PhysicalDevice/Detector/CareRay/DIOS.Dev.FPD.CareRayDR-EVerestviev/DIOS.Dev.FPD.CareRayDR.cpp

#include "stdafx.h"
#include "CCOS.Dev.FPD.CareRayDR.h"
#include "common_api.h"
#include "DICOMImageHeadKey.h"
#include "Detector_CareRayDR.h"


namespace nsFPD = CCOS::Dev::Detail::Detector;

//-----------------------------------------------------------------------------
//		FPDDeviceCareRay
//-----------------------------------------------------------------------------
extern Detector_CareRayDR* g_pDetector;

static nsFPD::CareRayDriver gIODriver;

Log4CPP::Logger* gLogger = nullptr;

extern "C"  CCOS::Dev::IODriver * __cdecl GetIODriver()		// 返回静态对象的引用, 调用者不能删除 !
{
	return &gIODriver;
}

extern "C"  CCOS::Dev::IODriver * __cdecl CreateIODriver()  // 返回新对象, 调用者必须自行删除此对象 !
{
	return new nsFPD::CareRayDriver();
}

nsFPD::CareRayDriver::CareRayDriver()
{
	pObjDev = nullptr;
	m_bDriverConnect = false; //缺省为false
	m_pAttribute.reset(new ResDataObject());
	m_pDescription.reset(new ResDataObject());
}

nsFPD::CareRayDriver::~CareRayDriver()
{
	if (pObjDev != nullptr)
	{
		delete pObjDev;
		pObjDev = nullptr;
	}
}

void nsFPD::CareRayDriver::Prepare()
{
	printf("CareRayDR driver module: prepare \r\n");
	string strLogPath = GetProcessDirectory() + R"(\OEMDrivers\Detector\Conf\Log4CPP.Config.FPD.xml)";

	Log4CPP::GlobalContext::Map::Set(ZSKK::Utility::Hash("LogFileName"), "FPD.CareRayDR");

	auto rc = Log4CPP::LogManager::LoadConfigFile(strLogPath.c_str());
	gLogger = Log4CPP::LogManager::GetLogger("FPD.CareRayDR");

	Info("CareRayDriver::Prepare get logger FPD.CareRayDR");
}


bool nsFPD::CareRayDriver::Connect()
{
	printf("CareRay driver module: Connect \r\n");
	Info("--Func-- driver connect \n");

	pObjDev = new FPDDeviceCareRay(EventCenter, m_ConfigFileName);
	m_bDriverConnect = true; //connect执行完毕，置为true
	printf("CareRay driver module: Connect over\r\n");
	return true;
}


void nsFPD::CareRayDriver::Disconnect()
{
	printf("CareRay driver module: Disconnect \r\n");
	Info("--Func-- driver disconnect \n");
	m_bDriverConnect = false; //disconnect置为false
}


bool nsFPD::CareRayDriver::isConnected() const
{
	return m_bDriverConnect;
}


auto nsFPD::CareRayDriver::CreateDevice(int index)->std::unique_ptr <IODevice>
{
	printf("CareRay driver module: CreateDevice \r\n");
	Info("--Func-- driver createdevice \n");
	auto Device = std::unique_ptr<IODevice>(new IODevice(pObjDev));
	pObjDev->CreateDevice();
	pObjDev->Register();
	return Device;
}


std::string nsFPD::CareRayDriver::DriverProbe()
{
	printf("CareRayDriver::DriverProbe \r\n");
	Info("CareRayDriver::DriverProbe config name:{$}", m_ConfigFileName);
	ResDataObject r_config, HardwareInfo;
	if (r_config.loadFile(m_ConfigFileName.c_str()))
	{
		HardwareInfo.add("MajorID", r_config["CONFIGURATION"]["MajorID"]);
		HardwareInfo.add("MinorID", r_config["CONFIGURATION"]["MinorID"]);
		HardwareInfo.add("VendorID", r_config["CONFIGURATION"]["VendorID"]);
		HardwareInfo.add("ProductID", r_config["CONFIGURATION"]["ProductID"]);
		HardwareInfo.add("SerialID", r_config["CONFIGURATION"]["SerialID"]);
	}
	else
	{
		HardwareInfo.add("MajorID", "Detector");
		HardwareInfo.add("MinorID", "DR");
		HardwareInfo.add("VendorID", "CareRay");
		HardwareInfo.add("ProductID", "4343W");
		HardwareInfo.add("SerialID", "Driver");
	}
	string str = HardwareInfo.encode();
	return str;
}


/***
** 获取ID和配置
***/
std::string nsFPD::CareRayDriver::GetResource()
{
	ResDataObject r_config, temp;
	if (!temp.loadFile(m_ConfigFileName.c_str()))
	{
		Error("GetResource load {$} fail!", m_ConfigFileName);
		return "";
	}

	m_ConfigAll = temp;
	r_config = temp["CONFIGURATION"];
	m_Configurations = r_config;

	ResDataObject DescriptionTemp;
	ResDataObject ListTemp;
	string strTemp = ""; //用于读取字符串配置信息
	string strIndex = ""; //用于读取配置信息中的List项
	int nTemp = -1; //用于读取整型配置信息
	char sstream[10] = { 0 }; //用于转换值
	string strValue = ""; //用于存储配置的值
	string strType = ""; //用于存储配置的类型 int/float/string...
	string strAccess = ""; //用于存储权限的类型 R/W/RW
	string strRequired = ""; // TRUE/FALSE
	string strDefaultValue = "";
	string strRangeMin = "";
	string strRangeMax = "";

	try
	{
		string strFPD = (string)r_config["VendorID"];
		ConfigInfo FPDVender(ConfKey::CcosDetectorType, "string", "R", "TRUE", strFPD.c_str());
		AddConfig(FPDVender);
		strFPD = (string)r_config["ProductID"];
		ConfigInfo FPDModel(ConfKey::CcosDetectorModel, "string", "R", "TRUE", strFPD.c_str());
		AddConfig(FPDModel);

		int nConfigInfoCount = (int)r_config["ConfigToolInfo"].GetKeyCount("AttributeInfo");

		for (int nInfoIndex = 0; nInfoIndex < nConfigInfoCount; nInfoIndex++)
		{
			DescriptionTemp.clear();
			ListTemp.clear();
			//AttributeType
			strType = (string)r_config["ConfigToolInfo"][nInfoIndex]["AttributeDescripition"]["Type"];

			//AttributeAccess
			strAccess = (string)r_config["ConfigToolInfo"][nInfoIndex]["AttributeDescripition"]["Access"];

			//AttributeRequired
			strRequired = (string)r_config["ConfigToolInfo"][nInfoIndex]["AttributeDescripition"]["Required"];

			//AttributeDefaultValue
			strDefaultValue = (string)r_config["ConfigToolInfo"][nInfoIndex]["AttributeDescripition"]["DefaultValue"];

			strTemp = (string)r_config["ConfigToolInfo"][nInfoIndex]["AttributeKey"];

			ConfigInfo  FPDAttr(strTemp.c_str(), strType.c_str(), strAccess.c_str(), strRequired.c_str(), strDefaultValue.c_str());

			//AttributeKey
			//1. 根据AttributeType，内部key和配置路径，拿到当前的真实值
			strTemp = (string)r_config["ConfigToolInfo"][nInfoIndex]["InnerKey"];
			nTemp = (int)r_config["ConfigToolInfo"][nInfoIndex]["PathID"];
			GetDeviceConfigValue(r_config, strTemp.c_str(), nTemp, strValue);
			//2. 赋值
			FPDAttr.SetCurrentValue(strValue.c_str());

			//AttributeRangeMin
			strRangeMin = (string)r_config["ConfigToolInfo"][nInfoIndex]["AttributeDescripition"]["RangeMin"];

			//AttributeRangeMax
			strRangeMax = (string)r_config["ConfigToolInfo"][nInfoIndex]["AttributeDescripition"]["RangeMax"];
			if (strRangeMax != "" && strRangeMin != "") //不需要的配置项为空
			{
				FPDAttr.SetRange(strRangeMin.c_str(), strRangeMax.c_str());
			}

			//AttributeList
			nTemp = r_config["ConfigToolInfo"][nInfoIndex]["AttributeDescripition"]["ListNum"];
			if (nTemp > 0) //ListNum不大于0时说明不需要list配置
			{
				for (int nListIndex = 0; nListIndex < nTemp; nListIndex++)
				{
					strTemp = (string)r_config["ConfigToolInfo"][nInfoIndex]["AttributeDescripition"]["ListInfo"][nListIndex];
					sprintf_s(sstream, "%d", nListIndex);
					ListTemp.add(sstream, strTemp.c_str());
				}
				FPDAttr.SetList(ListTemp.encode());
			}

			AddConfig(FPDAttr);
		}
	}
	catch (ResDataObjectExption& e)
	{
		Error("Get config error: {$}", e.what());
		return "";
	}

