PhysicalDevice/Detector/Yuying/DIOS.Dev.FPD.YuyingDR/YuyingCtrl.cpp

#include "stdafx.h"
#include <tlhelp32.h>
#include "sys\stat.h"
#include <fstream>  //文件流库函数
#include <atlcomtime.h>
#include "YuyingCtrl.h"
#include "common_api.h"
#include "CiniFile.h"
#include "MyPingip.h"
#include "CiniFile.h"

extern Log4CPP::Logger* //mLog::gLogger;

#include <shlwapi.h>
#pragma comment(lib, "Shlwapi.lib")
#pragma comment(lib, "Version.lib")


YuyingCtrl* g_pYuyingCtrl = nullptr;


YuyingCtrl::YuyingCtrl()
	:m_hYuyingModule(nullptr),
	API_YI_Initialize_FPD_V4(nullptr),
	API_YI_FPD_Set_Work_Mode(nullptr),
	API_YI_FPD_Stop_Capture_Image(nullptr),
	API_YI_FPD_Get_Configure_Common(nullptr),
	API_YI_FPD_Set_Configure_Common(nullptr),
	API_YI_FPD_Get_Configure_SyncOut_Mode(nullptr),
	API_YI_FPD_Set_Configure_SyncOut_Mode(nullptr),
	API_YI_FPD_Restore_Factory_Settings(nullptr),
	API_YI_FPD_Subtract_Offset(nullptr),
	API_YI_ImageReady_Callback_Register(nullptr),
	API_YI_ImageReady_Callback_Register_Ex(nullptr),
	API_YI_SystemInfo_Callback_Register(nullptr),
	API_YI_SystemInfo_Callback_Register_Ex(nullptr),
	API_YI_Get_Callback_Image_Size(nullptr),
	API_YI_GetLastErrorCode(nullptr),
	API_YI_Set_Save_Log_Flag(nullptr),
	API_YI_GetLoacalIPs_V4(nullptr),
	API_YI_Set_Image_Save_State(nullptr),
	API_YI_Set_Image_Save_Path(nullptr),
	API_YI_FPD_Get_FPD_TYPE(nullptr),
	API_YI_FPD_Get_Invalid_Region(nullptr),
	API_YI_FPD_Capture_Image(nullptr),
	API_YI_FPD_Capture_Prepare(nullptr),
	API_YI_Load_Gain_Tmp_File(nullptr),
	API_YI_Load_Defect_Tmp_File(nullptr),
	API_YI_Load_Offset_Tmp_File(nullptr),
	API_YI_Load_AED_Offset_Tmp_File(nullptr),
	API_YI_Set_Correct_Type(nullptr),
	API_YI_FPD_DO_Correction(nullptr),
	API_YI_FPD_Wifi_Re_Connect(nullptr),
	API_YI_FPD_Wifi_Set_Work_Mode(nullptr),
	API_YI_FPD_Wifi_Get_Work_Mode(nullptr),
	API_YI_FPD_Wifi_Set_Name(nullptr),
	API_YI_FPD_Wifi_Set_Power_Down(nullptr),
	API_YI_FPD_Wifi_Set_IP_Address(nullptr),
	API_YI_FPD_Wifi_Set_Route_Info(nullptr),
	m_strAppPath{},
	m_strWorkPath{},
	m_nPanelCount{},
	m_nDetectorID(1),
	m_nDetectorIndex{},
	m_nUpdateFPDID{},
	m_nCurrentMode(-1),
	m_nSaveRaw{},
	m_bInitialing(false),
	m_bInCalibrating(false),
	m_bInExposure(false),
	m_nSID(180),
	m_fFactorEXI2UGY{},
	m_pHardwareStatusThread(nullptr),
	m_hEndHWStatusThreadEvent(nullptr),
	m_hHWStatusThreadEndEvent(nullptr),
	m_pCurrentDPC(nullptr),
	m_eAppStatus(APP_STATUS_IDLE),
	m_nImageWidth{},
	m_nImageHeight{},
	m_nRawImgWidth{},
	m_nRawImgHeight{},
	m_nTopOffset{},
	m_nBottomOffset{},
	m_nLeftOffset{},
	m_nRightOffset{},
	m_nImgBits(16),
	m_nPixelPitch(150),
	m_bPreviewEnable(false),
	m_nPreviewWidth{},
	m_nPreviewHeight{},
	m_pImgBuffer(nullptr),
	m_pwRawImageData(nullptr),
	m_pwPreviewImg(nullptr),
	m_fCurrentDose(0.0f),
	m_hExitEvent(nullptr),
	m_hRecoverImage(nullptr),
	m_hCofirmCalib(nullptr),
	m_hEndCalibEvent(nullptr),
	m_hYuyingScanEnd(nullptr),
	m_hSharedEvent(nullptr),
	m_hWindowOffEvent(nullptr),
	m_pOffsetThread(nullptr),
	m_pXWindowoffThread(nullptr),
	m_hScanEventThread(nullptr),
	m_nCalibDueSetting{},
	m_nCalibStatus{},
	m_nDoseParam{},
	m_nCalibrationMode{},
	m_nDefectExpTimes{},
	m_nDefectTotalTimes{},
	m_nGainExpTimes{},
	m_nGainTotalFrames{},
	m_nDefectTotalFrames{}
{
	m_hInitThread = nullptr;
	m_hScanEventThread = nullptr;
	m_pDPC2PanelID = new map<nsDPC::FPDDeviceYuying*, int>();
	m_pPanelID2DPC = new map<int, nsDPC::FPDDeviceYuying*>();
	m_vecDetectorID.clear();
	
	m_eCaliType = CCOS_CALIBRATION_TYPE_NONE;

	for (int i = 0; i < Yuying_SCAN_NUM; i++)
	{
		m_hArrayEvent[i] = nullptr;
	}
}

YuyingCtrl::~YuyingCtrl()
{
	OnEXIT();

	if (m_pImgBuffer)
	{
		delete[] m_pImgBuffer;
		m_pImgBuffer = nullptr;
	}

	delete m_pDPC2PanelID;
	m_pDPC2PanelID = nullptr;

	delete m_pPanelID2DPC;
	m_pPanelID2DPC = nullptr;
}

bool YuyingCtrl::OnEXIT()
{
	SetEvent(m_hEndHWStatusThreadEvent);
	//mLog::FINFO("Waiting HWStatus Thread End");
	int nResult = WaitForSingleObject(m_hHWStatusThreadEndEvent, 10000);
	if (WAIT_TIMEOUT == nResult)
	{
		//mLog::FERROR("Yuying HWStatus Thread Quit Failed");
	}
	else
	{
		//mLog::FINFO("Yuying HWStatus Thread Quit Success");
	}

	SetEvent(m_hExitEvent);
	//mLog::FINFO("Waiting Yuying ScanEvent Thread End");
	nResult = WaitForSingleObject(m_hYuyingScanEnd, 2000);
	if (WAIT_TIMEOUT == nResult)
	{
		//mLog::FERROR("Yuying ScanEvent Thread Quit Failed");
	}
	else
	{
		//mLog::FINFO("Yuying ScanEvent Thread Quit Success");
	}
	DeleteHandle();
	//mLog::FINFO("Free Yuying DLL");
	FreeYuyingDLL();

	return true;
}

void YuyingCtrl::DeleteHandle()
{
	if (m_hSharedEvent)
	{
		CloseHandle(m_hSharedEvent);
		m_hSharedEvent = nullptr;
	}

	if (m_hExitEvent)
	{
		CloseHandle(m_hExitEvent);
		m_hExitEvent = nullptr;
	}

	if (m_hRecoverImage)
	{
		CloseHandle(m_hRecoverImage);
		m_hRecoverImage = nullptr;
	}

	if (m_hCofirmCalib)
	{
		CloseHandle(m_hCofirmCalib);
		m_hCofirmCalib = nullptr;
	}

	if (m_hEndCalibEvent)
	{
		CloseHandle(m_hEndCalibEvent);
		m_hEndCalibEvent = nullptr;
	}

	if (m_hYuyingScanEnd)
	{
		CloseHandle(m_hYuyingScanEnd);
		m_hYuyingScanEnd = nullptr;
	}

	if (m_hHWStatusThreadEndEvent)
	{
		CloseHandle(m_hHWStatusThreadEndEvent);
		m_hHWStatusThreadEndEvent = nullptr;
	}

	if (m_pwPreviewImg)
	{
		delete[] m_pwPreviewImg;
		m_pwPreviewImg = nullptr;
	}

	if (m_pwRawImageData)
	{
		delete[] m_pwRawImageData;
		m_pwRawImageData = nullptr;
	}
}

//等到SDK回调返回true, 超时返回false
bool YuyingCtrl::WaitRespond(int nTimeOut, const char* szPosition)
{
	//mLog::FINFO("---{$} Wait Respond---: {$}ms", nTimeOut);
	DWORD nResult = WaitForSingleObject(m_hSharedEvent, nTimeOut);
	if (WAIT_TIMEOUT == nResult)
	{
		//mLog::FWARN("Timeout in wait respond");
		ResetEvent(m_hSharedEvent);
		return false;
	}
	ResetEvent(m_hSharedEvent);
	return true;
}

void YuyingCtrl::SendNotify(const char* szPosition)
{
	//mLog::FINFO("---{$} Get Respond ---", szPosition);
	SetEvent(m_hSharedEvent);
}

void YuyingCtrl::ResetLock()
{
	ResetEvent(m_hSharedEvent);
}

bool YuyingCtrl::Init(string strAppPath)
{
	m_strAppPath = strAppPath;
	m_strWorkPath = strAppPath + (string)m_ModeConfig["SDKPath"];
	//mLog::FINFO("YuyingCtrl::Init {$}\n", m_strWorkPath.c_str());
	if (!LoadYuyingDLL(m_strWorkPath))
	{
		//mLog::FERROR("YuyingCtrl::Init  LoadYuyingDLL failed\n");
		return false;
	}

	m_hSharedEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
	m_hYuyingScanEnd = CreateEvent(NULL, FALSE, FALSE, NULL);
	m_hWindowOffEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
	m_hHWStatusThreadEndEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
	m_hExitEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
	m_hRecoverImage = CreateEvent(NULL, FALSE, FALSE, NULL);
	m_hCofirmCalib = CreateEvent(NULL, FALSE, FALSE, NULL);
	m_hEndCalibEvent = CreateEvent(NULL, FALSE, FALSE, NULL);

	m_hArrayEvent[0] = m_hExitEvent;
	m_hArrayEvent[1] = m_hRecoverImage;
	m_hArrayEvent[2] = m_hCofirmCalib;
	m_hArrayEvent[3] = m_hEndCalibEvent;

	//mLog::FINFO("YuyingCtrl::Init over\n");
	return true;
}

//启动初始化线程
void YuyingCtrl::StartInitFPDThread()
{
	//mLog::FINFO("Start Init Thread");

	DWORD unThreadID;
	if (m_hInitThread == nullptr)
	{
		m_hInitThread = CreateThread(0, 0, onInitPanel, this, 0, &unThreadID);
		if (m_hInitThread == nullptr)
		{
			//mLog::FWARN("Start Init Thread FERROR");
		}
	}
}

