIGER 2 #define RESULT_ERROR 0 #define RESULT_OK 1 // add by song // date:2014-03-24 // 目的: 作为配合PNL_WAKEBEGIN的LParam使用， //根据这个参数的不同界面上弹出对话框显示的信息会有不同*/ #define WAKE_INITIAL 0 //探测器初始化 #define WAKE_SWITCH_PNL 1 //探测器切换 #define WAKE_SWITCH_XWINDOW 2 //曝光窗口切换 #define WAKE_WAKEUP 3 //探测器唤醒 #define WAKE_OFFSET 4 //探测器做offset #define WAKE_RECONNECT 5 //探测器重连 #define WAKE_RECOVER_IMAGE 6 //恢复图像 /*song 2014-03-24 end */ //平板返回的错误信息 #define MSG_PANEL_ERROR WM_ECOM_HW + 4 #define PNL_ERROR_SUCCESS 0 #define PNL_ERROR_INIT 1 //初始化失败 3 #define PNL_ERROR_COMMUNICATION 2 //连接中断或通信失败 3 #define PNL_ERROR_ACQ_NOT_END 3 //曝光失败 2 #define PNL_ERROR_BATTERY 4 //电量低 1 #define PNL_ERROR_WIFI 5 //WIFI低 1 #define PNL_ERROR_TEMPERATURE 6 //温度高 1 #define PNL_ERROR_SELECT_PANEL 7 //切换平板失败 2 #define PNL_ERROR_SLEEPMODE 8 //探测器休眠 2 #define PNL_ERROR_POWEROFF 9 //探测器关闭 3 #define PNL_ERROR_OTHERS 10 //其他 1 #define PNL_ERROR_RECOVER_FAILED 11 //恢复图像失败 #define PNL_ERROR_RECOVER_SUCCESS 12 //恢复图像成功 #define PNL_ERROR_DEFECTMAP_LOST 13 #define PNL_ERROR_GAINMAP_LOST 14 #define PNL_ERROR_DUAL_ACQ_ZERO_IMAGE 15 #define PNL_ERROR_DUAL_ACQ_ONE_IMAGE 16 #define PNL_ERROR_IMAGE_DOSE_LOW 17 #define FPD_RESET_NOTIFY 18 //WPAEAM //#define WARN_INIT 1 //#define WARN_IGNORE 2 //#define WARN_NOTIFY 3 //LPARAM //Point of CString for ErrorMessage //高压发生器的返回的参数设置信息 #define MSG_GEN_PARAM WM_ECOM_HW + 5 //高压发送器返回的曝光同步信息信息 #define MSG_GEN_EXPOSURE WM_ECOM_HW + 6 //WPARAM: #define GEN_COMM_STATUS 0// #define PREPRESS 1 //手闸按下 pr1 #define TUBEREADY 2 //球馆准备好 pr2 //#define XRAYON 5 //出现X射线 xr1 //#define XRAYOFF 6 //X射线停止 xr0 #define RELEASE 3 //松开手闸 pr0 //该消息后的参数可取值为0、1；0：表示正常release； 1表示reset发生器Error之后的release。 //#define EXPOUSUCCESS 7 //曝光成功 //#define EXPOUFAILURE 8 //曝光失败 #define STANDBY 9 //松开手闸 pr0 //code begin 20130911 #define PREPRESS_NOREADY 10 //一级手闸按下，但没有球馆没有准备好 #define PRERELEASE 11 //松开一级手闸 #define GEN_SHUTDOWN 12 //发生器通知退出软件并关闭计算机系统 //code 20140328 #define GEN_PCSLEEP 13 #define GEN_PCWAKEUP 15 #define GEN_PAKING 14 //code end 20130911 //code begin 20170502 #define GEN_PERSHUTDOWN 17 //预关机消息 from device（目前增加给OTC模块） 20170502 #define GEN_CANCLESHUTDOWN 18 //取消关机操作（目前增加给OTC模块） 20170502 避免与HANDSWITCHRELEASE重复 //end 20170502 //高压发生器返回的错误信息 #define MSG_GEN_ERR WM_ECOM_HW + 7 #define MSG_GEN_WARN WM_ECOM_HW + 8 #define GEN_WARNING 0 //For sedecal mobileL:AOF1 command,display warning information 20140326 #define GEN_OFFWARNING 1 //For sedecal mobileL:OFF command，display waring information 2014.5.7 #define MSG_GEN_ERRWARN WM_ECOM_HW + 27 #define MSG_GEN_INFO WM_ECOM_HW + 30 // code 20131029 #define MSG_GEN_INFO_DISEXP WM_ECOM_HW + 31 // generator exp condition error;Forbid expusore //code begin 20170906 #define MSG_GEN_INFO_CIRCLE WM_ECOM_HW + 32 // 消息循环 #define MSG_GEN_ERROR_CIRCLE WM_ECOM_HW + 33 // 错误循环 #define MSG_GEN_WARN_CIRCLE WM_ECOM_HW + 34 // 警告循环 #define