	ResDataObject resAttr, resDescription;
	for (auto Item : m_ConfigInfo)
	{
		resAttr.add(Item.GetKey(), Item.GetCurrentValue());
		resDescription.add(Item.GetKey(), Item.GetDescription());
	}
	ResDataObject resDeviceResource;
	resDeviceResource.add(ConfKey::CcosDetectorAttribute, resAttr);
	resDeviceResource.add(ConfKey::CcosDetectorDescription, resDescription);

	ResDataObject DescriptionTempEx;
	DescriptionTempEx.add(ConfKey::CcosDetectorConfig, resDeviceResource);

	m_DeviceConfig = DescriptionTempEx;
	(*m_pAttribute) = resAttr;
	(*m_pDescription) = resDescription;

	string res = DescriptionTempEx.encode();
	printf("CareRay driver module: get resource over \r\n");
	return res;
}


std::string nsFPD::CareRayDriver::DeviceProbe()
{
	printf("CareRay driver module: Device Probe \r\n");
	ResDataObject r_config, HardwareInfo;
	if (r_config.loadFile(m_ConfigFileName.c_str()))
	{
		HardwareInfo.add("MajorID", r_config["CONFIGURATION"]["MajorID"]);
		HardwareInfo.add("MinorID", "Device");
		HardwareInfo.add("VendorID", r_config["CONFIGURATION"]["VendorID"]);
		HardwareInfo.add("ProductID", r_config["CONFIGURATION"]["ProductID"]);
		HardwareInfo.add("SerialID", r_config["CONFIGURATION"]["SerialID"]);
	}
	else
	{
		HardwareInfo.add("MajorID", "Detector");
		HardwareInfo.add("MinorID", "Device");
		HardwareInfo.add("VendorID", "CareRay");
		HardwareInfo.add("ProductID", "4343W");
		HardwareInfo.add("SerialID", "1234");
	}
	string str = HardwareInfo.encode();
	return str;
}


bool nsFPD::CareRayDriver::GetDeviceConfig(std::string& Cfg)
{
	Cfg = m_DeviceConfig.encode();
	Info("GetDeviceConfig over");
	return true;
}


bool nsFPD::CareRayDriver::SetDeviceConfig(std::string Cfg)
{
	Info("--Func-- SetDeviceConfig {$}\n", Cfg.c_str());
	ResDataObject DeviceConfig;
	DeviceConfig.decode(Cfg.c_str());

	ResDataObject DescriptionTempEx;
	DescriptionTempEx = DeviceConfig["DeviceConfig"];

	bool bSaveFile = false; //true:重新保存配置文件
	string strAccess = "";
	for (int i = 0; i < DescriptionTempEx.size(); i++)
	{
		ResDataObject temp = DescriptionTempEx[i];
		Info("{$}", temp.encode());
		for (int j = 0; j < temp.size(); j++)
		{
			string strKey = temp.GetKey(j);
			Info("{$}", strKey.c_str());
			try
			{
				if (m_pAttribute->GetFirstOf(strKey.c_str()) >= 0)
				{
					strAccess = (string)(*m_pDescription)[strKey.c_str()]["Access"];
					if ("RW" == strAccess || "rw" == strAccess)
					{
						//修改对应配置，在其他单元的配置项要同时调用其修改函数修改真实值
						//1. 修改内存中的值，用于给上层发消息
						(*m_pAttribute)[strKey.c_str()] = temp[j];
						//2. 拿到Innerkey
						int nConfigInfoCount = (int)m_Configurations["ConfigToolInfo"].GetKeyCount("AttributeInfo");
						Info("ConfigInfo Count: {$}", nConfigInfoCount);
						string strTemp = ""; //存储AttributeKey
						for (int nInfoIndex = 0; nInfoIndex < nConfigInfoCount; nInfoIndex++)
						{
							strTemp = (string)m_Configurations["ConfigToolInfo"][nInfoIndex]["AttributeKey"];
							if (strTemp == strKey)
							{
								strTemp = (string)m_Configurations["ConfigToolInfo"][nInfoIndex]["InnerKey"];
								break;
							}
						}
						//3. 修改配置文件中的值
						if (SetDeviceConfigValue(m_Configurations, strTemp.c_str(), 1, temp[j]))
						{
							bSaveFile = true;
						}
					}
					else
					{
						Info("{$} is not a RW configuration item", strKey.c_str());
					}
				}
			}
			catch (ResDataObjectExption& e)
			{
				Error("SetDriverConfig crashed: {$}", e.what());
				return false;
			}
		}
	}

	if (bSaveFile)
	{
		//3. 重新保存配置文件
		SaveConfigFile(true);
	}
	return true;
}


bool nsFPD::CareRayDriver::SaveConfigFile(bool bSendNotify)
{
	m_ConfigAll["CONFIGURATION"] = m_Configurations;
	bool ret = m_ConfigAll.SaveFile(m_ConfigFileName.c_str());
	if (ret) 
	{
		Info("SaveConfigFile Success!");
		return true;
	}
	else 
	{
		Error("SaveConfigFile Fail!");
		return false;
	}
}


bool nsFPD::CareRayDriver::GetDeviceConfigValue(ResDataObject config, const char* pInnerKey,
	int nPathID, string& strValue)
{
	strValue = "";
	string strTemp = pInnerKey;
	if (1 == nPathID) //从DriverConfig路径下每个DPC自己的配置文件读取
	{
		if (WiredIP == strTemp || WirelessIP == strTemp || LocalIP == strTemp)
		{
			strValue = (string)config["connections"][pInnerKey];
		}
		else if (DetectorVender == strTemp || DetectorModel == strTemp ||
			DetectorDescription == strTemp || DetectorSerialNumber == strTemp)
		{
			strValue = (string)config[pInnerKey];
		}
		else if (SyncType == strTemp || FPDWorkStation == strTemp ||
			ImageWidth == strTemp || ImageHeight == strTemp)
		{
			strValue = (string)config["ModeTable"]["DetectorMode"][pInnerKey];
		}
		else if (TempMaxLimit == strTemp || ReConnect == strTemp ||
			TempUpperLimit == strTemp || TempLowerLimit == strTemp || TempMinLimit == strTemp ||
			BatLowerLimit == strTemp || BatMiniLimit == strTemp ||
			BatLowerLimitInCali == strTemp || WifiLowerLimit == strTemp ||
			WifiMiniLimit == strTemp || HighPowerTimeout == strTemp ||
			ShowTemperature == strTemp || ShowWifi == strTemp ||
			ShowBattery == strTemp || ShowBluetooth == strTemp ||
			FPDExamMode == strTemp || FPDAcqMode == strTemp || FPDModeMatch == strTemp || 
			CcosDetectorAttachedFlag == strTemp)
		{
			strValue = (string)config[pInnerKey];
		}
		else
		{
			strValue = "";
			Error("Error Configuration item: {$}", pInnerKey);
		}
	}
	return true;
}


bool nsFPD::CareRayDriver::SetDeviceConfigValue(ResDataObject &config, const char* pInnerKey,
	int nPathID, const char* szValue)
{
	string strTemp = pInnerKey;
	Info("Begin to change {$} item value to {$}", pInnerKey, szValue);
	if (1 == nPathID) //从DriverConfig路径下每个DPC自己的配置文件读取
	{
		if (WiredIP == strTemp || WirelessIP == strTemp || LocalIP == strTemp)
		{
			config["connections"][pInnerKey] = szValue;
		}
		else if (DetectorVender == strTemp || DetectorModel == strTemp ||
			DetectorDescription == strTemp || DetectorSerialNumber == strTemp)
		{
			config[pInnerKey] = szValue;
		}
		else if (SyncType == strTemp || FPDWorkStation == strTemp ||
			ImageWidth == strTemp || ImageHeight == strTemp)
		{
			config["ModeTable"]["DetectorMode"][pInnerKey] = szValue;
		}
		else if (TempMaxLimit == strTemp || ReConnect == strTemp ||
			TempUpperLimit == strTemp || TempLowerLimit == strTemp ||
			BatLowerLimit == strTemp || BatMiniLimit == strTemp ||
			BatLowerLimitInCali == strTemp || WifiLowerLimit == strTemp ||
			WifiMiniLimit == strTemp || HighPowerTimeout == strTemp ||
			ShowTemperature == strTemp || ShowWifi == strTemp ||
			ShowBattery == strTemp || ShowBluetooth == strTemp ||
			FPDExamMode == strTemp || FPDAcqMode == strTemp || FPDModeMatch == strTemp || 
			CcosDetectorAttachedFlag == strTemp)
		{
			config[pInnerKey] = szValue;
		}
		else
		{
			Error("Error Configuration item: {$}", pInnerKey);
			return false;
		}
	}
	return true;
}