//初始化
DWORD YuyingCtrl::onInitPanel(void* pParam)
{
	YuyingCtrl* pInstance = (YuyingCtrl*)pParam;
	pInstance->Action_Init();
	pInstance->m_hInitThread = nullptr;
	return true;
}

void YuyingCtrl::Action_Init()
{
	//mLog::FINFO("YuyingCtrl::Action_Init");
	m_bInitialing = true;

	for (int nID = 0; nID < m_nPanelCount; nID++) //连接多板
	{
		int nDetectorID = nID + 1;
		//mLog::FINFO("Start init Detector: {$}", nDetectorID);
		if (!DetectorInitProcess(nDetectorID))
		{
			//mLog::FERROR("Init process failed");
		}
	}

	YuyingScanEventThread();
	m_bInitialing = false;
	//mLog::FINFO("Action init over\n");
}

//初始化连接探测器
bool YuyingCtrl::DetectorInitProcess(int nDetectorID, bool bFDAttach)
{
	int nDetectorIndex = nDetectorID - 1;
	bool bPingSucces = false;
	int nPingTotalTime = 30; //ping不通，一次约2s，共30次，1分钟左右超时
	for (int nPingTimes = 0; nPingTimes < nPingTotalTime; nPingTimes++)
	{
		bPingSucces = IsConnected(m_stDeviceIndex[nDetectorIndex].strWiredIP);
		if (bPingSucces)
		{
			//mLog::FINFO("Ping Detector successfully");
			break;
		}
		Sleep(2000);
	}

	//ping不通就不用连接了
	if (!bPingSucces)
	{
		//mLog::FERROR("Ping detector failed, timeout!!!");
		return false;
	}

	StatusFeedback(EVT_STATUS_INIT, PANEL_EVENT_START, "");
	string strLocalIP = m_stDeviceIndex[nDetectorIndex].strLocalIP;
	int nLocalPort = 28000;
	string strRemoteIP = m_stDeviceIndex[nDetectorIndex].strWiredIP;
	int nRemotePort = 27999;
	char szDetectorID[100] = { 0 };
	//mLog::FINFO("LocalIP: {$}:28000, RemoteIP: {$}:27999", strLocalIP, strRemoteIP);
	int nRet = API_YI_Initialize_FPD_V4(strLocalIP.c_str(), nLocalPort, strRemoteIP.c_str(), nRemotePort, szDetectorID);
	if (TestError(nDetectorID, nRet, "API_YI_Initialize_FPD_V4"))
	{
		//mLog::FERROR("Connect Detector {$} Failed", nDetectorID);
		StatusFeedback(EVT_STATUS_INIT, PANEL_EVENT_END_ERROR, "");
		return false;
	}
	m_stDeviceIndex[nDetectorIndex].nDetectorID = nDetectorID;
	m_stDeviceIndex[nDetectorIndex].bConnectStatus = true;
	m_stDeviceIndex[nDetectorIndex].bInitOK = true;
	m_vecDetectorID.push_back(szDetectorID);
	//mLog::FINFO("Connect Detector {$} Success", nDetectorID);

	nRet = API_YI_Set_Save_Log_Flag(m_stDeviceIndex[nDetectorIndex].bSDKSaveLog, m_stDeviceIndex[nDetectorIndex].strSDKSaveLogPath.c_str());
	if (TestError(nDetectorID, nRet, "SaveLog"))
	{
		//mLog::FERROR("{$} SDK save log failed!!! path: {$} ", (m_stDeviceIndex[nDetectorIndex].bSDKSaveLog ? "Enable" : "Disable"),
			m_stDeviceIndex[nDetectorIndex].strSDKSaveLogPath);
	}
	else
	{
		//mLog::FINFO("{$} SDK save log success, path: {$}", (m_stDeviceIndex[nDetectorIndex].bSDKSaveLog ? "Enable" : "Disable"),
			m_stDeviceIndex[nDetectorIndex].strSDKSaveLogPath);
	}
	
	nRet = API_YI_Set_Image_Save_Path(szDetectorID, m_stDeviceIndex[nDetectorIndex].strSDKSaveRawPath.c_str());
	nRet |= API_YI_Set_Image_Save_State(szDetectorID, m_stDeviceIndex[nDetectorIndex].bSDKSaveRaw);
	if (TestError(nDetectorID, nRet, "SaveRaw"))
	{
		//mLog::FERROR("{$} SDK save raw image failed!!! path: {$} ", (m_stDeviceIndex[nDetectorIndex].bSDKSaveRaw ? "Enable" : "Disable"),
			m_stDeviceIndex[nDetectorIndex].strSDKSaveRawPath);
	}
	else
	{
		//mLog::FINFO("{$} SDK save raw image success, path: {$}", (m_stDeviceIndex[nDetectorIndex].bSDKSaveRaw ? "Enable" : "Disable"),
			m_stDeviceIndex[nDetectorIndex].strSDKSaveRawPath);
	}

	//获取尺寸
	int nWidth = 0;
	int nHeight = 0;
	int nBits = 0;
	nRet = API_YI_Get_Callback_Image_Size(szDetectorID, nWidth, nHeight, nBits);
	if (TestError(nDetectorID, nRet, "API_YI_Get_Callback_Image_Size"))
	{
		//mLog::FERROR("Get detector({$}) image size failed", nDetectorID);
	}
	else
	{
		//mLog::FINFO("Get detector image size: {$}x{$}x{$}", nWidth, nHeight, nBits);
	}

	//注册回调
	nRet = API_YI_ImageReady_Callback_Register(szDetectorID, nullptr);
	if (TestError(nDetectorID, nRet, "API_YI_ImageReady_Callback_Register"))
	{
		//mLog::FERROR("Reset ImageReadyCallbackProcess failed!!!");
	}
	else
	{
		//mLog::FINFO("Reset ImageReadyCallbackProcess success");
	}
	nRet = API_YI_SystemInfo_Callback_Register(szDetectorID, nullptr);
	if (TestError(nDetectorID, nRet, "API_YI_SystemInfo_Callback_Register"))
	{
		//mLog::FERROR("Reset SystemInfoCallbackProcess failed!!!");
	}
	else
	{
		//mLog::FINFO("Reset SystemInfoCallbackProcess success");
	}

	nRet = API_YI_ImageReady_Callback_Register(szDetectorID, ImageReadyCallbackProcess);
	if (TestError(nDetectorID, nRet, "API_YI_ImageReady_Callback_Register"))
	{
		//mLog::FERROR("Register ImageReadyCallbackProcess failed!!!");
	}
	else
	{
		//mLog::FINFO("Register ImageReadyCallbackProcess success");
	}
	nRet = API_YI_SystemInfo_Callback_Register(szDetectorID, SystemInfoCallbackProcess);
	if (TestError(nDetectorID, nRet, "API_YI_SystemInfo_Callback_Register"))
	{
		//mLog::FERROR("Register SystemInfoCallbackProcess failed!!!");
	}
	else
	{
		//mLog::FINFO("Register SystemInfoCallbackProcess success");
	}

	//读取或设置common参数
	YIConfigInfo_Common stConfigCommon = { 0 };
	nRet = API_YI_FPD_Get_Configure_Common(szDetectorID, 1, &stConfigCommon);
	if (TestError(nDetectorID, nRet, "API_YI_FPD_Get_Configure_Common"))
	{
		//mLog::FERROR("Get detector common config failed!!!");
	}
	else
	{
		//mLog::FINFO("Get detector common config success");
		//mLog::FINFO("DetectorSN: {$}; FPGA version: {$}; MCU version: {$}; NetWork: {$}:{$}", 
			stConfigCommon.arrProductInitSN, stConfigCommon.arrFPGAVerMain, stConfigCommon.arrMCUVerMain, stConfigCommon.arrLocalIPAddress, stConfigCommon.usLocalUDPPort);
	}

	//读取syncout参数
	YIConfigInfo_SyncOut stConfigSyncOut = { 0 };
	nRet = API_YI_FPD_Get_Configure_SyncOut_Mode(szDetectorID, 0, 1, &stConfigSyncOut);
	if (TestError(nDetectorID, nRet, "API_YI_FPD_Get_Configure_SyncOut_Mode"))
	{
		//mLog::FERROR("Get detector syncmode config failed!!!");
	}
	else
	{
		//mLog::FINFO("Get detector syncmode config success");
		//mLog::FINFO("ExpWindow: {$}; ExpTimeout: {$}; ", stConfigSyncOut.usExposureWindow, stConfigSyncOut.usExposureTimeOut);
	}

	//加载模板
	FPDLoadCorrectFiles(nDetectorID, szDetectorID);

	//设置工作模式
	SetDetectorWorkMode(nDetectorID, szDetectorID, m_stDeviceIndex[nDetectorIndex].nSyncMode);

	StatusFeedback(EVT_STATUS_INIT, PANEL_EVENT_END_OK, "");
	return true;
}

/************************************************************************************
功能：启动线程，处理一些异步消息
************************************************************************************/
void YuyingCtrl::YuyingScanEventThread()
{
	if (m_hScanEventThread != nullptr)
	{
		//mLog::FINFO("ScanEvent Thread already run");
		return;
	}
	//mLog::FINFO("Start ScanEvent Thread");
	DWORD unThreadID;
	m_hScanEventThread = (HANDLE)CreateThread(NULL, 0, onScanEvent, (LPVOID)this, 0, &unThreadID);
	if (m_hScanEventThread == nullptr)
	{
		//mLog::FWARN("Start Scan Event FERROR");
	}
	else
	{
		//mLog::FINFO("Start ScanEvent Thread ok");
	}
}

/************************************************************************************
功能：启动线程，处理一些异步消息
m_hRecoverImage 异步，恢复图像
m_hCofirmCalib 异步，确认每一次校正的结果，如剂量大了/小了/
m_hReconnectFD 异步，初始化探测器
************************************************************************************/
DWORD YuyingCtrl::onScanEvent(void* pParam)
{
	YuyingCtrl* pInstance = (YuyingCtrl*)pParam;

	if (pInstance == nullptr)
	{
		return false;
	}
	bool bExitFlag = true;
	while (bExitFlag)
	{
		//mLog::FINFO("( Waiting for Signal...)");
		DWORD dwResult = WaitForMultipleObjects(Yuying_SCAN_NUM, pInstance->m_hArrayEvent, FALSE, INFINITE);
		if (WAIT_OBJECT_0 == dwResult) //m_hExitEvent
		{
			//mLog::FINFO("Get Exit Event");
			bExitFlag = false;
		}
		else if (WAIT_OBJECT_0 + 1 == dwResult)  //m_hRecoverImage
		{
			//mLog::FINFO("Get RecoverImage Event");
			pInstance->RecoverLastImageAuto();
		}
		else if (WAIT_OBJECT_0 + 2 == dwResult) //m_hCofirmCalib
		{
			//mLog::FINFO("Get Cofirm Calibration Event");
			pInstance->ConfirmCalibration();
		}
		else if (WAIT_OBJECT_0 + 3 == dwResult) //m_hEndCalibEvent
		{
			//mLog::FINFO("Get EndCalibraion Event");
			pInstance->OnEndCalibraion();
		}
	}
	SetEvent(pInstance->m_hYuyingScanEnd);
	//mLog::FINFO("Yuying ScanEvent Thread End");
	return true;
}