MSG_GEN_INFO_SINGLE WM_ECOM_HW + 35 // 消息单次 #define MSG_GEN_ERROR_SINGLE WM_ECOM_HW + 36 // 错误单次 #define MSG_GEN_WARN_SINGLE WM_ECOM_HW + 37 // 警告单次 //code end 20170906 //WPAEAM //point of error code //LPARAM //Point of CString for ErrorMessage #define GEN_SEL_ENABLE 1 #define GEN_SEL_DISABLE 0 #define GEN_AUTO_FOCUS 2 #define GEN_LARGE_FOCUS 1 #define GEN_SMALL_FOCUS 0 #define GEN_ET_MATIME 0 #define GEN_ET_MAS 1 #define GEN_ET_AEC 2 //GEN_ET_AEC3P #define GEN_ET_AEC3P 2 #define GEN_ET_AEC2P 3 #define GEN_ET_AEC1P 4 #define GEN_ET_AEC1P_REDUCEMA 5 #define GEN_PR_INACTIVE 0 #define GEN_PR_ACTIVE 1 #define GEN_PR_READY 2 #define GEN_AECFIELD_000 0 #define GEN_AECFIELD_001 1 #define GEN_AECFIELD_010 10 #define GEN_AECFIELD_100 100 #define GEN_AECFIELD_011 11 #define GEN_AECFIELD_101 101 #define GEN_AECFIELD_110 110 #define GEN_AECFIELD_111 111 #define GEN_AECFILM_000 0 #define GEN_AECFILM_001 1 #define GEN_AECFILM_010 10 #define GEN_AECFILM_100 100 #define GEN_AECFILM_011 11 #define GEN_AECFILM_101 101 #define GEN_AECFILM_110 110 #define GEN_AECFILM_111 111 #define GEN_WS_TABLE 0 #define GEN_WS_WALL 1 #define GEN_WS_CONVENTIONAL 2 #define GEN_WS_CONVENTIONAL_FREE 2 #define GEN_WS_MOBILE 3 #define GEN_WS_FREE_TABLE 3 #define GEN_WS_TOMO 4 #define GEN_WS_CONVENTIONAL_TABLE 5 #define GEN_WS_CONVENTIONAL_WALL 6 #define GEN_WS_FREE_WALL 7 #define GEN_PARAM_KV 0 //kv #define GEN_PARAM_MA 1 //ma #define GEN_PARAM_MS 2 //ms #define GEN_PARAM_MAS 3 //mas #define GEN_PARAM_ER 4 //Warning #define GEN_PARAM_EL 5 //error #define GEN_PARAM_EC 6 //echo #define GEN_PARAM_ST 7 //generator status #define GEN_PARAM_RE 8 //reset #define GEN_PARAM_WS 9 //workstation #define GEN_PARAM_BU 10 //bucky state #define GEN_PARAM_FO 11 //Focus #define GEN_PARAM_ET 12 //exposure mode: MA/Time mode, Ma/Ms mode,AEC mode #define GEN_PARAM_PR 13 //Preparation state //#define GEN_PARAM_PR0 14 //End or Abort Exposure #define GEN_PARAM_XR 15 //Rad Exposure state #define GEN_PARAM_FI 16 //AEC Field #define GEN_PARAM_FS 17 //AEC screen #define GEN_PARAM_FN 18 //AEC Density #define GEN_PARAM_AP 19 //Post AP #define GEN_PARAM_AT 20 //Post Time #define GEN_PARAM_HE 21 //tube heat #define GEN_PARAM_TB 22 //-*-Tube number for calibration #define GEN_PARAM_MC 23 //-*-MA of last calibration #define GEN_PARAM_FC 24 //-*-Filament Current of last calibration exposure. #define GEN_PARAM_CWS 25 //-*-Receptor requested #define GEN_PARAM_CBU 26 //-*-Bucky status for receptor: 0 or 1 #define GEN_PARAM_CTO 27 //-*-Tomo status for receptor #define GEN_PARAM_CFL 28 //-*-Fluoro status for receptor #define GEN_PARAM_CSR 29 //-*-Serial Exposure status for receptor #define GEN_PARAM_CAE 30 //-*-AEC status for receptor #define GEN_PARAM_CFI 31 //-*-AEC Fields enabled for receptor #define GEN_PARAM_CFS 32 //-*-AEC Film Screens enabled for receptor #define GEN_PARAM_KW 