nsFPD::FPDDeviceCareRay::FPDDeviceCareRay(std::shared_ptr<IOEventCenter> center,std::string strConfigPath)
	: m_nCalibTotalExposureNum(0),
	m_nCalibCurrentCalibrationRound(0),
	m_nCalibCurrentExposureIndex(0),
	m_nCalibCurrentExposureNum(0)
{
	m_bDeviceConnect = false;
	m_nFullImageHeight = 0;
	m_nFullImageWidth = 0;
	m_pFullImgBuffer = nullptr;
	m_nImgBits = 0;
	m_nAngle = 0;
	m_nPixelSpacing = 0;
	m_nSensitivity = 0;
	m_fDose = 0;
	m_eSyncMode = SYNC_SOFTWARE;
	m_fFactorEXI2UGY = 0.0f;
	m_nFPDExpReadyTime = 1000;
	m_strWorkPath = GetProcessDirectory();
	m_DetectorCtrlUnit.reset(new OemCtrl(center, this));
	m_AcqUnit.reset(new OemAcq(center, this));
	m_SyncUnit.reset(new OemSync(center, this));
	m_CalibUnit.reset(new OemCalib(center, this));
	m_DetectorConfiguration.reset(new DetectorConfiguration(strConfigPath));

	m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_STANDBY));
	m_CalibUnit->SetCalibrationStatus(to_string(CCOS_CALIBRATION_STATUS_STANDBY));
	m_WaitCalibDoseEvt = CreateEvent(NULL, FALSE, FALSE, NULL);
	m_bOnlyHaveFpd = false;
	EventCenter = center;
	m_eAppStatus = APP_STATUS_IDLE;
}


nsFPD::FPDDeviceCareRay::~FPDDeviceCareRay()
{
	if (nullptr != m_pFullImgBuffer)
	{
		delete[]m_pFullImgBuffer;
		m_pFullImgBuffer = nullptr;
	}
	if (m_WaitCalibDoseEvt)
	{
		CloseHandle(m_WaitCalibDoseEvt);
		m_WaitCalibDoseEvt = nullptr;
	}
}


std::string nsFPD::FPDDeviceCareRay::GetGUID() const
{
	return DetectorUnitType;
}


bool nsFPD::FPDDeviceCareRay::Prepare()
{
	printf("CareRay device module: Prepare \r\n");
	Info("--Func-- device prepare");
	EventCenter->OnMaxBlockSize("DrQue", m_stDeviceConfig.nMaxImageWidth * m_stDeviceConfig.nMaxImageWidth * 2, 3, 1500 * 1500 * 2, 1);
	Connect();
	return true;
}


bool nsFPD::FPDDeviceCareRay::CreateDevice()
{
	Info("CreateDevice start");
	if (!LoadConfig())
	{
		return false;
	}

	if (nullptr == g_pDetector)
	{
		g_pDetector = new Detector_CareRayDR();
	}

	g_pDetector->DriverEntry(this, m_DetectorConfiguration->m_Configurations);
	Info("CreateDevice end");
	return true;
}


void nsFPD::FPDDeviceCareRay::Register()
{
	auto Disp = &Dispatch;

	RegisterCtrl(Disp);
	RegisterAcq(Disp);
	RegisterSync(Disp);
	RegisterCalib(Disp);
}


RET_STATUS nsFPD::FPDDeviceCareRay::Connect()
{
	printf("--Func-- device Connect \r\n");
	Info("--Func-- device Connect");

	m_DetectorCtrlUnit->SetAttachStatus(to_string(1)); //没有attach功能，直接上发1，使客户端显示探测器状态

	RET_STATUS ret = RET_STATUS::RET_FAILED;
	if (g_pDetector->Connect(this, m_strWorkPath.c_str()))
	{
		ret = RET_STATUS::RET_SUCCEED;
	}
	return ret;
}


RET_STATUS nsFPD::FPDDeviceCareRay::EnterExam(int nExamMode)
{
	Info("--Func-- EnterExam {$}", nExamMode);
	switch (nExamMode)
	{
	case APP_STATUS_WORK_BEGIN:
		Info("Enter into Exam Windows");
		m_eAppStatus = APP_STATUS_WORK_BEGIN;
		break;
	case APP_STATUS_WORK_END:
		Info("Quit Exam Windows");
		m_eAppStatus = APP_STATUS_WORK_END;
		break;
	case APP_STATUS_DETSHARE_BEGIN:
		Info("Enter into Detector Share Windows");
		m_eAppStatus = APP_STATUS_DETSHARE_BEGIN;
		break;
	case APP_STATUS_DETSHAR_END:
		Info("Quit Detector Share Windows");
		m_eAppStatus = APP_STATUS_DETSHAR_END;
		break;
	case APP_STATUS_CAL_BEGIN:
		Info("Enter into Calibration Windows");
		m_eAppStatus = APP_STATUS_CAL_BEGIN;
		break;
	case APP_STATUS_CAL_END:
		Info("Quit Calibration Windows");
		m_eAppStatus = APP_STATUS_CAL_END;
		break;
	case APP_STATUS_WORK_IN_SENSITIVITY:
		Info("Enter into sensitivity test interface");
		m_eAppStatus = APP_STATUS_WORK_IN_SENSITIVITY;
		break;
	default:
		break;
	}

	g_pDetector->EnterExamMode(nExamMode);

	return RET_STATUS::RET_SUCCEED;
}


RET_STATUS nsFPD::FPDDeviceCareRay::SetAcqMode(string strMode)
{
	printf("device module: SetAcqMode(%s) \r\n", strMode);
	Info("--Func-- SetAcqMode({$})", strMode);
	RET_STATUS ret = RET_STATUS::RET_FAILED;

	//如果没连接，不执行
	if (!m_bDeviceConnect)
	{
		Error("Detector not connected, return");
		return ret;
	}
	int tempID;
	if (strMode == "DUALENERGY")
	{
		tempID = 3;
	}

	try
	{
		ResDataObject objModeConfig = m_DetectorConfiguration->m_Configurations;
		int nModeCount = (int)objModeConfig["ModeTable"].GetKeyCount("DetectorMode");
		for (int i = 0; i < nModeCount; i++)
		{
			int nAppModeID = (int)objModeConfig["ModeTable"][i]["LogicMode"];
			if (nAppModeID == tempID)
			{
				m_nAcqMode = tempID;
				m_nFullImageWidth = (int)objModeConfig["ModeTable"][i]["ImageWidth"];
				m_nFullImageHeight = (int)objModeConfig["ModeTable"][i]["ImageHeight"];
				m_nImgBits = (int)objModeConfig["ModeTable"][i]["PhySizeInfoBit"];
				m_nAngle = (int)objModeConfig["ModeTable"][i]["RotateAngle"];
				m_nPixelSpacing = (int)objModeConfig["ModeTable"][i]["PixelPitch"];
				m_nSensitivity = (int)objModeConfig["ModeTable"][i]["Sensitivity"];
				m_eSyncMode = (SYNC_MODE)(int)objModeConfig["ModeTable"][i]["SyncType"];
				m_nFPDExpReadyTime = (int)objModeConfig["ModeTable"][i]["XWindow"];
				/*string strDose = (string)objModeConfig["ModeTable"][i]["CalibConfig"]["NodeInfo"]["Dose"];
				m_fDose = stof(strDose.c_str());*/

				if (nullptr != m_pFullImgBuffer)
				{
					delete[]m_pFullImgBuffer;
					m_pFullImgBuffer = nullptr;
				}
				m_pFullImgBuffer = new WORD[(size_t)m_nFullImageWidth * (size_t)m_nFullImageHeight];
				if (m_nAngle == 90 || m_nAngle == 270)
				{
					m_AcqUnit->SetFulImageInfo(m_nFullImageWidth, m_nFullImageHeight, m_nImgBits, false);
				}
				else
				{
					m_AcqUnit->SetFulImageInfo(m_nFullImageHeight, m_nFullImageWidth, m_nImgBits, false);
				}
				m_AcqUnit->SetPrevImageInfo(false, 0, 0, false);

				if (g_pDetector->SetAcqMode(tempID))
				{
					ret = RET_STATUS::RET_SUCCEED;
				}
				break;
			}
		}
	}
	catch (ResDataObjectExption& e)
	{
		Error("Read configuration failed, Error code: {$}", e.what());
	}

	return ret;
}

bool nsFPD::FPDDeviceCareRay::GetOnlyHaveFpd()
{
	return m_bOnlyHaveFpd;
}

int nsFPD::FPDDeviceCareRay::GetGainExposureNum()
{
	return m_nCalibTotalExposureNum;
}

RET_STATUS nsFPD::FPDDeviceCareRay::GetSyncMode(SYNC_MODE& eSyncMode)
{
	eSyncMode = m_eSyncMode;
	return RET_STATUS::RET_SUCCEED;
}


RET_STATUS nsFPD::FPDDeviceCareRay::PrepareAcquisition()
{
	printf("--Func-- PrepareAcquisition \r\n");
	Info("--Func-- PrepareAcquisition");
	RET_STATUS ret = RET_STATUS::RET_FAILED;

	if (!m_bDeviceConnect)
	{
		Error("Detector not connected, return");
		return ret;
	}

	if (DETECTOR_STATUS_STANDBY != m_DetectorCtrlUnit->GetDetectorStatus())
	{
		if ((m_CalibUnit->GetCalibrationStatus() == CCOS_CALIBRATION_STATUS_RUNNING) ||
			(m_CalibUnit->GetCalibrationStatus() == CCOS_CALIBRATION_STATUS_ACTIVE))
		{
			printf("PrepareAcquisition failed. Detector at Calibration status.\n");
			Error("PrepareAcquisition failed. Detector at Calibration status");
		}

		if (DETECTOR_STATUS_ACQ == m_DetectorCtrlUnit->GetDetectorStatus())
		{
			printf("Detector already at Acq status.\n");
			Error("Detector already at Acq status");
			ret = RET_STATUS::RET_SUCCEED; 
		}
	}
	else
	{
		m_SyncUnit->FPDReadyNotify(false); //prepare前置为初值
		if (g_pDetector->PrepareAcquisition(this))
		{
			ret = RET_STATUS::RET_SUCCEED;
			//m_SyncUnit->FPDReadyNotify(true); //prepare succeed
		}
	}
	Info("PrepareAcquisition over");
	return ret;
}