//接口成功返回false，接口失败或有错返回true
bool YuyingCtrl::TestError(int nDetectorID, int nErrorStatus, std::string strAPI)
{
	switch (nErrorStatus)
	{
		case 0:
		{
			SystemErrorCode nErrorCode = SEC_Succeed;
			nErrorCode = (SystemErrorCode)API_YI_GetLastErrorCode();
			//mLog::FWARN("{$} Failed!!! ErrorCode: {$}", strAPI.c_str(), (int)nErrorCode);
			return true;
			break;
		}
		case 1:
		{
			//mLog::FDEBUG("{$} Success", strAPI);
			return false;
			break;
		}
		default:
			break;
		}
	return true;
}

bool YuyingCtrl::LoadYuyingDLL(string strWorkPath)
{
	string strDllDir = strWorkPath;
	if (SetDllDirectory(strDllDir.c_str()) == 0)
	{
		DWORD dw = GetLastError();
		//mLog::FINFO("SetDllDirectory error,error code [{$}]", dw);
		return false;
	}

	string strDllPath = strWorkPath + "\\YuYingAPI.dll";
	//mLog::FINFO("Load Yuying API");
	m_hYuyingModule = LoadLibrary(strDllPath.c_str());

	if (nullptr == m_hYuyingModule)
	{
		//mLog::FWARN("Load Yuying API failed!");
		return false;
	}

	API_YI_Initialize_FPD_V4 = (Func_YI_Initialize_FPD_V4)GetProcAddress(m_hYuyingModule, "YI_Initialize_FPD_V4");
	if (nullptr == API_YI_Initialize_FPD_V4)
	{
		//mLog::FWARN("Load YI_Initialize_FPD_V4 failed!");
		return false;
	}
	API_YI_FPD_Set_Work_Mode = (Func_YI_FPD_Set_Work_Mode)GetProcAddress(m_hYuyingModule, "YI_FPD_Set_Work_Mode");
	if (nullptr == API_YI_FPD_Set_Work_Mode)
	{
		//mLog::FWARN("Load YI_FPD_Set_Work_Mode failed!");
		return false;
	}
	API_YI_FPD_Stop_Capture_Image = (Func_YI_FPD_Stop_Capture_Image)GetProcAddress(m_hYuyingModule, "YI_FPD_Stop_Capture_Image");
	if (nullptr == API_YI_FPD_Stop_Capture_Image)
	{
		//mLog::FWARN("Load YI_FPD_Stop_Capture_Image failed!");
		return false;
	}
	API_YI_FPD_Get_Configure_Common = (Func_YI_FPD_Get_Configure_Common)GetProcAddress(m_hYuyingModule, "YI_FPD_Get_Configure_Common");
	if (nullptr == API_YI_FPD_Get_Configure_Common)
	{
		//mLog::FWARN("Load YI_FPD_Get_Configure_Common failed!");
		return false;
	}
	API_YI_FPD_Set_Configure_Common = (Func_YI_FPD_Set_Configure_Common)GetProcAddress(m_hYuyingModule, "YI_FPD_Set_Configure_Common");
	if (nullptr == API_YI_FPD_Set_Configure_Common)
	{
		//mLog::FWARN("Load YI_FPD_Set_Configure_Common failed!");
		return false;
	}
	API_YI_FPD_Get_Configure_SyncOut_Mode = (Func_YI_FPD_Get_Configure_SyncOut_Mode)GetProcAddress(m_hYuyingModule, "YI_FPD_Get_Configure_SyncOut_Mode");
	if (nullptr == API_YI_FPD_Get_Configure_SyncOut_Mode)
	{
		//mLog::FWARN("Load YI_FPD_Get_Configure_SyncOut_Mode failed!");
		return false;
	}
	API_YI_FPD_Set_Configure_SyncOut_Mode = (Func_YI_FPD_Set_Configure_SyncOut_Mode)GetProcAddress(m_hYuyingModule, "YI_FPD_Set_Configure_SyncOut_Mode");
	if (nullptr == API_YI_FPD_Set_Configure_SyncOut_Mode)
	{
		//mLog::FWARN("Load YI_FPD_Set_Configure_SyncOut_Mode failed!");
		return false;
	}
	API_YI_FPD_Restore_Factory_Settings = (Func_YI_FPD_Restore_Factory_Settings)GetProcAddress(m_hYuyingModule, "YI_FPD_Restore_Factory_Settings");
	if (nullptr == API_YI_FPD_Restore_Factory_Settings)
	{
		//mLog::FWARN("Load YI_FPD_Restore_Factory_Settings failed!");
		return false;
	}
	API_YI_FPD_Subtract_Offset = (Func_YI_FPD_Subtract_Offset)GetProcAddress(m_hYuyingModule, "YI_FPD_Subtract_Offset");
	if (nullptr == API_YI_FPD_Subtract_Offset)
	{
		//mLog::FWARN("Load YI_FPD_Subtract_Offset failed!");
		return false;
	}
	API_YI_ImageReady_Callback_Register = (Func_YI_ImageReady_Callback_Register)GetProcAddress(m_hYuyingModule, "YI_ImageReady_Callback_Register");
	if (nullptr == API_YI_ImageReady_Callback_Register)
	{
		//mLog::FWARN("Load YI_ImageReady_Callback_Register failed!");
		return false;
	}
	API_YI_ImageReady_Callback_Register_Ex = (Func_YI_ImageReady_Callback_Register_Ex)GetProcAddress(m_hYuyingModule, "YI_ImageReady_Callback_Register_Ex");
	if (nullptr == API_YI_ImageReady_Callback_Register_Ex)
	{
		//mLog::FWARN("Load YI_ImageReady_Callback_Register_Ex failed!");
		return false;
	}
	API_YI_SystemInfo_Callback_Register = (Func_YI_SystemInfo_Callback_Register)GetProcAddress(m_hYuyingModule, "YI_SystemInfo_Callback_Register");
	if (nullptr == API_YI_SystemInfo_Callback_Register)
	{
		//mLog::FWARN("Load YI_SystemInfo_Callback_Register failed!");
		return false;
	}
	API_YI_SystemInfo_Callback_Register_Ex = (Func_YI_SystemInfo_Callback_Register_Ex)GetProcAddress(m_hYuyingModule, "YI_SystemInfo_Callback_Register_Ex");
	if (nullptr == API_YI_SystemInfo_Callback_Register_Ex)
	{
		//mLog::FWARN("Load YI_SystemInfo_Callback_Register_Ex failed!");
		return false;
	}
	API_YI_Get_Callback_Image_Size = (Func_YI_Get_Callback_Image_Size)GetProcAddress(m_hYuyingModule, "YI_Get_Callback_Image_Size");
	if (nullptr == API_YI_Get_Callback_Image_Size)
	{
		//mLog::FWARN("Load YI_Get_Callback_Image_Size failed!");
		return false;
	}
	API_YI_GetLastErrorCode = (Func_YI_GetLastErrorCode)GetProcAddress(m_hYuyingModule, "YI_GetLastErrorCode");
	if (nullptr == API_YI_GetLastErrorCode)
	{
		//mLog::FWARN("Load YI_GetLastErrorCode failed!");
		return false;
	}
	API_YI_Set_Save_Log_Flag = (Func_YI_Set_Save_Log_Flag)GetProcAddress(m_hYuyingModule, "YI_Set_Save_Log_Flag");
	if (nullptr == API_YI_Set_Save_Log_Flag)
	{
		//mLog::FWARN("Load YI_Set_Save_Log_Flag failed!");
		return false;
	}
	API_YI_GetLoacalIPs_V4 = (Func_YI_GetLoacalIPs_V4)GetProcAddress(m_hYuyingModule, "YI_GetLoacalIPs_V4");
	if (nullptr == API_YI_GetLoacalIPs_V4)
	{
		//mLog::FWARN("Load YI_GetLoacalIPs_V4 failed!");
		return false;
	}
	API_YI_Set_Image_Save_State = (Func_YI_Set_Image_Save_State)GetProcAddress(m_hYuyingModule, "YI_Set_Image_Save_State");
	if (nullptr == API_YI_Set_Image_Save_State)
	{
		//mLog::FWARN("Load YI_Set_Image_Save_State failed!");
		return false;
	}
	API_YI_Set_Image_Save_Path = (Func_YI_Set_Image_Save_Path)GetProcAddress(m_hYuyingModule, "YI_Set_Image_Save_Path");
	if (nullptr == API_YI_Set_Image_Save_Path)
	{
		//mLog::FWARN("Load YI_Set_Image_Save_Path failed!");
		return false;
	}
	API_YI_FPD_Get_FPD_TYPE = (Func_YI_FPD_Get_FPD_TYPE)GetProcAddress(m_hYuyingModule, "YI_FPD_Get_FPD_TYPE");
	if (nullptr == API_YI_FPD_Get_FPD_TYPE)
	{
		//mLog::FWARN("Load YI_FPD_Get_FPD_TYPE failed!");
		return false;
	}
	API_YI_FPD_Get_Invalid_Region = (Func_YI_FPD_Get_Invalid_Region)GetProcAddress(m_hYuyingModule, "YI_FPD_Get_Invalid_Region");
	if (nullptr == API_YI_FPD_Get_Invalid_Region)
	{
		//mLog::FWARN("Load YI_FPD_Get_Invalid_Region failed!");
		return false;
	}
	API_YI_FPD_Capture_Image = (Func_YI_FPD_Capture_Image)GetProcAddress(m_hYuyingModule, "YI_FPD_Capture_Image");
	if (nullptr == API_YI_FPD_Capture_Image)
	{
		//mLog::FWARN("Load YI_FPD_Capture_Image failed!");
		return false;
	}
	API_YI_FPD_Capture_Prepare = (Func_YI_FPD_Capture_Prepare)GetProcAddress(m_hYuyingModule, "YI_FPD_Capture_Prepare");
	if (nullptr == API_YI_FPD_Capture_Prepare)
	{
		//mLog::FWARN("Load YI_FPD_Capture_Prepare failed!");
		return false;
	}
	API_YI_Load_Gain_Tmp_File = (Func_YI_Load_Gain_Tmp_File)GetProcAddress(m_hYuyingModule, "YI_Load_Gain_Tmp_File");
	if (nullptr == API_YI_Load_Gain_Tmp_File)
	{
		//mLog::FWARN("Load YI_Load_Gain_Tmp_File failed!");
		return false;
	}
	API_YI_Load_Defect_Tmp_File = (Func_YI_Load_Defect_Tmp_File)GetProcAddress(m_hYuyingModule, "YI_Load_Defect_Tmp_File");
	if (nullptr == API_YI_Load_Defect_Tmp_File)
	{
		//mLog::FWARN("Load YI_Load_Defect_Tmp_File failed!");
		return false;
	}
	API_YI_Load_Offset_Tmp_File = (Func_YI_Load_Offset_Tmp_File)GetProcAddress(m_hYuyingModule, "YI_Load_Offset_Tmp_File");
	if (nullptr == API_YI_Load_Offset_Tmp_File)
	{
		//mLog::FWARN("Load YI_Load_Offset_Tmp_File failed!");
		return false;
	}
	API_YI_Load_AED_Offset_Tmp_File = (Func_YI_Load_AED_Offset_Tmp_File)GetProcAddress(m_hYuyingModule, "YI_Load_AED_Offset_Tmp_File");
	if (nullptr == API_YI_Load_AED_Offset_Tmp_File)
	{
		//mLog::FWARN("Load YI_Load_AED_Offset_Tmp_File failed!");
		return false;
	}
	API_YI_Set_Correct_Type = (Func_YI_Set_Correct_Type)GetProcAddress(m_hYuyingModule, "YI_Set_Correct_Type");
	if (nullptr == API_YI_Set_Correct_Type)
	{
		//mLog::FWARN("Load YI_Set_Correct_Type failed!");
		return false;
	}
	API_YI_FPD_DO_Correction = (Func_YI_FPD_DO_Correction)GetProcAddress(m_hYuyingModule, "YI_FPD_DO_Correction");
	if (nullptr == API_YI_FPD_DO_Correction)
	{
		//mLog::FWARN("Load YI_FPD_DO_Correction failed!");
		return false;
	}
	API_YI_FPD_Wifi_Re_Connect = (Func_YI_FPD_Wifi_Re_Connect)GetProcAddress(m_hYuyingModule, "YI_FPD_Wifi_Re_Connect");
	if (nullptr == API_YI_FPD_Wifi_Re_Connect)
	{
		//mLog::FWARN("Load YI_FPD_Wifi_Re_Connect failed!");
		return false;
	}
	API_YI_FPD_Wifi_Set_Work_Mode = (Func_YI_FPD_Wifi_Set_Work_Mode)GetProcAddress(m_hYuyingModule, "YI_FPD_Wifi_Set_Work_Mode");
	if (nullptr == API_YI_FPD_Wifi_Set_Work_Mode)
	{
		//mLog::FWARN("Load YI_FPD_Wifi_Set_Work_Mode failed!");
		return false;
	}
	API_YI_FPD_Wifi_Get_Work_Mode = (Func_YI_FPD_Wifi_Get_Work_Mode)GetProcAddress(m_hYuyingModule, "YI_FPD_Wifi_Get_Work_Mode");
	if (nullptr == API_YI_FPD_Wifi_Get_Work_Mode)
	{
		//mLog::FWARN("Load YI_FPD_Wifi_Get_Work_Mode failed!");
		return false;
	}
	API_YI_FPD_Wifi_Set_Name = (Func_YI_FPD_Wifi_Set_Name)GetProcAddress(m_hYuyingModule, "YI_FPD_Wifi_Set_Name");
	if (nullptr == API_YI_FPD_Wifi_Set_Name)
	{
		//mLog::FWARN("Load YI_FPD_Wifi_Set_Name failed!");
		return false;
	}
	API_YI_FPD_Wifi_Set_Power_Down = (Func_YI_FPD_Wifi_Set_Power_Down)GetProcAddress(m_hYuyingModule, "YI_FPD_Wifi_Set_Power_Down");
	if (nullptr == API_YI_FPD_Wifi_Set_Power_Down)
	{
		//mLog::FWARN("Load YI_FPD_Wifi_Set_Power_Down failed!");
		return false;
	}
	API_YI_FPD_Wifi_Set_IP_Address = (Func_YI_FPD_Wifi_Set_IP_Address)GetProcAddress(m_hYuyingModule, "YI_FPD_Wifi_Set_IP_Address");
	if (nullptr == API_YI_FPD_Wifi_Set_IP_Address)
	{
		//mLog::FWARN("Load YI_FPD_Wifi_Set_IP_Address failed!");
		return false;
	}
	API_YI_FPD_Wifi_Set_Route_Info = (Func_YI_FPD_Wifi_Set_Route_Info)GetProcAddress(m_hYuyingModule, "YI_FPD_Wifi_Set_Route_Info");
	if (nullptr == API_YI_FPD_Wifi_Set_Route_Info)
	{
		//mLog::FWARN("Load YI_FPD_Wifi_Set_Route_Info failed!");
		return false;
	}
	//mLog::FINFO("Load Yuying API over");
	return true;
}