33 //Generator KW Rating #define GEN_PARAM_GC 34 //-*-Generator Configuration #define GEN_PARAM_HH 35 //-*- Housing Tube Heat #define GEN_PARAM_GM 36 //-*- programming mode of Generator //#define GEN_PARAM_CA 37 //-*-Auto Calibration state #define GEN_PARAM_DAP 37 //-*-Current DAP accumulated value #define GEN_PARAM_DRF 38 //-*-Current DAP rate value #define GEN_PARAM_DZERO 39 //-*-Acknowledge zeroing DAP #define GEN_PARAM_DT 40 //-*-Current DAP test passed or not 0 = Failed,1 = Passed,2 = Test In progress #define GEN_PARAM_DSTATUS 41 //-*-Current DAP status #define GEN_PARAM_DV 42 //-*-Last DAP Test Value #define GEN_PARAM_AK 44 //Post Post KV code 20130202 #define GEN_PARAM_AM 45 //Post Post MA code 20130202 //code begin 20100421 #define GEN_PARAM_OTC_STATUS 43 //gen otc status //code end 20100421 //#define GEN_PARAM_FNA 44 //add by lv in 20101011, INC DEC AEC Density delete code 20130202 #define GEN_PARAM_AC 48 //Current charge of Capacitor int //code end 20110408 #define GEN_PARAM_MAMMO_AE 49 //Chao Sun Mammo #define GEN_PARAM_MAMMO_FT 50 //Chao Sun Mammo #define GEN_PARAM_MAMMO_FTSZ 51 //Chao Sun Mammo #define GEN_PARAM_MAMMO_DENSITY 52 #define GEN_PARAM_MAMMO_MULTIPLEENERGY 53 #define GEN_PARAM_MAMMO_EP 54 #define GEN_PARAM_MAMMO_POSITIONCODE 55 #define GEN_PARAM_MAMMO_NEEDENABLE 56 #define GEN_PARAM_MAMMO_NEEDDEPTH 57 #define GEN_PARAM_MAMMO_PRESSURESTATE 58 #define GEN_PARAM_MAMMO_WORKSTATE 59 #define GEN_PARAM_MAMMO_MOVESTATE 60 #define GEN_PARAM_MAMMO_ERRORCODE 61 #define GEN_PARAM_MAMMO_MAMMOSTATE 62 //code begin 20120814 #define GEN_PARAM_BC 63 //check if battery is charging int 0: no charge, 1: charge #define GEN_BATTERY_CHARGEVOLTSTATE_YES 1 //正在充电 #define GEN_BATTERY_CHARGEVOLTSTATE_NO 0 //未充电 //code begin 20091223 //code begin 20120814 #define GEN_PARAM_KV_V2 64 //KV for version2 send the address of parameter #define GEN_PARAM_FN_V2 65 //Density for version2 send the address of parameter #define GEN_PARAM_DAP_V2 66 //DAP for version2 send the address of parameter #define GEN_PARAM_GENHEAT 67 //Generator heat, no same as HU #define GEN_PARAM_AECDOSE 68 //Generator AEC dose, for siemens AEC exposure requirment #define GEN_STATUS_NT 70 //-*-Not connect with the generator //code end 20091223 #define GEN_PARAM_POST 71 //-*-Not connect with the generator //NUll //code begin 20130708 //add device status #define GEN_BATTERY_STATUS 72//发生器电池电量状态 #define GEN_BATTERY_CHARGE_NA 7 #define GEN_BATTERY_OUTOFCHARGE 6 #define GEN_BATTERY_EMERGENCY 5 #define GEN_BATTERY_FULL 4 #define GEN_BATTERY_OVER 3 #define GEN_BATTERY_LOW 2 #define GEN_BATTERY_WARNING 1 #define GEN_BATTERY_NORMAL 0 #define GEN_TUBEHU_STATUS 73//发生器球管热容量状态 #define TUBEHU_TOO_HIGH 2 #define TUBEHU_WARNING 1 #define TUBEHU_NORMAL 0 #define TUBEHU_LOW 3 #define TUBEHU_TOO_LOW 4 #define TUBEHU_NA 5 #define VALUE_NA 0xFF //表示无效数值 #define