PhysicalDevice/Generator/SPELLMAN/DIOS.Dev.Generator.SPELLMAN_VMX/DIOS.Dev.Generator.SPELLMAN_VMX.h

#pragma once

#include <atomic>
#include "IODeviceWithSCF.tlh"
#include "IODeviceWithSCF.tli"

#include "CCOS.Dev.IODevice.Detail.hpp"
#include "CCOS.Dev.MSGMould.hpp"

#include "CCOS.Dev.Generator.Mould.hpp"
//#include "DAP.BasicMoulds.hpp"


#ifdef CCOSDEVGENSPELLMANVMX_EXPORTS
#define _CCOSDEVGENSPELLMANVMX_API __declspec(dllexport)
#else
#define _CCOSDEVGENSPELLMANVMX_API __declspec(dllimport)
#endif

enum VMX_REGULATION_LEVEL { //故障等级
	REG_ERRO,
	REG_WARN
};
enum VMX_CHARGE_STATE { //电池状态
	POWER_LOW,
	POWER_NOR
};

namespace CCOS::Dev::Detail::Generator
{
	static const int TIMEOUTVALUE = 100;
	/*暂不使用
	using JSONString = std::string;
	namespace DevDAP = CCOS::Dev::Detail::DAP;
	*/
//-----------------------------------------------------------------------------
//		SpellManVMXDevice
//-----------------------------------------------------------------------------

	class  _CCOSDEVGENSPELLMANVMX_API  SpellManVMXDevice : public IODeviceWithSCF <IODeviceDetail>,public GeneratorMould
	{
		using super = IODeviceWithSCF <IODeviceDetail>;
		using superGen = GeneratorMould;
		
	public:
		SpellManVMXDevice (std::shared_ptr <IOEventCenter> center, nsSCF::SCF SCF, string configfile);
		~SpellManVMXDevice ();
		//发生器支持的通用命令
		virtual std::string GetGUID() const override;
		virtual RET_STATUS IncKV() override;
		virtual RET_STATUS DecKV() override;
		virtual RET_STATUS SetKV(float value) override;
		virtual RET_STATUS IncMA() override;
		virtual RET_STATUS DecMA() override;
		virtual RET_STATUS SetMA(float value) override;
		virtual RET_STATUS IncMS() override;
		virtual RET_STATUS DecMS() override;
		virtual RET_STATUS SetMS(float value) override;
		virtual RET_STATUS IncMAS() override;
		virtual RET_STATUS DecMAS() override;
		virtual RET_STATUS SetMAS(float value) override;
		virtual RET_STATUS SetTechmode(int value) override;
		virtual RET_STATUS SetEXAMMode(std::string value) override;
		virtual RET_STATUS SetFocus(int value) override;
		virtual RET_STATUS SetAPR(const _tAPRArgs& t) override;
		virtual RET_STATUS QueryHE(int& value) override;
		virtual RET_STATUS QueryPostKV(float& value) override;
		virtual RET_STATUS QueryPostMA(float& value) override;
		virtual RET_STATUS QueryPostMS(float& value) override;
		virtual RET_STATUS QueryPostMAS(float& value) override;
		virtual RET_STATUS SetExpEnable() override;
		virtual RET_STATUS SetExpDisable()override;
		virtual RET_STATUS Reset()override;
		RET_STATUS RefreshData();
		RET_STATUS SetRPS(int rps);//设置连续点片帧率,暂不使用

		//发生器不支持的命令
		virtual RET_STATUS SetAECDensity(int value) override;
		virtual RET_STATUS SetAECField(int value) override;
		virtual RET_STATUS SetAECFilm(int value) override;
		virtual RET_STATUS SetWS(const std::string value) override;
		virtual RET_STATUS SetGenSynState(int value) override;
		virtual RET_STATUS SetGenState(int value) override;
		virtual RET_STATUS SetExpMode(std::string value) override;
		virtual RET_STATUS SetFrameRate(FLOAT frameRate) override;
		virtual RET_STATUS SetFLFMode(std::string value) override;
		RET_STATUS Clear_DAP();
		RET_STATUS GetValue_DAP(float& value);
		RET_STATUS StartMove();
		RET_STATUS EndMove();