void YuyingCtrl::FreeYuyingDLL()
{
	if (m_hYuyingModule)
	{
		FreeLibrary(m_hYuyingModule);
		m_hYuyingModule = nullptr;
		//mLog::FINFO(" Free Yuying DLL");
	}
}

bool YuyingCtrl::DriverEntry(FPDDeviceYuying* pDrvDPC, ResDataObject& Configuration)
{
	//mLog::FINFO("--Func-- DriverEntry {$}", pDrvDPC);

	map<FPDDeviceYuying*, int>::iterator DPCsIter = m_pDPC2PanelID->find(pDrvDPC);
	if (DPCsIter != m_pDPC2PanelID->end())
	{
		//mLog::FERROR("This DPC already exist");
		return false;
	}

	CPanelStatus* p = new CPanelStatus();
	m_pStPanelStatus[m_nPanelCount] = p;

	m_pDPC2PanelID->insert(pair<FPDDeviceYuying*, int>(pDrvDPC, m_nPanelCount));
	m_pPanelID2DPC->insert(pair<int, FPDDeviceYuying*>(m_nPanelCount, pDrvDPC));
	m_nPanelCount++;
	m_ModeConfig = Configuration; //记录配置  --目前只有一个平板，多板时应该分别存储
	//mLog::FINFO("Config: {$}", m_ModeConfig.encode());
	return true;
}

void YuyingCtrl::ConfFeedback(int nEventID, int nDetectorID, const char* pszMsg, int nParam1, float fParam2, int nPtrParamLen, void* pParam)
{
	if (-1 == nDetectorID)
	{
		nDetectorID = m_nDetectorIndex;
	}
	((*m_pPanelID2DPC)[nDetectorID])->OnFPDCallback(nDetectorID,
		nEventID, EVT_LEVEL_CONFIGURATION, pszMsg, nParam1, fParam2, nPtrParamLen, pParam);
}

void YuyingCtrl::InfoFeedback(int nEventID, int nDetectorID, int nParam1, float fParam2, const char* pszMsg, int nPtrParamLen, void* pParam)
{
	if (-1 == nDetectorID)
	{
		nDetectorID = m_nDetectorIndex;
	}
	((*m_pPanelID2DPC)[nDetectorID])->OnFPDCallback(nDetectorID,
		nEventID, EVT_LEVEL_INFORMATOION, pszMsg, nParam1, fParam2, nPtrParamLen, pParam);
}

void YuyingCtrl::StatusFeedback(int nEventID, int nParam1, const char* pszMsg, int nDetectorID, float fParam2, int nPtrParamLen, void* pParam)
{
	if (-1 == nDetectorID)
	{
		nDetectorID = m_nDetectorIndex;
	}
	((*m_pPanelID2DPC)[nDetectorID])->OnFPDCallback(nDetectorID,
		nEventID, EVT_LEVEL_STATUS, pszMsg, nParam1, fParam2, nPtrParamLen, pParam);
}

void YuyingCtrl::DataFeedback(int nEventID, void* pParam, int nParam1, float fParam2, const char* pszMsg, int nPtrParamLen, int nDetectorID)
{
	if (-1 == nDetectorID)
	{
		nDetectorID = m_nDetectorIndex;
	}
	((*m_pPanelID2DPC)[nDetectorID])->OnFPDCallback(nDetectorID,
		nEventID, EVT_LEVEL_DATA, pszMsg, nParam1, fParam2, nPtrParamLen, pParam);
}

void YuyingCtrl::WarnFeedback(int nEventID, const char* pszMsg, int nParam1, float fParam2, int nPtrParamLen, void* pParam, int nDetectorID)
{
	if (-1 == nDetectorID)
	{
		nDetectorID = m_nDetectorIndex;
	}
	((*m_pPanelID2DPC)[nDetectorID])->OnFPDCallback(nDetectorID,
		nEventID, EVT_LEVEL_WARNING, pszMsg, nParam1, fParam2, nPtrParamLen, pParam);
}

void YuyingCtrl::ErrorFeedback(int nEventID, const char* pszMsg, int nDetectorID, int nParam1, float fParam2, int nPtrParamLen, void* pParam)
{
	if (-1 == nDetectorID)
	{
		nDetectorID = m_nDetectorIndex;
	}
	((*m_pPanelID2DPC)[nDetectorID])->OnFPDCallback(nDetectorID,
		nEventID, EVT_LEVEL_ERROR, pszMsg, nParam1, fParam2, nPtrParamLen, pParam);
}

/********************************************************************/
/****************************将文件删除******************************/
/********************************************************************/
bool YuyingCtrl::DeleteOneFolder(string strSourceFolder)
{
	//mLog::FINFO("Delete {$}", strSourceFolder.c_str());

	if (!PathFileExists(strSourceFolder.c_str()))
	{
		//mLog::FINFO("SourceFolder don't exist");
		return false;
	}

	char pFolderSource[1024] = { 0 };
	memset(pFolderSource, 0x00, 1024);
	strcpy(pFolderSource, strSourceFolder.c_str());   //第一个文件        

	SHFILEOPSTRUCT sfo;
	memset(&sfo, 0, sizeof(SHFILEOPSTRUCT));
	sfo.hwnd = NULL;
	sfo.wFunc = FO_DELETE;//FO_MOVE;            
	sfo.pFrom = pFolderSource;
	sfo.fFlags = FOF_SILENT | FOF_NOCONFIRMATION;
	SHFileOperation(&sfo);
	//mLog::FINFO("Delete File over");

	return true;
}

//将strSrcPath文件拷贝到strDstPath目录
bool YuyingCtrl::CopyFile2Folder(string strSrcPath, string strDstPath)
{
	//MSDN: This string must be double-null terminated
	strSrcPath += '\0';
	strDstPath += '\0';
	//上面两行代码非常重要，直接影响下面SHFileOperation的稳定性
	//mLog::FINFO("Copy {$} to {$}", strSrcPath.c_str(), strDstPath.c_str());

	if (!PathFileExists(strSrcPath.c_str()))
	{
		//mLog::FINFO("SourceFolder don't exist");
		return false;
	}

	if (!PathFileExists(strDstPath.c_str()))
	{
		//mLog::FINFO("DestFolder don't exist");
		return false;
	}

	SHFILEOPSTRUCT sfo;
	sfo.hwnd = NULL;
	sfo.wFunc = FO_COPY;//FO_MOVE;            
	sfo.pFrom = strSrcPath.c_str();
	sfo.pTo = strDstPath.c_str();
	sfo.fFlags = FOF_SILENT | FOF_NOCONFIRMATION | FOF_ALLOWUNDO;
	//FOF_ALLOWUNDO：保存UNDO信息，以便在回收站中恢复文件； 
	//FOF_NOCONFIRMATION：在出现目标文件已存在的时候，如果不设置此项，则它会出现确认是否覆盖的对话框，设置此项则自动确认，进行覆盖，不出现对话框。
	int nRet = SHFileOperation(&sfo);