RET_STATUS nsFPD::FPDDeviceCareRay::StartAcquisition(string in)
{
	printf("--Func-- StartAcquisition \r\n");
	Info("--Func-- StartAcquisition");
	RET_STATUS ret = RET_STATUS::RET_FAILED;

	if (!m_bDeviceConnect)
	{
		Error("Detector not connected, return");
		return ret;
	}

	if (m_nAcqMode != AcqMode::DUAL_ENERGY)
	{
		if (DETECTOR_STATUS_STANDBY != m_DetectorCtrlUnit->GetDetectorStatus())
		{
			if ((m_CalibUnit->GetCalibrationStatus() == CCOS_CALIBRATION_STATUS_RUNNING) ||
				(m_CalibUnit->GetCalibrationStatus() == CCOS_CALIBRATION_STATUS_ACTIVE))
			{
				printf("PrepareAcquisition failed. Detector at Calibration status.\n");
				Error("PrepareAcquisition failed. Detector at Calibration status.");
			}

			if (DETECTOR_STATUS_ACQ == m_DetectorCtrlUnit->GetDetectorStatus())
			{
				printf("Detector already at Acq status.\n");
				Error("Detector already at Acq status.");
			}
		}
		else
		{
			if (g_pDetector->StartAcquisition(this))
			{
				ret = RET_STATUS::RET_SUCCEED;
				m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_ACQ));
			}
			else
			{
				m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_STANDBY));
			}
		}
	}
	else
	{
		if (g_pDetector->StartAcquisition(this))
		{
			ret = RET_STATUS::RET_SUCCEED;
		}
		else
		{
			m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_STANDBY));
		}
	}

	Info("StartAcquisition over");
	return ret;
}

RET_STATUS CCOS::Dev::Detail::Detector::FPDDeviceCareRay::ToFrameAcq(string in)
{
	//m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_ACQ));
	return RET_STATUS::RET_SUCCEED;
}

RET_STATUS CCOS::Dev::Detail::Detector::FPDDeviceCareRay::RequestXray(string in)
{
	RET_STATUS ret = RET_STATUS::RET_FAILED;

	if (g_pDetector->RequestXray(this))
	{
		ret = RET_STATUS::RET_SUCCEED;
	}
	return ret;
}


RET_STATUS nsFPD::FPDDeviceCareRay::StopAcquisition()
{
	printf("--Func-- StopAcquisition \r\n");
	Info("--Func-- StopAcquisition");
	RET_STATUS ret = RET_STATUS::RET_FAILED;

	if (!m_bDeviceConnect)
	{
		Error("Detector not connected, return");
		return ret;
	}

	if (DETECTOR_STATUS_STANDBY == m_DetectorCtrlUnit->GetDetectorStatus())
	{
		printf("Detector already at Acq status.\n");
		Info("Detector already at Acq status.");
		ret = RET_STATUS::RET_SUCCEED;
	}
	else
	{
		if (g_pDetector->StopAcquisition(this))
		{
			ret = RET_STATUS::RET_SUCCEED;
			m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_STANDBY));
		}
	}
	Info("StopAcquisition over");
	return ret;
}


RET_STATUS nsFPD::FPDDeviceCareRay::ActiveCalibration(CCOS_CALIBRATION_TYPE eType)
{
	printf("--Func-- ActiveCalibration %d \r\n", eType);
	Info("--Func-- ActiveCalibration {$}", (int)eType);
	RET_STATUS ret = RET_STATUS::RET_FAILED;

	if (!m_bDeviceConnect)
	{
		Error("Detector not connected, return");
		return ret;
	}

	if (eType == CCOS_CALIBRATION_TYPE_NONE || eType == CCOS_CALIBRATION_TYPE_MAX)
	{
		Error("calibration type is invalid!");
		return RET_STATUS::RET_INVALID;
	}

	if (DETECTOR_STATUS_STANDBY != m_DetectorCtrlUnit->GetDetectorStatus())
	{
		if (DETECTOR_STATUS_ACQ == m_DetectorCtrlUnit->GetDetectorStatus())
		{
			printf("ActiveCalibration failed. Detector at Acq status\r\n");
			Error("ActiveCalibration failed. Detector at Acq status");
			ret = StopAcquisition();
			if (ret != RET_STATUS::RET_SUCCEED)
			{
				printf("stop acquisition error\n");
				Error("stop acquisition error");
				return ret;
			}
		}
		return RET_STATUS::RET_FAILED;
	}

	m_eAppStatus = APP_STATUS_CAL_BEGIN;
	if (eType == CCOS_CALIBRATION_TYPE_XRAY)
	{
		printf("calibration type: CCOS_CALIBRATION_TYPE_XRAY\n");
		Info("calibration type: CCOS_CALIBRATION_TYPE_XRAY");
		int nCalibrationRounds = (int)m_CalibDoseList.size();
		g_pDetector->SetCalibRounds(nCalibrationRounds);
	}

	if (g_pDetector->ActiveCalibration(this, eType))
	{
		ret = RET_STATUS::RET_SUCCEED;
		m_CalibUnit->SetCalibrationStatus(to_string(CCOS_CALIBRATION_STATUS_ACTIVE));
		m_CalibUnit->SetCalibrationProgress(0);
		if (eType == CCOS_CALIBRATION_TYPE_XRAY)
		{
			Info("start to waitting CalibDoseEvt");
			printf("start to waitting CalibDoseEvt\n");
			DWORD nRet = WaitForSingleObject(m_WaitCalibDoseEvt, INFINITE);
		}
	}
	else
	{
		Error("Active calibration failed");
		ret = RET_STATUS::RET_FAILED;
	}

	//重置校正流程参数
	m_nCalibCurrentCalibrationRound = 1;
	m_nCalibCurrentExposureIndex = 1;
	m_nCalibCurrentExposureNum = 0;
	Info("ActiveCalibration over");
	return ret;
}


RET_STATUS nsFPD::FPDDeviceCareRay::PrepareCalibration()
{
	printf("--Func-- PrepareCalibration------ \n");
	Info("==============================PrepareCalibration");
	RET_STATUS ret = RET_STATUS::RET_FAILED;

	if (!m_bDeviceConnect)
	{
		printf("Detector not connected, return\n");
		Error("Detector not connected, return");
		return ret;
	}

	m_SyncUnit->FPDReadyNotify(false); //prepare前置为初值
	if (g_pDetector->PrepareCalibration(this))
	{
		printf("FPD ready notify------------\n");
		ret = RET_STATUS::RET_SUCCEED;
		m_SyncUnit->FPDReadyNotify(true); //prepare succeed
	}
	else
	{
		printf("Prepare calibration failed\n");
		Error("Prepare calibration failed");
	}
	m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_STANDBY));
	printf("PrepareCalibration over\n");
	Info("==============================PrepareCalibration over");
	return ret;
}


RET_STATUS nsFPD::FPDDeviceCareRay::GetRequestedDose(std::string& strDose)
{
	Info("==============================GetRequestedDose");
	printf("--Func-- GetRequestedDose------ \n");
	RET_STATUS ret = RET_STATUS::RET_FAILED;
	bool bGetDoseInfo = false;
	ResDataObject out;

	if (!m_bDeviceConnect)
	{
		Error("Detector not connected, return");
		return ret;
	}

	CCOS_CALIBRATION_TYPE nCalibrationType = m_CalibUnit->GetCalibrationType();
	Info("GetRequestedDose calib type is {$}", (int)nCalibrationType);
	printf("GetRequestedDose calib type is %d\n", nCalibrationType);
	if (CCOS_CALIBRATION_TYPE_DARK == nCalibrationType)
	{
		out.add("Dose", 0.0f);
		out.add("kV", 0.0f);
		out.add("mA", 0.0f);
		out.add("ms", 0.0f);
		out.add("mAs", 0.0f);
		bGetDoseInfo = true;
	}
	else if (CCOS_CALIBRATION_TYPE_XRAY == nCalibrationType)
	{
		Info("calib dose list size is {$}", m_CalibDoseList.size());
		printf("calib dose list size is %d\n", (int)m_CalibDoseList.size());
		for (int i = 0; i < m_CalibDoseList.size(); i++)
		{
			ResDataObject temp = m_CalibDoseList[i];
			int nDose = temp["Dose"];
			int nDoseParem = (int)(m_fDoseParam * 1000);
			if (nDoseParem == nDose)
			{
				out.add("Dose", nDoseParem);
				out.add("kV", temp["kV"]);
				out.add("mA", temp["mA"]);
				out.add("ms", temp["ms"]);
				out.add("mAs", temp["mAs"]);
				bGetDoseInfo = true;
				Info("Find target dose parameter");
				break;
			}
		}
	}
	else
	{
		Warn("Can not support CalibrationType($)", (int)nCalibrationType);
		ret = RET_STATUS::RET_FAILED;
	}

	if (bGetDoseInfo)
	{
		strDose = out.encode();
		Info("GetRequestedDose:{$}", strDose.c_str());
		ret = RET_STATUS::RET_SUCCEED;
	}
	else
	{
		Error("GetRequestedDose failed");
	}
	Info("==============================GetRequestedDose over");
	return ret;
}