GEN_GENHU_STATUS 74//发生器热量状态 #define GENHU_TOO_HIGH 2 #define GENHU_WARNING 1 #define GENHU_NORMAL 0 //code end 20130708 #define GEN_PARAM_KV_ADJ 75 //kv Adjustment #define GEN_PARAM_MA_ADJ 76 //ma Adjustment #define GEN_PARAM_MS_ADJ 77 //ms Adjustment #define GEN_PARAM_MAS_ADJ 78 //mas Adjustment #define GEN_PARAM_FN_ADJ 79 //AEC Density Adjustment //code begin 20150824 #define GEN_PARAM_PATIENT_BODYSIZE 80 //GEN patient body size #define PATIENT_BODYSIZE_LARGE 4 #define PATIENT_BODYSIZE_MEDIUM 3 #define PATIENT_BODYSIZE_SMALL 2 #define PATIENT_BODYSIZE_PAEDIATRIC 1 //code end 20150824 //code begin 20160411 #define GEN_PARAM_MAMMO_MAMMOPRESSUREVALUE 81 //压迫器压力 #define GEN_PARAM_MAMMO_MAMMOPRESSUREDECOMP 82//自动释放的设定 #define GEN_PARAM_MAMMO_MAMMOAGD 83 //AGD #define GEN_PARAM_MAMMO_MAMMOMECHNICALANGLE 84//机架角度 #define GEN_PARAM_MAMMO_MAMMMECHNICALHEIGH 85//机架高度 //code end 20160411 //code 20160416 #define GEN_PARAM_WS_STATUS 86 #define SEND_WS_STATUS_FAIL 0 #define SEND_WS_STATUS_OK 1 //code end 20160416 #define GEN_REMOTECONTROL 87 #define REMOTECONTROL_ENABLE 1 #define REMOTECONTROL_DISABLE 0 #define GEN_PARAM_FIVE_SEL 88 #define VER_NO_FLIP 0 #define VER_AND_FLIP 1 #define HOR_NO_FLIP 10 #define HOR_AND_FLIP 11 #define GEN_PARAM_MAMMO_PADDLEID 89 #define NO_PADDLE 0 #define BIG_PADDLE 1 #define SMALL_PADDLE 2 #define SPOT_PADDLE 3 #define MSG_POST_DOSE_PARAM WM_ECOM_HW + 20 //2144 //will be implemented soon delegate_ExpPostParamHandler #define GEN_PD_KVP 0 //kv //LPARAM //int #define GEN_PD_MA 1 //ma //Point to float #define GEN_PD_MS 2 //ms //Point to float #define GEN_PD_MAS 3 //mas //Point to float #define GEN_PD_DAP 4 //dap //Point to float //#define GEN_PD_ER 4 //Warning //#define GEN_PD_EL 5 //error //#define GEN_PD_EC 6 //echo #define ERROR_CLEAR 0 #define ERROR_COMMUNICATION 9999 #define ERROR_COMMUNICATION_TRY 9998 #define ERROR_INITIALIZATION 9997 ///////////////////////////////////////////////////////////////////////////////////////////////////////// //STITCHING: //Code begin 20091103 //stitching ctrl device message #define MSG_STITCHING_PARAM WM_ECOM_HW + 28 //Code end 20091103 //Code begin 20091103 #define STITCH_PARAM_SETUP_RECEIVED 0 //Stitching setup received //Info1: configured distance from detector to detector holder outer surface #define STITCH_PARAM_SETUP_AVAIABLE 1 //Setup ok: resulting stitching positions are reachable. #define STITCH_PARAM_SETUP_MOVING 2 //Moving to setup position. #define STITCH_PARAM_SETUP_STOP 3 //Moving to setup position stopped #define STITCH_PARAM_SETUP_REACHED 4 //Setup position reached #define STITCH_PARAM_SETUP_ADJUSTED 5 //Setup position reached and adjusted #define STITCH_PARAM_SETUP_REJECTED 6 //Setup rejected: stitching target positions not reachable #define STITCH_PARAM_SETUP_ADJUST_REJECTED 7 //Setup adjust rejected: redefined positions not reachable. After