	//mLog::FINFO("Copy File to Folder over, {$}", nRet);
	return true;
}

bool YuyingCtrl::ActivePanel(nsDPC::FPDDeviceYuying* pDrvDPC, bool bActive)
{
	//mLog::FINFO("ActivePanel start: {$}, DetectorIndex {$}", pDrvDPC, m_nDetectorIndex);
	map<nsDPC::FPDDeviceYuying*, int>::iterator DPCsIter = m_pDPC2PanelID->find(pDrvDPC);
	if (DPCsIter != m_pDPC2PanelID->end())
	{
		if (m_nDetectorIndex != DPCsIter->second)
		{
			//mLog::FINFO("DetectorIndex {$} != DPCsIter->second {$}", m_nDetectorIndex, DPCsIter->second);
			m_nDetectorIndex = DPCsIter->second;
			m_pCurrentDPC = pDrvDPC;
			m_nCurrentMode = -1;
			m_ModeConfig.clear();
			m_ModeConfig = m_ObjFPDsInfo[m_nDetectorIndex];
			//mLog::FINFO("ActivePanel over: {$}, DetectorIndex {$}", pDrvDPC, m_nDetectorIndex);
		}
		else
		{
			//mLog::FINFO("DetectorIndex {$} == DPCsIter->second {$}", m_nDetectorIndex, DPCsIter->second);
		}
	}
	else
	{
		//mLog::FWARN("Not find DPC in group");
		return false;
	}
	return true;
}

bool YuyingCtrl::EnterExam(APP_STATUS eStatus)
{
	string strLog = "";
	switch (eStatus)
	{
		case APP_STATUS_IDLE:
			strLog = "APP_STATUS_IDLE";
			break;
		case APP_STATUS_WORK_BEGIN:
			strLog = "APP_STATUS_WORK_BEGIN";
			m_bInCalibrating = false;
			break;
		case APP_STATUS_WORK_END:
			strLog = "APP_STATUS_WORK_END";
			break;
		case APP_STATUS_DETSHARE_BEGIN:
			strLog = "APP_STATUS_DETSHARE_BEGIN";
			break;
		case APP_STATUS_DETSHAR_END:
			strLog = "APP_STATUS_DETSHAR_END";
			break;
		case APP_STATUS_CAL_BEGIN:
			strLog = "APP_STATUS_CAL_BEGIN";
			break;
		case APP_STATUS_CAL_END:
			strLog = "APP_STATUS_CAL_END";
			m_bInCalibrating = false;
			break;
		default:
			break;
	}
	//mLog::FINFO("Enter exam: {$}", strLog.c_str());
	m_eAppStatus = eStatus;
	return true;
}

/***
** 说明：连接
** 加载SDK，初始化SDK，连接探测器等初始化操作
** 参数：strWorkPath，初始化SDK必须的conf路径
***/
bool YuyingCtrl::Connect(FPDDeviceYuying* pDrvDPC, string strWorkPath)
{
	//mLog::FINFO("--Func-- Connect");

	if ((*m_pDPC2PanelID)[pDrvDPC] != m_nDetectorIndex)
	{
		//mLog::FWARN("Not current DPC, return true");
		return true;
	}

	StartInitFPDThread();

	//mLog::FINFO("=== Connect detector OK ===");
	return true;
}

/***
** 说明：退出
** 释放SDK
***/
bool YuyingCtrl::DisConnect(nsDPC::FPDDeviceYuying* pDrvDPC)
{
	if ((*m_pDPC2PanelID)[pDrvDPC] != m_nDetectorIndex)
	{
		//mLog::FWARN("Not current DPC, return");
		return true;
	}

	//mLog::FINFO("--Func-- DisConnect");
	//mLog::FINFO("DicConnect DoNothing");
	//mLog::FINFO("DisConnect Over");
	return true;
}



/***
** 说明：设置当前的曝光模式
** 参数：nLogicMode，从配置文件读取，与SDK配置application mode对应
***/
bool YuyingCtrl::SelectExamMode(int nLogicMode, nsDPC::FPDDeviceYuying* pDrvDPC)
{
	//mLog::FINFO("YuyingCtrl::SelectExamMode start");
	if ((*m_pDPC2PanelID)[pDrvDPC] != m_nDetectorIndex)
	{
		//mLog::FWARN("Not current DPC {$}, {$} != {$} ,return", pDrvDPC, (*m_pDPC2PanelID)[pDrvDPC], m_nDetectorIndex);
		return false;
	}

	if (m_stDeviceIndex[m_nDetectorIndex].bConnectStatus == false)
	{
		//mLog::FERROR("Current detector {$} is not connect, return\n", m_nDetectorIndex);
		return false;
	}

	//mLog::FINFO("SelectExamMode({$})", nLogicMode);

	if (m_nCurrentMode == nLogicMode) //同样appmode下没必要再次走下面的流程
	{
		//mLog::FINFO("Same appmode, return true");
		return true;
	}
	m_nCurrentMode = nLogicMode;

	try
	{
		m_nRawImgHeight = m_stDeviceIndex[m_nDetectorIndex].nRawHeight;
		m_nRawImgWidth = m_stDeviceIndex[m_nDetectorIndex].nRawWidth;
		m_nImageWidth = m_stDeviceIndex[m_nDetectorIndex].nFullImageWidth;
		m_nImageHeight = m_stDeviceIndex[m_nDetectorIndex].nFullImageHeight;
		m_nLeftOffset = m_stDeviceIndex[m_nDetectorIndex].nImageLeftOffset;
		m_nTopOffset = m_stDeviceIndex[m_nDetectorIndex].nImageTopOffset;
		m_nRightOffset = m_stDeviceIndex[m_nDetectorIndex].nImageRightOffset;
		m_nBottomOffset = m_stDeviceIndex[m_nDetectorIndex].nImageBottomOffset;
		m_nImgBits = m_stDeviceIndex[m_nDetectorIndex].nImageBits;
		m_nPixelPitch = m_stDeviceIndex[m_nDetectorIndex].nPixelSpace;
		m_nSaveRaw = m_stDeviceIndex[m_nDetectorIndex].nSaveRaw;

		//mLog::FINFO("Raw({$}*{$}), Effective({$}*{$}), Offset({$} {$} {$} {$}), Bits({$}), PixelPitch({$}), SaveRaw({$})",
			m_nRawImgWidth, m_nRawImgHeight, m_nImageWidth, m_nImageHeight, m_nTopOffset, m_nBottomOffset, m_nLeftOffset, m_nRightOffset,
			m_nImgBits, m_nPixelPitch, m_nSaveRaw);

		string strCoef = (string)m_ModeConfig["Sensitivity"];
		//mLog::FINFO("Sensitivity: {$}", strCoef.c_str());
		m_nPreviewWidth = m_stDeviceIndex[m_nDetectorIndex].nPreviewWidth;
		m_nPreviewHeight = m_stDeviceIndex[m_nDetectorIndex].nPreviewHeight;
		m_bPreviewEnable = m_stDeviceIndex[m_nDetectorIndex].bPreviewEnable;
		//mLog::FINFO("Preview size(W*H {$}*{$}), PreviewEnable({$})", m_nPreviewWidth, m_nPreviewHeight, m_bPreviewEnable);
	}
	catch (ResDataObjectExption& exp)
	{
		//mLog::FERROR("Get config failed: {$}", exp.what());
	}
	
	if (m_pImgBuffer)
	{
		delete[] m_pImgBuffer;
		m_pImgBuffer = nullptr;
	}
	m_pImgBuffer = new WORD[m_nImageHeight * m_nImageWidth];

	ConfFeedback(EVT_CONF_RAW_WIDTH, m_nDetectorIndex, "", m_nImageWidth);
	ConfFeedback(EVT_CONF_RAW_HIGHT, m_nDetectorIndex, "", m_nImageHeight);
	ConfFeedback(EVT_CONF_RAW_BITS, m_nDetectorIndex, "", m_nImgBits);
	ConfFeedback(EVT_CONF_PIXELSPACE, m_nDetectorIndex, "", m_nPixelPitch);
	ConfFeedback(EVT_CONF_PREVIEW_WIDTH, m_nDetectorIndex, "", m_nPreviewWidth);
	ConfFeedback(EVT_CONF_PREVIEW_HIGHT, m_nDetectorIndex, "", m_nPreviewHeight);

	//mLog::FINFO("selectExamMode {$} over \n", m_nCurrentMode);

	return true;
}

bool YuyingCtrl::StartOffsetThread()
{
	if (m_pOffsetThread == nullptr)
	{
		DWORD m_NotifyThreadID;
		m_pOffsetThread = CreateThread(0, 0, OffsetThread, this, 0, &m_NotifyThreadID);
		if (m_pOffsetThread == nullptr)
		{
			//mLog::FWARN("Start Offset Thread Failed");
			return false;
		}
	}
	return true;
}

DWORD YuyingCtrl::OffsetThread(LPVOID pParam)
{
	YuyingCtrl* pCurPanel = (YuyingCtrl*)pParam;
	if (pCurPanel == nullptr)
	{
		return false;
	}

	//mLog::FINFO("OffsetThread");
	pCurPanel->StatusFeedback(EVT_STATUS_PANEL, PANEL_OFFSET_FINISH);
	pCurPanel->m_pOffsetThread = nullptr;
	return true;
}

/********************************************************************/
//功能：Yuying没有曝光窗口关闭的消息，启动线程，等待500ms曝光窗口过后，模拟发送曝光窗口关闭的消息给HW层
/********************************************************************/
bool YuyingCtrl::StartXWindowOffThread()
{
	if (m_pXWindowoffThread == nullptr)
	{
		DWORD m_NotifyThreadID;
		m_pXWindowoffThread = CreateThread(0, 0, XWindowOffThread, this, 0, &m_NotifyThreadID);
		if (m_pXWindowoffThread == nullptr)
		{
			//mLog::FWARN("Start Inner Exp Thread Failed");
			return false;
		}
	}
	return true;
}

/********************************************************************/
//功能：Yuying没有曝光窗口关闭的消息，启动线程，等待500ms曝光窗口过后，模拟发送曝光窗口关闭的消息给HW层
/********************************************************************/
DWORD YuyingCtrl::XWindowOffThread(LPVOID pParam)
{
	YuyingCtrl* pCurPanel = (YuyingCtrl*)pParam;
	if (pCurPanel == nullptr)
	{
		return false;
	}
	DWORD dwTimer = pCurPanel->m_stDeviceIndex[pCurPanel->m_nDetectorIndex].nXWindow;
	DWORD dwResult = WaitForSingleObject(pCurPanel->m_hWindowOffEvent, dwTimer);
	//mLog::FINFO("Simulate XWINDOW_OFF");
	pCurPanel->StatusFeedback(EVT_STATUS_PANEL, PANEL_XWINDOW_OFF);
	pCurPanel->m_pXWindowoffThread = nullptr;
	return true;
}

/***
** 说明：曝光前的准备流程
***/
RET_STATUS YuyingCtrl::PrepareAcquisition(nsDPC::FPDDeviceYuying* pDrvDPC)
{
	if ((*m_pDPC2PanelID)[pDrvDPC] != m_nDetectorIndex)
	{
		//mLog::FWARN("Not current DPC, return");
		return RET_STATUS::RET_FAILED;
	}

	if (m_stDeviceIndex[m_nDetectorIndex].bConnectStatus == false)
	{
		//mLog::FINFO("Current detector is not connect, return");
		return RET_STATUS::RET_FAILED;
	}

	int nTempTriggerMode = m_stDeviceIndex[m_nDetectorIndex].nSyncMode;
	if (ModeType::Idle == nTempTriggerMode)
	{
		//mLog::FINFO("Idle");
	}
	else if (ModeType::Software_Mode == nTempTriggerMode) //软同步
	{
		//mLog::FINFO("Softerware mode");
	}
	else if (ModeType::AED_Offset_Mode == nTempTriggerMode) //AED_Offset
	{
		//mLog::FINFO("AED offset mode");
	}
	else if (ModeType::AED_Mode == nTempTriggerMode) //Free同步
	{
		//mLog::FINFO("AED mode");
	}
	else if (ModeType::Outer_Mode == nTempTriggerMode) //外同步
	{
		//mLog::FINFO("Outer mode");
	}
	else if (ModeType::Freerun_Mode == nTempTriggerMode) //Freerun
	{
		//mLog::FINFO("Freerun mode");
	}
	else
	{
		//mLog::FERROR("The detector get undefined sync mode");
	}

	m_bAEDWorkFlag = false;

	return RET_STATUS::RET_SUCCEED;
}

RET_STATUS YuyingCtrl::StartAcquisition(nsDPC::FPDDeviceYuying* pDrvDPC)
{
	if ((*m_pDPC2PanelID)[pDrvDPC] != m_nDetectorIndex)
	{
		//mLog::FWARN("Not current DPC, return");
		return RET_STATUS::RET_FAILED;
	}