RET_STATUS nsFPD::FPDDeviceCareRay::GetCalibrationStep(int nDetectorID, string& strCalibrationStepInfo)
{
	Info("==============================GetCalibrationStep");
	printf("--func-- GetCalibrationStep\n");
	Info("Calibration DetectorID: {$}", nDetectorID);

	RET_STATUS ret = RET_STATUS::RET_SUCCEED;
	ResDataObject out;
	int nCalibrationRounds = (int)m_CalibDoseList.size();
	int nExposureNumCurrentRound = (int)m_CalibDoseList[m_nCalibCurrentCalibrationRound - 1]["ExpNum"];

	if (g_pDetector->GetCalibrationStep(m_nCalibCurrentCalibrationRound, nCalibrationRounds, m_nCalibCurrentExposureIndex, nExposureNumCurrentRound))
	{
		Info("GetCalibrationStep success");
	}
	else
	{
		Error("GetCalibrationStep error");
		ret = RET_STATUS::RET_FAILED;
		return ret;
	}

	out.add("CalibrationRounds", (int)m_CalibDoseList.size());
	out.add("TotalExposureNum", m_nCalibTotalExposureNum);
	out.add("CurrentCalibrationRound", m_nCalibCurrentCalibrationRound);
	out.add("ExposureNumCurrentRound", (int)m_CalibDoseList[m_nCalibCurrentCalibrationRound - 1]["ExpNum"]);
	out.add("CurrentExposureIndex", m_nCalibCurrentExposureIndex);
	out.add("CurrentExposureNum", m_nCalibCurrentExposureNum);

	strCalibrationStepInfo = out.encode();

	Info("GetCalibrationStep over,strCalibrationStepInfo: {$}", strCalibrationStepInfo.c_str());
	return ret;
}


RET_STATUS nsFPD::FPDDeviceCareRay::StartCalibration()
{
	printf("--Func-- StartCalibration \r\n");
	Info("--Func-- StartCalibration");
	RET_STATUS ret = RET_STATUS::RET_FAILED;

	if (!m_bDeviceConnect)
	{
		Error("Detector not connected, return");
		return ret;
	}

	if ((m_CalibUnit->GetCalibrationStatus() != CCOS_CALIBRATION_STATUS_PAUSE) && 
		(m_CalibUnit->GetCalibrationStatus() != CCOS_CALIBRATION_STATUS_ACTIVE))
	{
		printf("CCOS_CALIBRATION_STATUS = %d\r\n", (int)m_CalibUnit->GetCalibrationStatus());
		Error("Start calibration failed, in {$} status", (int)m_CalibUnit->GetCalibrationStatus());
		return ret;
	}

	if (DETECTOR_STATUS_STANDBY != m_DetectorCtrlUnit->GetDetectorStatus())
	{
		if (DETECTOR_STATUS_ACQ == m_DetectorCtrlUnit->GetDetectorStatus())
		{
			printf("Start calibration failed. Detector at Acq status.\r\n");
			Error("Start calibration failed. Detector at Acq status");
		}
		return ret;
	}

	if (m_CalibUnit->GetCalibrationStatus() == CCOS_CALIBRATION_STATUS_RUNNING)
	{
		printf("Detector already at calib status.\n");
		Error("Detector already at calib status");
		return ret;
	}

	if (g_pDetector->StartCalibration(this))
	{
		printf("start calibration success set detector status\n");
		Info("start calibration success set detector status");
		m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_ACQ));
		m_CalibUnit->SetCalibrationStatus(to_string(CCOS_CALIBRATION_STATUS_RUNNING));
		ret = RET_STATUS::RET_SUCCEED;
	}
	else
	{
		Error("Start calibration failed");
		ret = RET_STATUS::RET_FAILED;
	}
	Info("StartCalibration over");
	return ret;
}


RET_STATUS nsFPD::FPDDeviceCareRay::StopCalibration()
{
	printf("--Func-- StopCalibration \r\n");
	Info("--Func-- StopCalibration");
	RET_STATUS ret = RET_STATUS::RET_FAILED;

	if (!m_bDeviceConnect)
	{
		Error("Detector not connected, return");
		return ret;
	}

	m_eAppStatus = APP_STATUS_CAL_END;
	if (g_pDetector->StopCalibration(this))
	{
		ret = RET_STATUS::RET_SUCCEED;
		m_CalibUnit->SetCalibrationStatus(to_string(CCOS_CALIBRATION_STATUS_STANDBY));
		m_CalibUnit->SetCalibrationProgress(to_string(100));
	}
	else
	{
		Error("Start calibration failed");
	}
	Info("StopCalibration over");
	return ret;
}


void nsFPD::FPDDeviceCareRay::ConfirmCalExposure()
{
	printf("--Func-- ConfirmCalExposure \r\n");
	Info("--Func-- ConfirmCalExposure");
	g_pDetector->ConfirmCalExposure();
}

void nsFPD::FPDDeviceCareRay::AbortCalibration()
{
	Info("==============================AbortCalibration");
	printf("--func-- AbortCalibration\n");

	CCOS_CALIBRATION_TYPE nCalibrationType = m_CalibUnit->GetCalibrationType();
	if (CCOS_CALIBRATION_TYPE_DARK == nCalibrationType)
	{
		m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_STANDBY));
		m_CalibUnit->SetCalibrationStatus(to_string(CCOS_CALIBRATION_STATUS_ERROR));
		m_CalibUnit->SetCalibrationProgress(to_string(100));

		Info("==============================AbortCalibration over");
		return;
	}

	m_eAppStatus = APP_STATUS_CAL_END;
	g_pDetector->AbortCalibration(this);

	m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_STANDBY));
	m_CalibUnit->SetCalibrationStatus(to_string(CCOS_CALIBRATION_STATUS_ERROR));
	m_CalibUnit->SetCalibrationProgress(to_string(100));
	m_AcqUnit->SendNoNeedWaitImage(true);

	Info("==============================AbortCalibration over");
}

RET_STATUS nsFPD::FPDDeviceCareRay::AcceptCalibration()
{
	Info("==============================AcceptCalibration");
	printf("--func-- AcceptCalibration\n");
	RET_STATUS Ret = RET_STATUS::RET_SUCCEED;
	if (g_pDetector->AcceptCalibration())
	{
		Info("AcceptCalibration over");
		Ret = RET_STATUS::RET_SUCCEED;
	}
	else
	{
		Error("AcceptCalibration error");
		Ret = RET_STATUS::RET_FAILED;
	}
	int nExposureNumCurrentRound = (int)m_CalibDoseList[m_nCalibCurrentCalibrationRound - 1]["ExpNum"];

	//完成校正条件：轮数够了，曝光次数够了
	if ((m_nCalibCurrentCalibrationRound == (int)m_CalibDoseList.size()) && (m_nCalibCurrentExposureIndex == nExposureNumCurrentRound))
	{
		Info("Calibration Round: {$}, Exposure Index: {$}, Finished", m_nCalibCurrentCalibrationRound, m_nCalibCurrentExposureIndex);
		m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_STANDBY));
		m_CalibUnit->SetCalibrationStatus(to_string(CCOS_CALIBRATION_STATUS_STANDBY));
		m_CalibUnit->SetCalibrationProgress(to_string(100));
		return Ret;
	}

	if (m_nCalibCurrentExposureIndex >= nExposureNumCurrentRound) //跳到下一轮校正参数
	{
		m_nCalibCurrentCalibrationRound++;
		m_nCalibCurrentExposureIndex = 1;
		ResDataObject temp = m_CalibDoseList[m_nCalibCurrentCalibrationRound - 1];
		int nDose = temp["Dose"];
		m_fDoseParam = nDose / 1000.0f;
	}
	else
	{
		m_nCalibCurrentExposureIndex++;
	}
	m_nCalibCurrentExposureNum++;

	m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_STANDBY));
	Info("==============================AcceptCalibration over");
	return Ret;
}


void nsFPD::FPDDeviceCareRay::RejectCalExposure()
{
	printf("--Func-- RejectCalExposure \r\n");
	Info("--Func-- RejectCalExposure");
	g_pDetector->RejectCalExposure();
}