setup received, the user can change length, overlap, …. #define STITCH_PARAM_SETUP_ADJUST_OK 8 //Setup adjust OK #define STITCH_PARAM_START 9 //Start: remote controller or GUI start button pressed #define STITCH_PARAM_READYTOMOVE 10 //Ready to move to next position. Info1: current image. Info2: total number of images. #define STITCH_PARAM_MOVING_STEP 11 //Moving to next position #define STITCH_PARAM_POSITION_REACHED 12 //Position reached. Info1=current image. Info2=total number of images #define STITCH_PARAM_EXP_READY 13 //Ready to expose. Info1=current image. Info2=total number of images #define STITCH_PARAM_READY_M_EXTRA 14 //Ready to move to extra image #define STITCH_PARAM_MOVEINFG_EXTRA 15 //Moving to extra image #define STITCH_PARAM_EXTRA_IMAGE_REACHED 16 //Extra image reached #define STITCH_PARAM_EXTRA_EXP_READY 17 //Ready to expose extra image #define STITCH_PARAM_FINISHED 18 //Stitching finished #define STITCH_PARAM_CANCEL 19 //Stitching Cancel #define STITCH_PARAM_OFF 20 //Stitching Off #define STITCH_PARAM_EXP_DONE 21 //Exposure Done #define STITCH_PARAM_ACCEPT 22 //Image accept button pressed #define STITCH_PARAM_REJECT 23 //Image reject button pressed #define STITCH_PARAM_TOTAL_IMAGE 24 //total image count #define STITCH_PARAM_CUR_IMAGE 25 //Current image number #define STITCH_PARAM_EXTRA_IMAGE 26 //Extra image number #define STITCH_PARAM_EXIT 27 //end stitching #define STITCH_PARAM_DIRECTION 28 //stitching direction #define STITCH_PARAM_HW_STATUS 29 //hw status, mechanical system status #define HW_NOT_READY 0 #define HW_READY 1 #define STITCH_PARAM_U_FINISHED 30 //uncompelete finish #define MSG_OTC_PARAM WM_ECOM_HW + 29 #define OTC_PARAM_ACCEPT 100+1 //Image accept button pressed #define OTC_PARAM_REJECT 100+2 //Image reject button pressed #define OTC_PARAM_SELECTEDVIEW 100+3 //Select view #define OTC_PARAM_SID 100+4 //the sid from otc side #define OTC_PARAM_ROOM_STATION 100+5 //the workstaton of otc //add by wang 2013/02 just for GMM's ADLINK DAQ Card #define OTC_PARAM_WALL_GRID120 100+6 #define OTC_PARAM_WALL_GRID180 100+7 #define OTC_PARAM_WALL_GRIDABSENT 100+8 //No grid #define OTC_PARAM_WALL_GRIDPARALLEL 100+9 // grid error #define OTC_PARAM_TABLE_GRID120 100+10 #define OTC_PARAM_TABLE_GRID180 100+11 #define OTC_PARAM_TABLE_GRIDABSENT 100+12 #define OTC_PARAM_TABLE_GRIDPARALLEL 100+13 #define OTC_PARAM_WALL_FPD4335 100+14 #define OTC_PARAM_WALL_FPD3543 100+15 #define OTC_PARAM_WALL_FPDABSENT 100+16 #define OTC_PARAM_WALL_FPDPARALLEL 100+17 #define OTC_PARAM_TABLE_FPD4335 100+18 #define OTC_PARAM_TABLE_FPD3543 100+19 #define OTC_PARAM_TABLE_FPDABSENT 100+20 #define OTC_PARAM_TABLE_FPDPARALLEL 100+21 #define OTC_PARAM_EXPOSTATE 100+22 #define OTC_PARAM_DAPRESET 100+23 //code begin 20141024 #define OTC_PARAM_ANGLE_FLOAT 100+24 //add code 20141021 OTC Angle #define OTC_PARAM_SID_FLOAT 100+25 //add code 20141021 OTC SID #define OTC_PARAM_WS 100+26 //add code 20141021 OTC Workstation #define OTC_PARAM_LONGLOCK_STATE 100+27 //OTC Long LOCK; 1:Active; 0:NoActive #define OTC_PARAM_LONGLOCK_START 100+28 //OTC LONG LOCK; 1:ON; 0:OFF #define OTC_PARAM_LONGLOCK_STOP 100+29 //OTC LONG LOCK: 1:ON; 0:OFF #define OTC_PARAM_TRANSLOCK_STATE 100+30 // OTC Trans Lock; 1:Active; 0:NoActive #define OTC_PARAM_TRANSLOCK_START 100+31 // OTC Trans LOCK;1:ON; 0:OFF #define OTC_PARAM_TRANSLOCK_STOP 100+32 // OTC Trans LOCK; 1:ON; 0:OFF //code end 20141024 #define OTC_PARAM_MOVEBUTTON_KEY 100+33 // OTC MOVE BUTTON KEY #define OTC_PARAM_SID_STRING 100+34 //add code 20141112 OTC SID #define OTC_PARAM_AUTOTRACKING 100+35 //add code 20141112 OTC Auto tracking for OTC; 0:No tracking; 1:Tracking; #define OTC_PARAM_READYSTATUS 100+36 //add code 20141119 OTC STRING #define OTC_PARAM_READYSTATUS_CODE 100 + 37 //OTC的READY状态 lparam：0（READY），1（NOT READY） #define OTC_PARAM_FID 100 + 38 #define REJECT_REASON_TEST 1 #define REJECT_REASON_NOUSE 2 #define REJECT_REASON_OTHER 3 #define MSG_OTC_ERROR WM_ECOM_HW + 21 //机架模块的错误 #define OTC_ERROR_INIT 1 //初始化失败 #define OTC_ERROR_CONNECT 2 //连接中断 #define OTC_ERROR_RECONNECT 3 //连接恢复 #define OTC_WARN_INFO 998 //警告信息 单条 #define OTC_ERROR_INFO 999 //错误信息 单条 #define MSG_OTC_WARN_SINGLE WM_ECOM_HW + 22 //警告信息 单条 SINGLE #define MSG_OTC_WARN_CIRCLE WM_ECOM_HW + 23 //警告消息需要循环 #define MSG_OTC_INFO_SINGLE WM_ECOM_HW + 24 //机架模块的错误 SINGLE #define MSG_OTC_INFO_CIRCLE WM_ECOM_HW + 25 //警告消息需要循环 #define MSG_OTC_ERROR_CIRCLE WM_ECOM_HW + 26 //错误信息 单条 //对应OTC_SetExpoState接口 #define OTC_ENABLE_EXPOSE (0) // 可以曝光 #define OTC_XRAYON (1) // 正在出线 #define OTC_DISABLE_EXPOSE (2) // 禁止曝光 #define OTC_XRAYOFF (3) // 曝光停止 ///////////////////////////////////////////////////////////////////////// //同步模块： #define MSG_SYN_STATUS WM_ECOM_HW + 9 //WPARAM: #define SYN_GEN_PREPARE 0 //PR1 #define SYN_GEN_READY 1 //PR2 #define SYN_GEN_OVER 2 //PR0 #define SYN_GEN_EIPON 3 //exposure in progress #define SYN_GEN_EIPOFF 4 //exposure in progress //#define SYN_PNL_READY 5 //AC ready #define SYN_XRAYWINDOW_ON 6 // #define SYN_XRAYWINDOW_OFF 7 // #define SYN_PARAM_RE 8 // reset add code 20121213 by zhang #define SYN_COMM_STATUS 9 #define SYN_RLS_DUALENGRY 10 //针对双能模式下，若仅有单次XPB信号时，在第二次RLS时需要通过该消息，增加HW中的双能曝光次数； #define SYN_DYN_CMD 20 //for DYN Cmd #define SYN_DYN_MSG 21 //for DYN Msg #define SYN_DYN_IO 22 //for DYN IO #define MSG_SYN_SID WM_ECOM_HW + 10 //WPARAM SID in cm #define MSG_SYN_COLLIMATOR WM_ECOM_HW + 11 //WPARAM pointer of collimator struct #define COLLIMATOR_PARAM 1 #define ROI_PARAM 2 #define COLLIMATOR_ZERO 3 //collimator zero whose origin is the left up(0,0) of image; #define MASK_PARAM 4 //mask 点集 #define MSG_SYN_ERROR WM_ECOM_HW + 12 //WPARAM error code point of code string #define SYN_RESET_NOTIFY 0 #define MSG_SYN_BUCKY