	RET_STATUS Ret = RET_STATUS::RET_FAILED;

	if (!m_stDeviceIndex[m_nDetectorIndex].bConnectStatus)
	{
		//mLog::FWARN("Detector not in connection when start acq, return failed");

		return RET_STATUS::RET_FAILED;
	}

	StatusFeedback(EVT_STATUS_ACQUISITION, PANEL_EVENT_START);

	m_bInExposure = true;

	int nTempTriggerMode = m_stDeviceIndex[m_nDetectorIndex].nSyncMode;
	if (ModeType::Idle == nTempTriggerMode)
	{
		//mLog::FINFO("Idle");
	}
	else if (ModeType::Software_Mode == nTempTriggerMode) //软同步
	{
		//mLog::FINFO("Softerware mode");
		int nRet = API_YI_FPD_Capture_Image(m_vecDetectorID[m_nDetectorIndex].c_str(), 1);
		if (TestError(m_nDetectorID, nRet, "Capture_Image"))
		{
			//mLog::FERROR("Capture image failed");
		}
	}
	else if (ModeType::AED_Offset_Mode == nTempTriggerMode) //AED_Offset
	{
		//mLog::FINFO("AED offset mode");
	}
	else if (ModeType::AED_Mode == nTempTriggerMode) //Free同步
	{
		//mLog::FINFO("AED mode");
	}
	else if (ModeType::Outer_Mode == nTempTriggerMode) //外同步
	{
		//mLog::FINFO("Outer mode");
	}
	else if (ModeType::Freerun_Mode == nTempTriggerMode) //Freerun
	{
		//mLog::FINFO("Freerun mode");
	}
	else
	{
		//mLog::FERROR("The detector get undefined sync mode");
	}

	StatusFeedback(EVT_STATUS_ACQUISITION, PANEL_EVENT_END_OK);
	//mLog::FINFO("ACQ==============================");
	StatusFeedback(EVT_STATUS_PANEL, PANEL_START_ACQ);
	if (m_stDeviceIndex[m_nDetectorIndex].nSyncMode == ModeType::AED_Mode)
	{
		m_bAEDWorkFlag = true;
	}

	return RET_STATUS::RET_SUCCEED;
}

RET_STATUS YuyingCtrl::StopAcquisition(nsDPC::FPDDeviceYuying* pDrvDPC)
{
	if ((*m_pDPC2PanelID)[pDrvDPC] != m_nDetectorIndex)
	{
		//mLog::FWARN("Not current DPC, return");
		return RET_STATUS::RET_FAILED;
	}
	return RET_STATUS::RET_SUCCEED;
}

bool YuyingCtrl::GetYuyingPanelCalibItem()
{
	m_listCalibItem.clear();

	try {
		int nModeCount = (int)m_ModeConfig["ModeTable"].GetKeyCount("DetectorMode");
		for (int i = 0; i < nModeCount; i++)
		{
			int nCalibModeCount = (int)m_ModeConfig["ModeTable"][i]["CalibConfig"].GetKeyCount("NodeInfo");
			for (int j = 0; j < nCalibModeCount; j++)
			{
				RefrenceCal stRefCal;
				stRefCal.nAvgNum = (int)m_ModeConfig["ModeTable"][i]["CalibConfig"][j]["ImgCount"];
				stRefCal.nReferDose = (int)m_ModeConfig["ModeTable"][i]["CalibConfig"][j]["Dose"];
				m_listCalibItem.push_back(stRefCal);
			}
		}
	}
	catch (...)
	{
		return false;
	}
	return true;
}

bool YuyingCtrl::InitCalibration()
{
	m_nDefectExpTimes = 0;
	m_nDefectTotalTimes = 0;
	m_nGainExpTimes = 0;
	//mLog::FINFO("InitCalibration Current Active FD Index:{$}", m_nDetectorIndex);
	if (m_nPanelCount < 0)
	{
		return false;
	}
	string strMode = "STE";
	m_bInCalibrating = true;
	bool ret = GetYuyingPanelCalibItem();

	if (!ret)
	{
		//mLog::FERROR("GetPanelCalibItem failed\n");
		return false;
	}

	list<RefrenceCal>::iterator iter;
	for (iter = m_listCalibItem.begin(); iter != m_listCalibItem.end(); iter++)
	{
		//mLog::FINFO("Calibration dose:{$},Number:{$}", iter->nReferDose, iter->nAvgNum);
	}

	m_iterCalibDose = m_listCalibItem.begin();
	m_nDoseParam = m_iterCalibDose->nReferDose;
	DataFeedback(EVT_DATA_DOSEPARAM, NULL, m_nDoseParam);

	//mLog::FINFO("First Calibration dose:{$},Number:{$},m_nDoseParam = {$}", m_iterCalibDose->nReferDose, m_iterCalibDose->nAvgNum, m_nDoseParam);
	m_nGainTotalFrames = 0;

	return true;
}

/***
** 说明：激活校正
** 增益校正（探测器采用post-offset，暗场校正基本没用了）时拿到dose回调，算作执行完毕
***/
RET_STATUS YuyingCtrl::ActiveCalibration(CCOS_CALIBRATION_TYPE Type, nsDPC::FPDDeviceYuying* pDrvDPC)
{
	if ((*m_pDPC2PanelID)[pDrvDPC] != m_nDetectorIndex)
	{
		//mLog::FWARN("Not current DPC, return");
		return RET_STATUS::RET_FAILED;
	}

	RET_STATUS Ret = RET_STATUS::RET_SUCCEED;
	int nTemp = (int)m_ModeConfig["Attached"];
	if (nTemp == 0)
	{
		//mLog::FWARN("Current detector({$}) is not attached, return failed", m_nDetectorIndex);
		return RET_STATUS::RET_FAILED;
	}
	if (CCOS_CALIBRATION_TYPE_DARK == Type)
	{
		//mLog::FINFO("ActiveDarkCalibration");
	}
	else if (CCOS_CALIBRATION_TYPE_XRAY == Type)
	{
		//mLog::FINFO("ActiveXrayCalibration");
		StatusFeedback(EVT_STATUS_CALIBRATIOIN, PANEL_EVENT_START);

		if (!InitCalibration())
		{
			StatusFeedback(EVT_STATUS_CALIBRATIOIN, PANEL_EVENT_END_ERROR);
			return RET_STATUS::RET_FAILED;
		}
	}
	else
	{
		//mLog::FERROR("Active not supported calibration({$}), return! \n", (int)Type);
		Ret = RET_STATUS::RET_NOSUPPORT;
		return Ret;
	}
	m_eCaliType = Type;

	return Ret;
}

/***
** 说明：开始校正（状态机FrameStart）
** Salmon项目只有普通rad模式，所以本接口基本没用
***/
RET_STATUS YuyingCtrl::StartCalibration(nsDPC::FPDDeviceYuying* pDrvDPC)
{
	if ((*m_pDPC2PanelID)[pDrvDPC] != m_nDetectorIndex)
	{
		//mLog::FWARN("Not current DPC, return");
		return RET_STATUS::RET_FAILED;
	}

	RET_STATUS Ret = RET_STATUS::RET_FAILED;
	int nTemp = (int)m_ModeConfig["Attached"];
	if (nTemp == 0)
	{
		//mLog::FWARN("Current detector({$}) is not attached, return failed", m_nDetectorIndex);
		return Ret;
	}

	if (CCOS_CALIBRATION_TYPE_DARK == m_eCaliType)
	{
		//mLog::FINFO("StartDarkCalibration \n");
		StartOffsetThread();
		Ret = RET_STATUS::RET_SUCCEED;
	}
	else
	{
		//mLog::FINFO("StartXrayCalibration \n");
		Ret = RET_STATUS::RET_SUCCEED;
	}
	return Ret;
}

bool YuyingCtrl::ConfirmCalibration()
{
	//mLog::FINFO("Confirm Calibration");
	return true;
}

bool YuyingCtrl::AcceptCalibration()
{
	if ((PANEL_GAIN_CAL == m_nCalibStatus) && (m_nGainExpTimes >= m_nGainTotalFrames))
	{
		//mLog::FINFO("Gain exposure over");
		if (CreateCalibrationFile())
		{
			m_iterCalibDose++;
			m_nDoseParam = m_iterCalibDose->nReferDose;
			//mLog::FINFO("Next Gain Calibration dose:{$},Number:{$}", m_iterCalibDose->nReferDose, m_iterCalibDose->nAvgNum);
		}
		else
		{
			StatusFeedback(EVT_STATUS_SINGLEEXP, PANEL_EVENT_END_ERROR);
		}
	}
	else if (PANEL_DEFECT_CAL == m_nCalibStatus)
	{
		int nAvgNum = m_iterCalibDose->nAvgNum;
		if (m_nDefectExpTimes >= nAvgNum)
		{
			m_nDefectExpTimes = 0;
			m_iterCalibDose++;
			m_nDoseParam = m_iterCalibDose->nReferDose;
			//mLog::FINFO("Next Defect Calibration dose:{$},Number:{$}", m_iterCalibDose->nReferDose, m_iterCalibDose->nAvgNum);
		}
		if (m_nDefectTotalTimes >= m_nDefectTotalFrames)
		{
			//mLog::FINFO("Defect exposure over");
			StatusFeedback(EVT_STATUS_PREPARE_EDNCALIBRATION, 0);
			if (CreateCalibrationFile())
			{
				StatusFeedback(EVT_STATUS_CALIBRATIOIN, PANEL_EVENT_END_OK);
			}
			else
			{
				StatusFeedback(EVT_STATUS_SINGLEEXP, PANEL_EVENT_END_ERROR);
			}

			return true;
		}
	}
	DataFeedback(EVT_DATA_DOSEPARAM, NULL, m_nDoseParam);
	return true;
}

bool YuyingCtrl::CreateCalibrationFile()
{
	return true;
}

bool YuyingCtrl::RejectCalibration()
{
	//mLog::FINFO("Reject Calibration");
	return true;
}

/***
** 说明：终止校正
***/
RET_STATUS YuyingCtrl::AbortCalibration(nsDPC::FPDDeviceYuying* pDrvDPC)
{
	_AutoLocker scLocker(this);

	if (!m_bInCalibrating)
	{
		//mLog::FWARN("Not in calibration status,omit it.");
		return RET_STATUS::RET_SUCCEED;
	}

	if ((*m_pDPC2PanelID)[pDrvDPC] != m_nDetectorIndex)
	{
		//mLog::FWARN("Not current DPC,return");
		return RET_STATUS::RET_FAILED;
	}