RET_STATUS nsFPD::FPDDeviceCareRay::RejectCalibration()
{
	printf("--Func-- RejectCalibration \n");
	Info("==============================RejectCalibration");
	RET_STATUS Ret = RET_STATUS::RET_SUCCEED;

	if (g_pDetector->RejectCalibration())
	{
		Ret = RET_STATUS::RET_SUCCEED;
	}
	else
	{
		Error("RejectCalibration error");
		Ret = RET_STATUS::RET_FAILED;
	}
	m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_STANDBY));
	Info("==============================RejectCalibration over");
	return Ret;
}

bool nsFPD::FPDDeviceCareRay::CompleteCalibration()
{
	printf("--func-- CompleteCalibration \n");
	Info("==============================CompleteCalibration");

	if (!g_pDetector->CompleteCalibration(this))
	{
		Error("CompleteCalibration fail!");
		return false;
	}

	if (g_pDetector->GetCalibType() == CCOS_CALIBRATION_TYPE_DARK)
	{
		printf("CompleteCalibration Calibration Type DARK\n");
		Info("CompleteCalibration Calibration Type DARK");
	}
	else if (g_pDetector->GetCalibType() == CCOS_CALIBRATION_TYPE_XRAY)
	{
		printf("CompleteCalibration Calibration Type XRAY\n");
		Info("CompleteCalibration Calibration Type XRAY");
		m_eAppStatus = APP_STATUS_CAL_END;
	}

	Info("CompleteCalibration set detector status standby");
	m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_STANDBY));
	m_CalibUnit->SetCalibrationStatus(to_string(CCOS_CALIBRATION_STATUS_STANDBY));
	if (m_bOnlyHaveFpd)
	{
		//通知子系统结束暗场校正太快了，导致后边的服务通知app的消息混乱了（不是一个进程的原因）acqservice，故此处延时1s
		printf("Sleep 1s,then send progress 100\n");
		Info("Sleep 1s,then send progress 100");
		Sleep(1000);
	}

	m_CalibUnit->SetCalibrationProgress(to_string(100));
	Info("==============================CompleteCalibration over");
	return true;
}

RET_STATUS nsFPD::FPDDeviceCareRay::SaveCalibrationFile(bool bSaveFlag)
{
	printf("--Func-- SaveCalibrationFile \n");
	Info("==============================SaveCalibrationFile");
	RET_STATUS Ret = RET_STATUS::RET_SUCCEED;
	Info("SaveCalibrationFile bSaveFlag: {$}", bSaveFlag);

	if (!bSaveFlag)
	{
		Warn("Not save calibration file");
		return Ret;
	}

	if (g_pDetector->SaveCalibrationFile())
	{
		Info("SaveCalibrationFile over");
		m_CalibUnit->SetSaveCalibrationFileFinish(true);
		Ret = RET_STATUS::RET_SUCCEED;
	}
	else
	{
		Error("SaveCalibrationFile error");
		m_CalibUnit->SetSaveCalibrationFileFinish(false);
		Ret = RET_STATUS::RET_FAILED;
	}
	Info("==============================SaveCalibrationFile over");
	return Ret;
}

bool nsFPD::FPDDeviceCareRay::Support_DarkCalib()
{
	return true;
}


bool nsFPD::FPDDeviceCareRay::Support_XrayCalib()
{
	return true;
}


void nsFPD::FPDDeviceCareRay::SendTemperatureValue(float fValue)
{
	int nStatus = 0;
	m_Temperature->SetTemperature(fValue, nStatus);
	Info("SendTemperatureValue: {$}, status {$}", fValue, nStatus);
	return;
}


void nsFPD::FPDDeviceCareRay::SendWifiValue(int nValue)
{
	int nStatus = 0;
	m_Wifi->SetSignalValue(nValue, nStatus);
	Info("SendWifiValue: {$}, status {$}", nValue, nStatus);
	return;
}


void nsFPD::FPDDeviceCareRay::SendBatteryValue(int nValue)
{
	int nStatus = 0;
	m_Battery->SetRemainPowerValue(nValue, nStatus);
	Info("SendBatteryValue: {$}, status {$}", nValue, nStatus);
	return;
}


bool nsFPD::FPDDeviceCareRay::LoadConfig()
{
	Info("LoadConfig start");
	if (!m_DetectorConfiguration->LoadConfigurations(m_stDeviceConfig, m_ACQMODElist))
	{
		Error("Load configuration file failed!!!");
		return false;
	}

	string strDoseOfExi = std::to_string(m_stDeviceConfig.nDoseOfEXI);
	m_fFactorEXI2UGY = 100.0f / stof(strDoseOfExi) * 1.0f;//统一使用IEC标准 呈现四角信息，无单位 ugy * 100 -ugy。所有Zskk探测器的FactorEXI2UGY均需*100
	Info("m_fFactorEXI2UGY = {$} ", m_fFactorEXI2UGY);
	string strFPDcoef = std::to_string(m_fFactorEXI2UGY);
	m_DetectorCtrlUnit->SetFPDSensitivity(strFPDcoef);//image process 重算ROIl的EXI需要此值
	//string strFPDinfo = std::to_string(m_nSensitivity);
	//m_DetectorCtrlUnit->SetFPDSensitivity(strFPDinfo);
	m_DetectorCtrlUnit->SetPixelData("");
	m_DetectorCtrlUnit->SetTargetEXI("5000");

	//新增一个配置项代表当前系统中是否只有一个真是的平板探测器，其他设备没有或者是demo的
	size_t keyCount = m_DetectorConfiguration->m_Configurations.GetKeyCount(OnlyHaveFpd);
	Info("LoadConfig OnlyHaveFpd keyCount:{$}", keyCount);
	if (keyCount)
	{
		m_bOnlyHaveFpd = (bool)m_DetectorConfiguration->m_Configurations[OnlyHaveFpd];
		if (m_bOnlyHaveFpd)
			Info("current system only have FPD!");
	}

	m_Battery.reset(new DeviceBatteryMould("DetectorBattery", 0, 
		m_stDeviceConfig.nBatteryLimit, 
		m_stDeviceConfig.nBatteryWarning, 
		100, 100, 0,0,0, EventCenter));

	m_Temperature.reset(new DeviceTemperatureMould("DetectorTemperature", 0.0f, 
		m_stDeviceConfig.fTemperatureMin, 
		m_stDeviceConfig.fTemperLowLimit, 
		m_stDeviceConfig.fTemperatureMax, 
		m_stDeviceConfig.fTemperMaxLimit, 
		0.0f,0,0, EventCenter));

	m_Wifi.reset(new DeviceWifiMould("DetectorWifi", 0, 
		m_stDeviceConfig.nWifiLimit, 
		m_stDeviceConfig.nWifiWarning, 
		100, 100, 0,0,0, EventCenter));

	if (!m_DetectorConfiguration->LoadCalibrationDose(m_strWorkPath, m_CalibDoseList, m_nCalibTotalExposureNum))
	{
		Error("Load Calibration Dose failed!!!");
		return false;
	}
	Info("m_nCalibTotalExposureNum:{$}", m_nCalibTotalExposureNum);

	Info("LoadConfig end");
	return true;
}


void nsFPD::FPDDeviceCareRay::RegisterCtrl(nsDetail::Dispatch* Dispatch)
{
	Dispatch->Action.Push(ActionKey::EnterExam, m_DetectorCtrlUnit.get(), &DetectorCtrlUnit::JSEnterExam);
	Dispatch->Action.Push(ActionKey::ExitExam, m_DetectorCtrlUnit.get(), &DetectorCtrlUnit::JSExitExam);
	Dispatch->Action.Push(ActionKey::SetExposureTimes, m_DetectorCtrlUnit.get(), &DetectorCtrlUnit::JSSetExposureTimes);
	Dispatch->Action.Push(ActionKey::SetXrayOnNum, m_DetectorCtrlUnit.get(), &DetectorCtrlUnit::JSSetXrayOnNum);
	Dispatch->Action.Push(ActionKey::CcosActiveDetector, m_DetectorCtrlUnit.get(), &DetectorCtrlUnit::JSActiveDetector);

	Dispatch->Get.Push(AttrKey::DetectorStatus, m_DetectorCtrlUnit.get(), &DetectorCtrlUnit::JSGetFPDStatus);
	Dispatch->Get.Push(AttrKey::DetectorType, m_DetectorCtrlUnit.get(), &DetectorCtrlUnit::JSGetDetectorType);
	Dispatch->Get.Push(AttrKey::Description, m_DetectorCtrlUnit.get(), &DetectorCtrlUnit::JSGetDescription);
	Dispatch->Get.Push(AttrKey::DetectorID, m_DetectorCtrlUnit.get(), &DetectorCtrlUnit::JSGetDetectorID);
	Dispatch->Get.Push(AttrKey::FPDSensitivity, m_DetectorCtrlUnit.get(), &DetectorCtrlUnit::JSGetFPDSensitivity);
	Dispatch->Get.Push(AttrKey::PixelData, m_DetectorCtrlUnit.get(), &DetectorCtrlUnit::JSGetPixelData);
	Dispatch->Get.Push(AttrKey::TargetEXI, m_DetectorCtrlUnit.get(), &DetectorCtrlUnit::JSGetTargetEXI);
	Dispatch->Get.Push(CcosDetectorAttachedFlag, m_DetectorCtrlUnit.get(), &DetectorCtrlUnit::JSGetAttachStatus);//CcosDetectorAttachedFlag
	Dispatch->Get.Push(SupportDDR, m_DetectorCtrlUnit.get(), &DetectorCtrlUnit::JSGetSupportDDR);
}


void nsFPD::FPDDeviceCareRay::RegisterAcq(nsDetail::Dispatch* Dispatch)
{
	Dispatch->Action.Push(ActionKey::SetAcqMode, m_AcqUnit.get(), &AcqUnit::JSSetAcqMode);