WM_ECOM_HW+13 //WPARAM #define SYN_BUCKY_PORTRAIT 0 #define SYN_BUCKY_LANDSCAPE 1 #define SYN_BUCKY_UNKNOW 2 //#define SYN_BUCKY_GRID_PRESENT 3 //grid on //#define SYN_BUCKY_GRID_ABSENT 4 //no grid #define MSG_SYN_GRID WM_ECOM_HW+16 #define SYN_GRID_ABSENT 0 #define SYN_GRID_PRESENT 1 //#define SYN_GRID_120 3//deleted 20110711 //#define SYN_GRID_180 2//deleted 20110711 #define SYN_GRID_120 2 #define SYN_GRID_180 3 #define SYN_GRID_UNKNOW 4 #define SYN_GRID_120_ROTATE 5 #define SYN_GRID_PARALLEL 6 #define SYN_GRID_100 7 #define SYN_GRID_150 8 #define SYN_GRID_PARTINSERT 9//Grid partially inserted #define MSG_SYN_STAND WM_ECOM_HW+17 #define SYN_BTCONNECT_LOST 100 // 断开连接 #define SYN_BTCONNECT_CONNECT 101 // 连接 #define MSG_SYN_FILTER WM_ECOM_HW+18 #define SYN_FILTER_0 0 #define SYN_FILTER_1 1 #define SYN_FILTER_2 2 #define SYN_FILTER_3 3 #define SYN_FILTER_4 4 #define SYN_FILTER_5 5 #define SYN_FILTER_6 6 #define MSG_OTC WM_ECOM_HW+19 //WPARAM: #define OTC_NORMAL 0 #define OTC_MANUAL 1 #define OTC_AUTO 2 #define OTC_READY 2 ///////////////////////////////////////////////////////////////////////////// //Barcode Reader #define MSG_CODE_ENTER WM_ECOM_HW+14 //WPARAM point of enter string #define MSG_CODE_ERROR WM_ECOM_HW+15 //WPARAM error code point of code string //add HW status message #define MSG_HW_STATUS WM_ECOM_HW+32 // 1: ready; 0: no ready 20150227 //WPARAM error code point of code string //add Collimator offset value 20160224 #define MSG_SYN_COLLIMATOR_OFFSET WM_ECOM_HW+33 // Collimator offset value ///////////////////////////////////////////////////////////////////////////// //数据流发送的消息 #define WM_ECOM_DF WM_USER + 1200 //DATA FLOW //工作列表刷新完毕 #define MSG_DF_WORKLISTREFRESH WM_ECOM_DF + 0 //数据流执行过程中的错误 #define MSG_DF_NOTIFY WM_ECOM_DF + 1 //WPARAM: //#define ECOM_WARNING 0 //警告，自动处理 //#define ECOM_ERROR 1 //错误，需要处理 #define MSG_FILE_STORED WM_ECOM_DF + 2 //WPARAM //AETITLE //LPARAM //SOPUID #define MSG_FILE_SEND WM_ECOM_DF + 3 #define MSG_FILM_PRINT WM_ECOM_DF + 4 //WPARAM //AETITLE //LPARAM STATIS #define ECOM_SUCCESS 1 #define ECOM_FAILURE 0 #define MSG_SPACE_OUT WM_ECOM_DF + 5 //WPARAM //TotleSpace //LPARAM //FreeSpace #define MSG_KILL_SERVICE WM_ECOM_DF + 6 //WPARAM //WPARAM: //#define ECOM_BEGIN 1 //#define ECOM_PERFORM 2 //#define ECOM_END 3 //给VET用的消息 #define MSG_VET WM_USER + 1300 //WPARAM: #define VET_WEIGHT_KG 1 #define VET_DEPTH_CM 2 #define VET_ANIMAL_CODE 3 #define VET_BODY_AREA 4 #define VET_VIEW 5 #define VET_ANIMAL_SIDE 6 #define ECOM_SETVALUE 5 //kv, ma, ms, //LParam: value //#define VET_A //added 2008/08/29 #define MSG_PNL_ACQUISITION (WM_ECOM_HW + 50) // For portable 3543 //Code begin 20100304 #define MSG_DUAL_ENERGY_PARAM (WM_ECOM_HW + 51)// #define DUALENERGY_ABORT 1//Abort dual energy process #define SECOND_EXP_BEGIN 2 #define DUALENERGY_EXPOSURE_FIRST 3 #define DUALENERGY_EXPOSURE_SECOND 