	//mLog::FINFO("AbortCalibration");
	m_eCaliType = CCOS_CALIBRATION_TYPE_NONE; //恢复初值
	RET_STATUS Ret = RET_STATUS::RET_FAILED;

	if (m_nPanelCount < 0)
	{
		//mLog::FINFO("No active detector");
		return Ret;
	}

	if (m_bInCalibrating)
	{
		SetMarsCorrection(m_nDetectorIndex);
	}
	else
	{
		//mLog::FINFO("Omit Abort Calibration");
	}

	Ret = RET_STATUS::RET_SUCCEED;

	return Ret;
}

/***
** 说明：准备校正（状态机FramePrep）
** 曝光使能过程，使探测器开窗
***/
RET_STATUS YuyingCtrl::PrepareCalibration(nsDPC::FPDDeviceYuying* pDrvDPC)
{
	if ((*m_pDPC2PanelID)[pDrvDPC] != m_nDetectorIndex)
	{
		//mLog::FWARN("Not current DPC, return");
		return RET_STATUS::RET_FAILED;
	}

	RET_STATUS Ret = RET_STATUS::RET_FAILED;
	int nTemp = (int)m_ModeConfig["Attached"];
	if (nTemp == 0)
	{
		//mLog::FWARN("Current detector({$}) is not attached, return failed", m_nDetectorIndex);
		return Ret;
	}

	Ret = RET_STATUS::RET_SUCCEED;

	//mLog::FDEBUG("PrepareCalibration Over");
	return Ret;
}

/***
** 说明：结束校正
** DPC处理完校正报告后调用，此处上传map、报告等文件
***/
RET_STATUS YuyingCtrl::CompleteCalibration(nsDPC::FPDDeviceYuying* pDrvDPC)
{
	if ((*m_pDPC2PanelID)[pDrvDPC] != m_nDetectorIndex)
	{
		//mLog::FWARN("Not current DPC, return");
		return RET_STATUS::RET_FAILED;
	}

	SetEvent(m_hEndCalibEvent);

	//mLog::FINFO("CompleteCalibration");
	return RET_STATUS::RET_SUCCEED;
}

void YuyingCtrl::OnEndCalibraion()
{
	//mLog::FINFO("OnEndCalibraion start");
	m_bInCalibrating = false;
	bool bLTE = false;
	bool bRet = true;

	SetMarsCorrection(m_nDetectorIndex);

	string szTemp;
	szTemp = m_stDeviceIndex[m_nDetectorIndex].strCalibrationDate;
	if (bRet)
	{
		StatusFeedback(EVT_STATUS_SAVECALIB, PANEL_EVENT_END);
	}
	else
	{
		StatusFeedback(EVT_STATUS_SAVECALIB, PANEL_EVENT_END_ERROR);
	}

	//mLog::FINFO("Calibration completed!");

	return;
}

bool YuyingCtrl::RecoverLastImage()
{
	//mLog::FINFO("Recover Last Image");
	return RecoverImage();
}

bool YuyingCtrl::RecoverLastImageAuto()
{
	//mLog::FINFO("Recover Last Image Auto");
	return true;
}

/********************************************************************/
//功能：对图像镜像
/********************************************************************/
bool YuyingCtrl::FlipX(WORD* pData, int nWidth, int nHeight)
{
	int j = 0;
	int i = 0;
	//mLog::FINFO("Flip Image Width:{$},Height:{$}", nWidth, nHeight);
	WORD temp;
	//修改翻转的判断，之前的代码会导致中央区域多翻转一个像素
	for (i = 0; i < nHeight; i++)
	{
		for (j = 0; j < nWidth / 2; j++)
		{
			temp = pData[i * nWidth + j];
			pData[i * nWidth + j] = pData[(i + 1) * nWidth - j - 1];
			pData[(i + 1) * nWidth - j - 1] = temp;
		}
	}
	//mLog::FINFO("Flip Image Over");
	return true;
}

/********************************************************************/
//功能：对SDK输出的图像，先旋转90度，再做镜像
/********************************************************************/
bool YuyingCtrl::FlipXRotate90(WORD* pData, int nWidth, int nHeight)
{
	//mLog::FINFO("Rotate 270 angle");
	WORD* ptempData = new WORD[nWidth * nHeight];

	memcpy(ptempData, pData, nWidth * nHeight * sizeof(WORD));

	for (int i = 0; i < nWidth; i++)
		for (int j = 0; j < nHeight; j++)
			pData[i * nWidth + j] = ptempData[j * nWidth + (nWidth - 1 - i)];

	delete[] ptempData;
	ptempData = nullptr;

	FlipX(pData, nWidth, nHeight);

	return true;
}

//获取电池电量
bool YuyingCtrl::CheckBattery(int nDetectorID)
{
	if (!m_stDeviceIndex[nDetectorID].bBatteryEnable)
	{
		//mLog::FINFO("Battery disable");
		return true;
	}
	return true;
}

//读取探测器WIFI
bool  YuyingCtrl::ReadWifiStatus(int nDetectorID)
{
	int nPanelID = nDetectorID + 1;
	if (!m_stDeviceIndex[nDetectorID].bWireless)
	{
		return false;
	}
	//mLog::FINFO("Read Wifi");
	//mLog::FWARN("Read Wifi Failed");

	return false;
}

bool YuyingCtrl::CheckWiFi(int nDetectorID)
{
	if (!m_stDeviceIndex[nDetectorID].bWifiEnable)
	{
		//mLog::FINFO("Wifi disable");
		return true;
	}
	
	return true;
}

bool YuyingCtrl::CheckTemperature(int nDetectorID)
{
	int nPanelID = nDetectorID + 1;
	if (!m_stDeviceIndex[nDetectorID].bTemperatureEnable)
	{
		//mLog::FINFO("Temperature disable");
		return true;
	}
	float fTemperature1 = 0.0f;

	return true;
}

// 探测器是板内校正
// 设置探测器端校正参数，加载校正文件
bool YuyingCtrl::SetMarsCorrection(int nDetectorID)
{
	//mLog::FINFO("Set Mars Correction Option");
	return true;
}

//设置探测器的工作模式
bool YuyingCtrl::SetDetectorWorkMode(int nDetectorID, const char* szFPD, int nWorkMode)
{
	//mLog::FINFO("Set detector({$})({$}) work mode: {$}", nDetectorID, szFPD, nWorkMode);

	if (ModeType::Idle == nWorkMode)
	{
		//mLog::FINFO("Set workmode Idle");
	}
	else if (ModeType::Software_Mode == nWorkMode)
	{
		//mLog::FINFO("Set workmode software");
	}
	else if (ModeType::AED_Offset_Mode == nWorkMode)
	{
		//mLog::FINFO("Set workmode AED offset");
	}
	else if (ModeType::AED_Mode == nWorkMode) //AED触发
	{
		//mLog::FINFO("Set workmode AED");
	}
	else if (ModeType::Outer_Mode == nWorkMode) //硬同步(直连或者同步盒)
	{
		//mLog::FINFO("Set Hardware outer");
	}

	int nRet = API_YI_FPD_Set_Work_Mode(szFPD, (ModeType)nWorkMode);
	if (TestError(nDetectorID, nRet, "API_YI_FPD_Set_Work_Mode"))
	{
		//mLog::FERROR("Set work mode failed!!!");
		return false;
	}
	else
	{
		//mLog::FINFO("Set work mode success");
	}

	//mLog::FINFO("SetDetectorWorkMode over");
	return true;
}

//加载校正
bool CCOS::Dev::Detail::Detector::YuyingCtrl::FPDLoadCorrectFiles(int nDetectorID, const char* szDetectorID)
{
	//mLog::FINFO("FPDLoadCorrectFiles");
	int nRet = 0;
	std::string strGainPath = m_stDeviceIndex[m_nDetectorIndex].strGainPath;
	std::string strDefectPath = m_stDeviceIndex[m_nDetectorIndex].strDefectPath;

	if (m_stDeviceIndex[m_nDetectorIndex].bGainDefectEnable)
	{
		nRet = API_YI_Load_Gain_Tmp_File(szDetectorID, strGainPath.c_str()); //加载Gain模板
		if (TestError(nDetectorID, nRet, "Load_Gain"))
		{
			//mLog::FERROR("Load gain template failed!");
		}
		else
		{
			//mLog::FINFO("Load gain tempplate success");
		}

		nRet = API_YI_Load_Defect_Tmp_File(szDetectorID, strDefectPath.c_str());
		if (TestError(nDetectorID, nRet, "Load_Defect"))
		{
			//mLog::FERROR("Load defect template failed!");
		}
		else
		{
			//mLog::FINFO("Load defect template success");
		}

		int nCorrectType = Do_Gain | Do_Defect;
		nRet = API_YI_Set_Correct_Type(szDetectorID, nCorrectType);
		if (TestError(nDetectorID, nRet, "Set_Correction"))
		{
			//mLog::FERROR("Set correction failed!");
		}
		else
		{
			//mLog::FINFO("Set correction success");
		}
	}
	else
	{
		//mLog::FINFO("");
	}
	
	//设置探测器做Offset校正
	nRet = API_YI_FPD_Subtract_Offset(szDetectorID, true);
	if (TestError(nDetectorID, nRet, "Set_Offset"))
	{
		//mLog::FERROR("Set offset failed!");
	}
	else
	{
		//mLog::FINFO("Set offset success");
	}

	//mLog::FINFO("FPDLoadCorrectFiles over");
	return true;
}

//-----------------------------------------------------------------------------
// 函数描述	: 恢复图像：将曝光未获取成功的图像，重新获取出来
//-----------------------------------------------------------------------------
bool YuyingCtrl::RecoverImage()
{
	return true;
}

bool YuyingCtrl::IsConnected(string strIP)
{
	//mLog::FINFO("Check ping {$}", strIP);

	CMyPingip obPingIp;
	StatusFeedback(EVT_STATUS_PING, 0, "true");
	if (!obPingIp.PingFunction(strIP.c_str()))
	{
		//mLog::FINFO("ping {$} Failed", strIP);
		StatusFeedback(EVT_STATUS_PING, 0, "false");
		return false;
	}
	return true;
}

//-----------------------------------------------------------------------------
// Reconnect探测器（上层有button）
//-----------------------------------------------------------------------------
bool YuyingCtrl::ResetFPD(nsDPC::FPDDeviceYuying* pDrvDPC)
{
	//mLog::FINFO("Reset FPD");

	if ((*m_pDPC2PanelID)[pDrvDPC] != m_nDetectorIndex)
	{
		//mLog::FWARN("Not current DPC, return");
		return false;
	}
	//mLog::FINFO("Panel Count {$}\n", m_nPanelCount);
	for (int nDetectorID = 0; nDetectorID < m_nPanelCount; nDetectorID++)
	{
		if (!m_stDeviceIndex[nDetectorID].bWireless)
		{
			//mLog::FERROR("Omit reconnection in fixed FD");
		}
		else
		{
			StartInitFPDThread();
		}
	}

	return true;
}

void YuyingCtrl::OnProcessPreImg()
{
	if (m_bPreviewEnable)
	{
		DataFeedback(EVT_DATA_PREVIEW_IMAGE, m_pwPreviewImg);
	}
}

void YuyingCtrl::OnProcessImg()
{
	if (m_nLeftOffset != 0 || m_nTopOffset != 0)
	{
		if (m_nSaveRaw)
		{
		}
		//mLog::FDEBUG("Begin get effect image, m_nRawImgWidth {$}\n", m_nRawImgWidth);
		if (!GetEffectiveImage(m_pImgBuffer, m_pwRawImageData, m_nRawImgWidth))
		{
			//mLog::FERROR("Get effect image failed");
			return;
		}
		//mLog::FDEBUG("Get effect image over");
	}
	else
	{
		memcpy(m_pImgBuffer, m_pwRawImageData, m_nImageHeight * m_nImageWidth * sizeof(WORD));
	}

