Deliver/include/fpd_header/FPDLogStruct.h

#pragma  once 

enum {
	FPD_LOG = 0,
	FPD_LOG_IMAGE_HEIGHT,
	FPD_LOG_IMAGE_WIDTH,
	FPD_LOG_IMAGE_BITS,
	FPD_LOG_FIRMWARE_VERSION,
	FPD_LOG_SOFTWARE_VERSION,

	FPD_LOG_START_INIT = 14,
	FPD_LOG_INIT_SUCCESS,
	FPD_LOG_INIT_FAILED,
	FPD_LOG_SELECT,
	FPD_LOG_ACTIVED,
	FPD_LOG_NOACTIVED,

	FPD_LOG_START_ACQ = 20,
	FPD_LOG_STOP_ACQ,
	FPD_LOG_EXP_READY,
	FPD_LOG_XWINDOW_ON,
	FPD_LOG_XWINDOW_OFF,
	FPD_LOG_ACQ_END,
	FPD_LOG_ACQ_FAILED,
	FPD_LOG_PREVIEW	,
	FPD_LOG_IMAGE_ARRIVED,

	FPD_LOG_START_CALIB = 32,
	FPD_LOG_START_OFFSET_CALIB,
	FPD_LOG_START_GAIN_CALIB,
	FPD_LOG_START_DEFECT_CALIB,
	FPD_LOG_ACCEPT_CALIB,
	FPD_LOG_REJECT_CALIB,
	FPD_LOG_ABORT_CALIB,
	FPD_LOG_COMPLETE_OFFSET_CALIB,
	FPD_LOG_COMPLETE_GAIN_CALIB,
	FPD_LOG_COMPLETE_DEFECT_CALIB,
	FPD_LOG_CALIB_TIMEOUT,
	FPD_LOG_LOAD_OFFSET_SUCCESS,
	FPD_LOG_LOAD_OFFSET_FAILED,
	FPD_LOG_LOAD_GAIN_SUCCESS,
	FPD_LOG_LOAD_GAIN_FAILED,
	FPD_LOG_LOAD_DEFECT_SUCCESS,
	FPD_LOG_LOAD_DEFECT_FAILED,
	FPD_LOG_LOAD_CALIB_SUCCESS,
	FPD_LOG_LOAD_CALIB_FAILED,

	FPD_LOG_END = 60
};

//0 means call success
static const char *FPDLogStrList[] = {
	"No Error",
	"Detector Image Height",
	"Detector Image Width" ,
	"Detector Image Bits",
	"Detector Firmware version",
	"Detector Software version",//5

	"Detector Wifi SSID",
	"Current Config Calibration Mode ",
	"Current Config Sync Mode ",
	"Detector Type ",
	"Detector Saturation Value ",
	"Detector Config Xwindow time ",
	"Detecotr Last Calibration Data ",
	"Detector IP Address",

	"Start to Init Detector", //14
	"Init Detector Success",
	"Init Detector Failed",
	"Start to Select Detector",
	"Select Detector Success",
	"Select Detector Failed",

	"Start to Acquisite Image", //20
	"Stop to Acquisite Image",
	"Detector Exposure is READY",
	"Xwindow is on",
	"Xwindow is off",
	"Detector Acquisite Image Success",
	"Detector Acquisite Image Failed",
	"Preview Image is arrived",
	"Full Image is arrived",
	"Acquire Image Failed,please check and recover image",
	"Recover Image Success",
	"Recover Image Failed,please check and recover image",

	"Start to Calibrate Detector", //32
	"Start to Offset Calibration",
	"Start to Gain Calibration",
	"Start to Defect Calibration",
	"Accept Calibration Image",
	"Reject Calibration Image",
	"Abort Calibration",
	"Complete Offset Calibration",
	"Complete Gain Calibration",
	"Complete Defect Calibration",
	"Calibration is Time Out",
	"Load Offset Calibration File Success",
	"Load Offset Calibration File Failed",
	"Load Gain Calibration File Success",
	"Load Gain Calibration File Failed",
	"Load Defect Calibration File Success",
	"Load Defect Calibration File Failed",
	"Load Calibration File Success",
	"Load Calibration File Failed",
	"The communication with detector has problem"

};