		//暂不对外提供的指令(VMX特有指令)
		RET_STATUS SetHSSSpeed(int value); //设置转子转速
		RET_STATUS SetBrakeAfterExpo(int value); //设置曝光结束后立即停止转子
		RET_STATUS SetBreakAfterExpoHangTime(int value); //设置曝光结束后转子维持转速的时间
		RET_STATUS SetSmartAEC(int value); //智能AEC
		RET_STATUS SetStandardAEC(int value); //标准AEC
		RET_STATUS ReqExpandedHSSStatus(); //请求转子转速
		void ReConnect(); //重连
		//virtual RET_STATUS SetGeneratortoSyncStatus(std::string value); //Demo模式会用到

	public:
		ResDataObject m_GenConfig;  //driver's config file.
		//线程变量互斥锁
		atomic<int> m_iReSendCMD;	        //初始命令重发次数
		static atomic<int> m_iLoopTime;	    //循环间隔时间（毫秒）
		atomic<int> m_iCompPostMAS;	        //计算PostMAS条件统计
		atomic<int> m_iHeartBeats;	        //心跳统计
		atomic<bool> m_bConnectFlag;	    //连接标记
		bool m_bAECCtlSignal;	    //在曝光设置更新期间,AEC控制信号必须处于低状态
		bool m_bSmartAEC;	    //在曝光设置更新期间,AEC控制信号必须处于低状态


	private:
		//std::unique_ptr<DevDAP::DOSEMould> m_DAP; //暂不使用
		std::unique_ptr<nsDetail::MSGUnit> m_MSGUnit; //处理消息上报对象指针
		HANDLE m_pHardwareStatusThread; //轮询线程句柄
		bool m_bExpEnable;	           //曝光使能
		bool m_bInvalidKVMASSetupFlag; //写入到设备的曝光设置无效
		bool m_bFaultList[18];	       //记录 主机请求固件报告故障命令 返回的故障记录
		bool m_bCMD68Flag;	           //防止 命令31之后主机请求68命令返回真，再查一次68返回又为假

	private:
		RET_STATUS  HWSend(char* strCommand, int nTimeOut = TIMEOUTVALUE); //指令发送接口
		void OnCallBack(); //处理指令回调函数
		void Register(); //注册对外提供的属性、方法
		bool StartHardwareStatusThread();				//启动轮询线程
		static DWORD HardwareStatusThread(LPVOID pParam); //定时查询状态信息
		void FireNotify (std::string key, std::string context);	 //向上层上报消息
		void FireErrorMessage(const bool Act, const int Code, const char* ResInfo = ""); //上报错误消息
		void FireWarnMessage(const bool Act, const int Code, const char* ResInfo = ""); //上报告警消息
		
	};

}


	//-----------------------------------------------------------------------------
	//		SpellManVMXDriver
	//-----------------------------------------------------------------------------

namespace CCOS::Dev::Detail::Generator
{
	class  _CCOSDEVGENSPELLMANVMX_API  SpellManVMXDriver : public IODriverWithSCF <DriverMould>
	{
		using super = IODriverWithSCF <DriverMould>;

	public:
		SpellManVMXDriver ();
		virtual ~SpellManVMXDriver ();

	public:
		//virtual bool DriverEntry (std::string CfgFileName); //设置配制文件路径,对外接口最先调用
		virtual void Prepare () override; //在 DriverEntry 之后执行;选择与物理设备通信方式（串口、TCP）
		virtual std::string DriverProbe() override; //在 Prepare 之后执行;读取配置文件模块参数，供上层创建驱动work路径

		virtual bool DATA_ACTION  Connect () override; //在 DriverProbe 之后执行;根据通信方式与物理设备进行连接
		virtual auto CreateDevice(int index)->std::unique_ptr <IODevice> override; //在 Connect 之后执行;创建逻辑设备，供上层创建驱动树节点
		
		virtual bool isConnected() const override; //检查驱动与物理设备连接状态
		virtual std::string GetResource() override; //获取配置文件的值
		virtual std::string DeviceProbe() override; //读取配置文件模块参数，供上层创建设备work路径

		virtual void Disconnect() override; //断开驱动与物理设备连接状态

		virtual void Dequeue (const char * Packet, DWORD Length) override; //在super::Connect中轮询,调用 DecodeFrame:查找指令操作对照表,通过对应操作更新数据并调用FireNotify上报更新
		virtual void FireNotify (int code, std::string key, std::string content) override; //向监听者上报事件
		static PACKET_RET callbackPackageProcess(const char* RecData, DWORD nLength, DWORD& PacketLength); //判断从设备读到的数据有没有可用的数据包，有则最终调度到 Dequeue

	private:
		bool SaveConfigFile(bool bSendNotify);
		virtual bool GetDeviceConfig(std::string& Cfg) override;
		virtual bool SetDeviceConfig(std::string Cfg) override;
		bool GetDeviceConfigValue(ResDataObject config, const char* pInnerKey, int nPathID, string& strValue);
		bool SetDeviceConfigValue(ResDataObject& config, const char* pInnerKey, int nPathID, const char* szValue);

		ResDataObject m_DeviceConfig;
		ResDataObject m_ConfigAll; //存储当前的配置，用于修改配置时写回文件
		ResDataObject m_Configurations; //存储当前配置中“CONFIGURATION”节点的内容

		//webconfig使用
		ResDataObject m_DeviceConfigSend;
		string g_strAppPath;
		std::unique_ptr <ResDataObject> m_pAttribute;
		std::unique_ptr <ResDataObject>  m_pDescription;
	};

}