	Dispatch->Get.Push(AttrKey::AcqMode, m_AcqUnit.get(), &AcqUnit::JSGetAcqMode);
	Dispatch->Get.Push(AttrKey::ZskkFPDState, m_AcqUnit.get(), &AcqUnit::JSGetZskkFPDState);
	Dispatch->Get.Push(AttrKey::NoNeedWaitImage, m_AcqUnit.get(), &AcqUnit::JSGetNoNeedWaitImage);
	Dispatch->Get.Push(AttrKey::ImgDataInfo, m_AcqUnit.get(), &AcqUnit::JSGetLastImage);
}


void nsFPD::FPDDeviceCareRay::RegisterSync(nsDetail::Dispatch* Dispatch)
{
	Dispatch->Action.Push(ActionKey::SetSyncMode, m_SyncUnit.get(), &SyncUnit::JSSetSyncMode);
	Dispatch->Action.Push(ActionKey::SetXwindowSize, m_SyncUnit.get(), &SyncUnit::JSSetXwindowSize);
	Dispatch->Action.Push(ActionKey::PrepareAcquisition, m_SyncUnit.get(), &SyncUnit::JSPrepareAcquisition);
	Dispatch->Action.Push(ActionKey::StartAcquisition, m_SyncUnit.get(), &SyncUnit::JSStartAcquisition);
	Dispatch->Action.Push(ActionKey::ToFrameAcq, m_SyncUnit.get(), &SyncUnit::JSToFrameAcq);
	Dispatch->Action.Push(ActionKey::RequestXray, m_SyncUnit.get(), &SyncUnit::JSRequestXray);
	Dispatch->Action.Push(ActionKey::StopAcquisition, m_SyncUnit.get(), &SyncUnit::JSStopAcquisition);

	Dispatch->Get.Push(AttrKey::FPDReadyStatus, m_SyncUnit.get(), &SyncUnit::JSGetFPDReady);
	Dispatch->Get.Push(AttrKey::XwindowStatus, m_SyncUnit.get(), &SyncUnit::JSGetXWindowStatus);
	Dispatch->Get.Push(AttrKey::ImageReadingStatus, m_SyncUnit.get(), &SyncUnit::JSGetImageReadingStatus);
	Dispatch->Get.Push(AttrKey::FPDExpReady, m_SyncUnit.get(), &SyncUnit::JSGetExpReadyStatus);
	Dispatch->Get.Push(AttrKey::SyncMode, m_SyncUnit.get(), &SyncUnit::JSGetSyncMode);
}


void nsFPD::FPDDeviceCareRay::RegisterCalib(nsDetail::Dispatch* Dispatch)
{
	Dispatch->Action.Push(ActionKey::ActiveCalibration, m_CalibUnit.get(), &CalibUnit::JSActiveCalibration);
	Dispatch->Action.Push(ActionKey::GetRequestedDose, m_CalibUnit.get(), &CalibUnit::JSGetRequestedDose);
	Dispatch->Action.Push(ActionKey::SetRequestedDose, m_CalibUnit.get(), &CalibUnit::JSSetRequestedDose);
	Dispatch->Action.Push(ActionKey::PrepareCalibration, m_CalibUnit.get(), &CalibUnit::JSPrepareCalibration);
	Dispatch->Action.Push(ActionKey::StartCalibration, m_CalibUnit.get(), &CalibUnit::JSStartCalibration);
	Dispatch->Action.Push(ActionKey::StopCalibration, m_CalibUnit.get(), &CalibUnit::JSStopCalibration);
	Dispatch->Action.Push(ActionKey::SetCorrectionType, m_CalibUnit.get(), &CalibUnit::JSSetCorrectionType);
	Dispatch->Action.Push(ActionKey::AcceptCalibration, m_CalibUnit.get(), &CalibUnit::JSAcceptCalibration);
	Dispatch->Action.Push(ActionKey::RejectCalibration, m_CalibUnit.get(), &CalibUnit::JSRejectCalibration);
	Dispatch->Action.Push(ActionKey::SaveCalibrationFile, m_CalibUnit.get(), &CalibUnit::JSSaveCalibrationFile);
	Dispatch->Action.Push(ActionKey::GetCalibrationStep, m_CalibUnit.get(), &CalibUnit::JSGetCalibrationStep);

	Dispatch->Get.Push(AttrKey::CalibrationStatus, m_CalibUnit.get(), &CalibUnit::JSGetCalibStatus);
	Dispatch->Get.Push(AttrKey::CalibrationProgress, m_CalibUnit.get(), &CalibUnit::JSGetCalibProgress);
	Dispatch->Get.Push(AttrKey::UploadCalibrationFilesResult, m_CalibUnit.get(), &CalibUnit::JSGetUploadCalibrationFilesResult);
	Dispatch->Get.Push(AttrKey::SupportCalibrationType, m_CalibUnit.get(), &CalibUnit::JSGetSupportCalibrationType);
	Dispatch->Get.Push(AttrKey::HaveImgCalibration, m_CalibUnit.get(), &CalibUnit::JSGetHaveImgCalibration);
	Dispatch->Get.Push(AttrKey::SaveCalibrationFileFinish, m_CalibUnit.get(), &CalibUnit::JSGetSaveCalibrationFileFinish);
}


void nsFPD::FPDDeviceCareRay::RegisterOthers(nsDetail::Dispatch* Dispatch)
{
	Dispatch->Get.Push(AttrKey::Temperature_Value, m_Temperature.get(), &DeviceTemperatureMould::JSGetCurrentTemperatureValue);
	Dispatch->Get.Push(AttrKey::Remain_Power_Value, m_Battery.get(), &DeviceBatteryMould::JSGetCurrentBatteryValue);
	Dispatch->Get.Push(AttrKey::Wifi_Strength_Value, m_Wifi.get(), &DeviceWifiMould::JSGetCurrentSignalValue);
	Dispatch->Get.Push(TempUpperLimit, m_Temperature.get(), &DeviceTemperatureMould::JSGetTemperatureWarningMax);
	Dispatch->Get.Push(TempLowerLimit, m_Temperature.get(), &DeviceTemperatureMould::JSGetTemperatureWarningMin);
	Dispatch->Get.Push(TempMaxLimit, m_Temperature.get(), &DeviceTemperatureMould::JSGetTemperatureErrorMax);
	Dispatch->Get.Push(TempMinLimit, m_Temperature.get(), &DeviceTemperatureMould::JSGetTemperatureErrorMin);
	Dispatch->Get.Push(Temperature_CalibUpWarn, m_Temperature.get(), &DeviceTemperatureMould::JSGetTemperatureCalibWarningMax);
	Dispatch->Get.Push(Temperature_CalibLowWarn, m_Temperature.get(), &DeviceTemperatureMould::JSGetTemperatureCalibWarningMin);
	Dispatch->Get.Push(BatLowerLimit, m_Battery.get(), &DeviceBatteryMould::JSGetBatteryWarningMin);
	Dispatch->Get.Push(BatMiniLimit, m_Battery.get(), &DeviceBatteryMould::JSGetBatteryErrorMin);
	Dispatch->Get.Push(WifiLowerLimit, m_Wifi.get(), &DeviceWifiMould::JSGetSignalWarningMin);
	Dispatch->Get.Push(WifiMiniLimit, m_Wifi.get(), &DeviceWifiMould::JSGetSignalErrorMin);
}


void nsFPD::FPDDeviceCareRay::OnFPDCallback(int nDetectorID, int nEventID, int nEventLevel,
	const char* pszMsg, int nParam1, float fParam2, int nPtrParamLen, void* pParam)
{
	switch (nEventLevel)
	{
	case EVT_LEVEL_CONFIGURATION:
	{
		OnEventProcessConf(nDetectorID, nEventID, nEventLevel, pszMsg, nParam1, fParam2, nPtrParamLen, pParam);
		break;
	}
	case EVT_LEVEL_INFORMATOION:
	{
		OnEventProcessInfo(nDetectorID, nEventID, nEventLevel, pszMsg, nParam1, fParam2, nPtrParamLen, pParam);
		break;
	}
	case EVT_LEVEL_STATUS:
	{
		OnEventProcessStatus(nDetectorID, nEventID, nEventLevel, pszMsg, nParam1, fParam2, nPtrParamLen, pParam);
		break;
	}
	case EVT_LEVEL_DATA:
	{
		OnEventProcessData(nDetectorID, nEventID, nEventLevel, pszMsg, nParam1, fParam2, nPtrParamLen, pParam);
		break;
	}
	case EVT_LEVEL_WARNING:
	{
		OnEventProcessWarning(nDetectorID, nEventID, nEventLevel, pszMsg, nParam1, fParam2, nPtrParamLen, pParam);
		break;
	}
	case EVT_LEVEL_ERROR:
	{
		OnEventProcessError(nDetectorID, nEventID, nEventLevel, pszMsg, nParam1, fParam2, nPtrParamLen, pParam);
		break;
	}
	default:
		break;
	}
}