4 #define DUALENERGY_POSTPROCESS_START 10 //code end 2010304 //code begin 20121219 /* DROC STATUS INFORMATION ----------------------------------------------------------------------------------*/ #define HW_NEIN 0 #define HW_SYSTEM_READY 1 #define HW_NO_PATIENT 2 //DFR not ready because no patient is selected #define HW_NO_IMAGE_MEMORY 3 /*DFR not ready because there is not enough image memory available */ #define HW_SERVICE_MODE 4 /*DFR not ready because it is in service mode. */ #define HW_FD_ERROR 5 /*DFR not ready because there is an Detektor error. */ #define HW_FLC_ON_ERROR 6 /*DFR not ready because there is an error concerning the FL-C */ #define HW_ACQ_BLOCKED_BY_HIPAA 7 /*DFR is not ready because it is blocked by HIPAA */ #define HW_NO_OGP_SELECTED 8 /*DFR is not ready because no OGP has been selected. */ #define HW_FD_RECOVERING 9 /*DFR is not ready because the FD is recovering. */ #define HW_NO_FLUORO_RAD_MODE_SELECTED 10 /*DFR not ready for fluoro because rad mode is selected. */ #define HW_FD_TOO_HOT 11 /*DFR is not ready because the Detector is too hot. */ #define HW_NO_XRAY_BEC_FOLDER_PROTECTED 12 /* DFR not ready because the patient's folder is protected. */ #define HW_FLC_IN_DOC_MODE 13 /*FL-C is in Documentation mode */ #define HW_FLC_IN_POSTPROC_MODE 14 /*FL-C is in post processing mode */ #define HW_FD_OFFSET_IN_PROGRESS 15 /*FD offset is in progress */ #define HW_FD_WLAN_TOO_LOW 16 /*For NRF: WLAN power is too low for acquisition. */ #define HW_FLC_EXAM_MANAGER_ACTIVE 17 /*FL-C is in mode Exam Manager */ #define HW_FD_BATTERY_TOO_LOW 18 /*Battery of mobile detector is too low for Acquisition. */ #define HW_LOW_BATT_ACQ_POSSIBLE 19 /*Battery of wireless FD is low but acquisition still possible (for future use) */ #define HW_FD_NOT_IN_OP_STATE 20 /*Detector not in operating state */ #define HW_FD_CONFG_OUT 21 /*Detector configured out */ #define HW_FD_IMG_RECOV 22 /*Detector image recovery in progress */ #define HW_NO_FD_CABLE_FOR_ORTHO 23 /*wi-D BK cable not connected for Ortho acquistion */ #define HW_DFR_ORTHO_UI_NOT_IN_STEP_1 24 /* The Ortho UI (on FLC) is not in step 1; therefore the latest iOrgDaten being */ /*distributed was not the one to be used for next shot (because acq will start */ /* with step 1 always */ /* */ /*--------------------------------------------------------------------------------------------------------------------*/ //code end 20121219 #define MSG_HW_COMM_ENABLE (WM_ECOM_HW + 60)// //code begin 20141107 #define DONGLE_GEN_COMMUNICATION 0x00 #define DONGLE_GEN_NO_COMMUNICATION 0x01 #define DONGLE_REMOVEGRID_NOFUNCTION 0 #define DONGLE_REMOVEGRID_LOW 1 #define DONGLE_REMOVEGRID_MEDIUM 2 #define DONGLE_REMOVEGRID_HIGH 3 #define DONGLE_UMC_GENPARAM_SYNCHR 0x10 #define DONGLE_UMC_VIEWPROTOCOL_SYNCHR 0x20 #define DONGLE_UMC_PREVIEW_SYNCHR 0x40 //code end 20141107