UserConfig.ini 931 B

123456789101112131415161718192021222324252627282930313233343536373839404142434445
  1. [UserConfigs]
  2. Save Image Path=
  3. Is Save Image=0
  4. Acquire Number=1
  5. Is Save Log=0
  6. Save Log Path=
  7. Gain File Path=
  8. Defect File Path=
  9. AED Offset File Path=
  10. Offset File Path=
  11. Acquire Times In GTF=5
  12. Pre Expo Threshold H=65024
  13. Pre Expo Threshold L=1000
  14. Window Level=0
  15. Window Width=0
  16. Wire Type=1
  17. Wired Remote IP 1=192.168.8.20
  18. Wired Remote Port 1=27999
  19. Wired Local IP 1=192.168.8.8
  20. Wired Local Port 1=28000
  21. Wired Remote IP 2=192.168.6.6
  22. Wired Remote Port 2=27999
  23. Wired Local IP 2=192.168.6.9
  24. Wired Local Port 2=28000
  25. Wireless Remote IP 1=192.168.8.20
  26. Wireless Remote Port 1=27998
  27. Wireless Remote IP 2=192.168.6.2
  28. Wireless Remote Port 2=27998
  29. Show Industry Mode = 0
  30. Control Box Name 1=
  31. Is CB1 Checked=0
  32. Control Box Name 2=
  33. Is CB2 Checked=0
  34. Language=0
  35. Show Reset Config Window=0
  36. Show MultiFrame Mode=0
  37. Show Active Window = 0
  38. Change Wifi Name=0
  39. Set Wifi IP=0
  40. Set Router Info=0
  41. Upgrade Firmware=0