	DataFeedback(EVT_DATA_RAW_IMAGE, m_pImgBuffer);
}

// pOutImg: 裁剪后图像;	pInImg: 裁剪前图像;	nInWidth: 裁剪前图像宽度
bool YuyingCtrl::GetEffectiveImage(WORD* pOutImg, WORD* pInImg, int nInWidth)
{
	if (pOutImg == nullptr || pInImg == nullptr || nInWidth < 0)
	{
		//mLog::FERROR("Illegal parameter, can not get effective image");
		return false;
	}
	try
	{
		for (int i = 0; i < m_nImageHeight; i++)
		{
			memcpy(pOutImg + i * m_nImageWidth,
				pInImg + (i + m_nTopOffset) * nInWidth + m_nLeftOffset,
				m_nImageWidth * sizeof(WORD));
		}
	}
	catch (...)
	{
		//mLog::FERROR("Get effective image crashed. m_nImageWidth {$},m_nImageHeight {$},m_nWidthOffset {$},m_nHeightOffset {$},m_nBottomOffset {$}\n",
			m_nImageWidth, m_nImageHeight, m_nLeftOffset, m_nTopOffset, m_nBottomOffset);
		return false;
	}
	return true;
}

/***
* 保存RAW图像
***/
bool YuyingCtrl::SaveRawImage(const char* pImgName, const WORD* pRawImg, int nWidth, int nHeight)
{
	//mLog::FINFO("Begin to Save {$} Image, width: {$}, height: {$}", pImgName, nWidth, nHeight);
	if (pRawImg == nullptr || pImgName == nullptr)
	{
		return false;
	}
	string strImagePath = m_strAppPath + "\\rawdata\\" + pImgName;

	FILE* fp;
	if ((fp = fopen(strImagePath.c_str(), "wb")) == nullptr)
	{
		DWORD dw = GetLastError();
		//mLog::FERROR("fopen {$} failed, {$}", strImagePath.c_str(), dw);
		return false;
	}
	fwrite(pRawImg, sizeof(WORD), nWidth * nHeight, fp);
	fclose(fp);

	//mLog::FINFO("End to Save Raw Image");
	return true;
}

//图像回调
bool YuyingCtrl::ImageReadyCallbackProcess(const char* pImage, int iFlag)
{
	return g_pYuyingCtrl->onImageReadyCallbackProcess(pImage, iFlag);
}

//系统回调
bool YuyingCtrl::SystemInfoCallbackProcess(SystemInfoCode iCodeIndex, const char* sContent)
{
	return g_pYuyingCtrl->onSystemInfoCallbackProcess(iCodeIndex, sContent);
}

bool YuyingCtrl::onImageReadyCallbackProcess(const char* pImage, int iFlag)
{
	//mLog::FINFO("onImageReadyCallbackProcess");
	if (nullptr == pImage)
	{
		//mLog::FWARN("Image Data is null");
		return false;
	}

	StatusFeedback(EVT_STATUS_PANEL, PANEL_XRAY_ON);

	if (ModeType::AED_Mode == m_stDeviceIndex[m_nDetectorIndex].nSyncMode)
	{
		while (!m_bAEDWorkFlag)
		{
			Sleep(20);
		}

		StatusFeedback(EVT_STATUS_PANEL, PANEL_XWINDOW_ON);
		StartXWindowOffThread();
	}

	if (m_pwRawImageData)
	{
		delete[] m_pwRawImageData;
		m_pwRawImageData = nullptr;
	}
	m_pwRawImageData = new WORD[m_nRawImgHeight * m_nRawImgWidth];
	if (m_pwRawImageData == nullptr)
	{
		//mLog::FWARN("Allocate Raw Image Failed");
		return false;
	}
	memcpy(m_pwRawImageData, pImage, m_nRawImgHeight * m_nRawImgWidth * sizeof(WORD));

	OnProcessImg();
	return true;
}

bool YuyingCtrl::onSystemInfoCallbackProcess(SystemInfoCode iCodeIndex, const char* sContent)
{
	switch (iCodeIndex)
	{
		case SIC_Exposure_Window_Open: //软同步或者硬同步发开窗
		{
			//mLog::FINFO("SIC_Exposure_Window_Open");
			if (ModeType::Software_Mode == m_stDeviceIndex[m_nDetectorIndex].nSyncMode || ModeType::Outer_Mode == m_stDeviceIndex[m_nDetectorIndex].nSyncMode)
			{
				StatusFeedback(EVT_STATUS_PANEL, PANEL_XWINDOW_ON);
			}
			break;
		}
		case SIC_Exposure_Winodw_Closed:
		{
			//mLog::FINFO("SIC_Exposure_Winodw_Closed");
			if (ModeType::Software_Mode == m_stDeviceIndex[m_nDetectorIndex].nSyncMode || ModeType::Outer_Mode == m_stDeviceIndex[m_nDetectorIndex].nSyncMode)
			{
				StatusFeedback(EVT_STATUS_PANEL, PANEL_XWINDOW_OFF);
			}
			break;
		}
		case SIC_Exposure_Window_Timeout:
		{
			//mLog::FINFO("SIC_Exposure_Window_Timeout");
			break;
		}
		case SIC_Device_Heart_Beat:
		{
			////mLog::FINFO("SIC_Device_Heart_Beat: {$}", sContent);
			if (nullptr == sContent)
			{
				//mLog::FINFO("null content");
				break;
			}

			//温度
			if (m_stDeviceIndex[m_nDetectorIndex].bTemperatureEnable)
			{
				const char* pTempera = strstr(sContent, "T:");
				if (pTempera != nullptr)
				{
					float fTemperature = (float)atof(pTempera + 2);
					StatusFeedback(EVT_STATUS_TEMPERATURE, 0, "", m_nDetectorIndex, fTemperature);
				}
			}

			//湿度
			if (m_stDeviceIndex[m_nDetectorIndex].bHumidityEnable)
			{
				const char* pHumidity = strstr(sContent, "H:");
				if (pHumidity != nullptr)
				{
					int nHumidity = atoi(pHumidity + 2);
				}
			}

			if (m_stDeviceIndex[m_nDetectorIndex].bBatteryEnable)
			{
				//供电方式（1电池供电，2电源供电)
				const char* pPower = strstr(sContent, "P:");
				int nChargingType = 0;
				if (pPower != nullptr)
				{
					nChargingType = atoi(pPower + 2);
				}
				if (nChargingType == 1)
				{
					//mLog::FINFO("Power mode: Battery");
				}
				else if (nChargingType == 2)
				{
					//mLog::FINFO("Power mode: Cable");
				}
				else
				{
					//mLog::FINFO("Undefined power mode");
				}

				//电量
				const char* pBatt = strstr(sContent, "E:");
				if (pBatt != nullptr)
				{
					int nBatteryValue = atoi(pBatt + 2);
					StatusFeedback(EVT_STATUS_BATTERY_VALUE, nBatteryValue, "", m_nDetectorIndex);
				}
			}

			//信号强度
			if (m_stDeviceIndex[m_nDetectorIndex].bWifiEnable)
			{
				const char* pSignalValue = strstr(sContent, "S:");
				if (pSignalValue != nullptr)
				{
					int nSignalValue = atoi(pSignalValue + 2);
					StatusFeedback(EVT_STATUS_WIFI, nSignalValue, "", m_nDetectorIndex);
				}
			}			
			break;
		}
		case SIC_Physical_Connection_State:
		{
			//mLog::FINFO("SIC_Physical_Connection_State: {$}", sContent ? sContent : "null");
			if (nullptr == sContent)
			{
				//mLog::FINFO("null content");
				break;
			}
			if (sContent[0] == '0')
			{
				//mLog::FINFO("Detector disconnect");
			}
			else
			{
				//mLog::FINFO("Detector communication recovery");
			}
			break;
		}
		case SIC_Upload_Tmp_File_Begin:
		{
			//mLog::FINFO("SIC_Upload_Tmp_File_Begin");
			break;
		}
		case SIC_Upload_Tmp_File_End:
		{
			//mLog::FINFO("SIC_Upload_Tmp_File_End");
			break;
		}
		case SIC_TCP_Connection_State:
		{
			//mLog::FINFO("SIC_TCP_Connection_State");
			break;
		}
		case SIC_Power_Low:
		{
			//mLog::FINFO("SIC_Power_Low");
			break;
		}
		case SIC_Power_Down_Soon:
		{
			//mLog::FINFO("SIC_Power_Down_Soon");
			break;
		}
		case SIC_FPD_Sleep_State:
		{
			//mLog::FINFO("SIC_FPD_Sleep_State");
			break;
		}
		case SIC_FPD_MultiFrame_Index:
		{
			//mLog::FINFO("SIC_FPD_MultiFrame_Index");
			break;
		}
		case SIC_FPD_IndustryMode_Prepare_Rready:
		{
			//mLog::FINFO("SIC_FPD_IndustryMode_Prepare_Rready");
			break;
		}
		case SIC_FPD_MFM_Prepare_Ready:
		{
			//mLog::FINFO("SIC_FPD_MFM_Prepare_Ready");
			break;
		}
		default:
			break;
	}
	return true;
}

//设置同步模式
bool YuyingCtrl::ActiveSyncMode(nsDPC::FPDDeviceYuying* pDrvDPC, int nSyncMode)
{
	if ((*m_pDPC2PanelID)[pDrvDPC] != m_nDetectorIndex)
	{
		//mLog::FWARN("Not current DPC, return");
		return false;
	}
	//mLog::FINFO("ActiveSyncMode {$}", nSyncMode);
	int tempSyncMode = 0;
	if (nSyncMode == 1)
	{
		tempSyncMode = ModeType::Software_Mode;
	}
	else if (nSyncMode == 2)
	{
		tempSyncMode = ModeType::Outer_Mode;
	}
	else if (nSyncMode == 3)
	{
		tempSyncMode = ModeType::AED_Mode;
	}

	//mLog::FINFO("To  SetDetectorWorkMode {$}", tempSyncMode);

	if (m_stDeviceIndex[m_nDetectorIndex].nSyncMode == tempSyncMode)
	{
		//mLog::FINFO("Same sync mode, omit set sync mode");
		return true;
	}
	const char* szDetectorID = m_vecDetectorID[m_nDetectorIndex].c_str();
	if (SetDetectorWorkMode(m_nDetectorID, szDetectorID, tempSyncMode))
	{
		m_stDeviceIndex[m_nDetectorIndex].nSyncMode = tempSyncMode;
		//mLog::FINFO("Set detector sync mode into {$}", tempSyncMode);
	}
	else
	{
		//mLog::FERROR("Set detector sync mode failed!");
	}
	
	return true;
}