void nsFPD::FPDDeviceCareRay::OnEventProcessConf(int nDetectorID, int nEventID, int nEventLevel,
	const char* pszMsg, int nParam1, float fParam2, int nPtrParamLen, void* pParam)
{
	Error("Not support this conf({$})", nEventID);
}


void nsFPD::FPDDeviceCareRay::OnEventProcessInfo(int nDetectorID, int nEventID, int nEventLevel,
	const char* pszMsg, int nParam1, float fParam2, int nPtrParamLen, void* pParam)
{
	Error("Not support this info({$})", nEventID);
}


void nsFPD::FPDDeviceCareRay::OnEventProcessStatus(int nDetectorID, int nEventID, int nEventLevel,
	const char* pszMsg, int nParam1, float fParam2, int nPtrParamLen, void* pParam)
{
	switch (nEventID)
	{
	case EVT_STATUS_INIT:
		Info("EVT_STATUS_INIT nParam1:{$}", nParam1);
		break;
	case EVT_STATUS_PANEL:
	{
		ENUM_PANEL_STATUS m_ePanelStatus = (ENUM_PANEL_STATUS)nParam1;
		if (PANEL_CLOSE == nParam1)
		{
			Info("EVT_STATUS_PANEL PANEL_CLOSE");
			m_bDeviceConnect = false;
		}
		else if (PANEL_CONNECT == nParam1)
		{
			Info("EVT_STATUS_PANEL PANEL_CONNECT");
			m_bDeviceConnect = true;
		}
		else if (PANEL_STANDBY == nParam1)
		{
			Info("EVT_STATUS_PANEL PANEL_STANDBY");
			m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_STANDBY));
		}
		else if (PANEL_SLEEP == nParam1)
		{
			Info("EVT_STATUS_PANEL PANEL_NOT_READY");
			m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_WAKEUP));
		}
		else if (PANEL_READY_EXP == nParam1)
		{
			Info("EVT_STATUS_PANEL PANEL_READY_EXP");
			/*string strTemp = pszMsg;
			if (strTemp.find("true") != std::string::npos)
			{
				m_SyncUnit->ExpReadyNotify(m_nFPDExpReadyTime);
			}
			else
			{
				m_SyncUnit->ExpReadyNotify(0);
			}*/
			m_SyncUnit->FPDReadyNotify(true);
			m_AcqUnit->SetZskkFPDState(to_string(ZSKK_FPD_STATE_READY));
		}
		else if (PANEL_XWINDOW_ON == nParam1) //Xwindow On
		{
			m_stImgCreateTime = { 0 };
			GetLocalTime(&m_stImgCreateTime);
			Info("XWindowOn at {$:d04}-{$:d02}-{$:d02} {$:d02}:{$:d02}:{$:d02}:{$:d03}", m_stImgCreateTime.wYear, m_stImgCreateTime.wMonth, m_stImgCreateTime.wDay,
				m_stImgCreateTime.wHour, m_stImgCreateTime.wMinute, m_stImgCreateTime.wSecond, m_stImgCreateTime.wMilliseconds);
			//if (SYNC_SOFTWARE == m_eSyncMode || SYNC_AED == m_eSyncMode)
			//{
			m_SyncUnit->XWindowOnNotify();
			Info("m_SyncUnit XWindowOnNotify Finished!");
			//}
		}
		else if (PANEL_XWINDOW_OFF == nParam1) // Xwindow Off
		{
			m_stImgCreateTime = { 0 };
			GetLocalTime(&m_stImgCreateTime);
			Info("XWindowOff at {$:d04}-{$:d02}-{$:d02} {$:d02}:{$:d02}:{$:d02}:{$:d03}", m_stImgCreateTime.wYear, m_stImgCreateTime.wMonth, m_stImgCreateTime.wDay,
				m_stImgCreateTime.wHour, m_stImgCreateTime.wMinute, m_stImgCreateTime.wSecond, m_stImgCreateTime.wMilliseconds);
			//if (SYNC_SOFTWARE == m_eSyncMode || SYNC_AED == m_eSyncMode) //探测器的关窗是模拟计算的，所以非软同步模式也没必要发送了
			//{
			m_SyncUnit->XWindowOffNotify();
			//}
		}
		else if (PANEL_START_ACQ == nParam1)
		{
			Info("EVT_STATUS_PANEL PANEL_START_ACQ");
			m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_ACQ));
		}
		break;
	}
	case EVT_STATUS_CALIBRATIOIN:
	{
		Info("EVT_STATUS_PANEL EVT_STATUS_CALIBRATIOIN");
		ENUM_PANEL_EVENT_STATE eStatus = (ENUM_PANEL_EVENT_STATE)nParam1;
		switch (eStatus)
		{
		case PANEL_EVENT_START:
			break;
		case PANEL_EVENT_END_OK:
		case PANEL_EVENT_END_ERROR:
			m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_STANDBY));
			m_CalibUnit->SetCalibrationStatus(to_string(CCOS_CALIBRATION_STATUS_STANDBY));
			m_CalibUnit->SetCalibrationProgress(to_string(100));//make progress
			break;
		case PANEL_EVENT_TIMEOUT:
			break;
		default:
			break;
		}
		break;
	}
	case EVT_STATUS_SINGLEEXP:
	{
		Info("EVT_STATUS_PANEL EVT_STATUS_SINGLEEXP");
		if (DOSE_ACCEPT == nParam1)
		{
			Info("Calibration Result is acceptable");
			m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_STANDBY));
			m_CalibUnit->PauseCalibration();
		}
		else
		{
			Error("Not support this param({$})", nParam1);
		}
		break;
	}
	case EVT_STATUS_TEMPERATURE:
	{
		Info("EVT_STATUS_PANEL EVT_STATUS_TEMPERATURE");
		float fTemperature = fParam2;
		//	if (fTemperature > m_fTemperMaxLimit)
		//	{
		//		AddErrMsg("14", "temperature_toohigh");
		//	}
		//	else if (fTemperature >= m_fTemperWarning)
		//	{
		//		AddWarnMsg("14", "temperature_high");
		//	}
		//	else if (fTemperature < m_fTemperMinLimit)
		//	{
		//		AddErrMsg("14", "temperature_toolow");
		//	}
		//	else if (fTemperature <= m_fTemperLowLimit)
		//	{
		//		AddWarnMsg("14", "temperature_low");
		//	}
		//	else
		//	{
		//		DelErrMsg("14");
		//	}
		SendTemperatureValue(fTemperature);
		break;
	}
	case EVT_STATUS_WIFI:
	{
		Info("EVT_STATUS_PANEL EVT_STATUS_WIFI");
		int nWifiLevel = nParam1;
		//	if (nWifiLevel < m_nWifiLimit)
		//	{
		//		AddErrMsg("15", "wifi_toolow");
		//	}
		//	else if (nWifiLevel <= m_nWifiWarning)
		//	{
		//		AddWarnMsg("15", "wifi_low");
		//	}
		//	else
		//	{
		//		DelErrMsg("15");
		//	}
		SendWifiValue(nWifiLevel);
		break;
	}
	case EVT_STATUS_BATTERY_VALUE:
	{
		Info("EVT_STATUS_PANEL EVT_STATUS_BATTERY_VALUE");
		int nBatteryValue = nParam1;
		//	if (nBatteryValue < m_nBatteryLimit)
		//	{
		//		AddErrMsg("16", "battery_toolow");
		//	}
		//	else if (nBatteryValue <= m_nBatteryWarning)
		//	{
		//		AddWarnMsg("16", "battery_low");
		//	}
		//	else
		//	{
		//		DelErrMsg("16");
		//	}
		SendBatteryValue(nBatteryValue);
		break;
	}
	default:
		Error("Not support this event({$})", nEventID);
		break;
	}
}


void nsFPD::FPDDeviceCareRay::OnEventProcessData(int nDetectorID, int nEventID, int nEventLevel,
	const char* pszMsg, int nParam1, float fParam2, int nPtrParamLen, void* pParam)
{
	switch (nEventID)
	{
	case EVT_DATA_RAW_IMAGE:
	{
		Info("EVT_DATA_RAW_IMAGE");
		memcpy(m_pFullImgBuffer, pParam, (size_t)m_nFullImageWidth * (size_t)m_nFullImageHeight * sizeof(WORD));

		//某些值暂时先用假值，有需要再改
		ResDataObject objImageHead, objTemp;
		objTemp.add(SM_IMAGE_TYPE, (int)IMAGE_FULL);
		objTemp.add(SM_IMAGE_BIT, m_nImgBits);
		objTemp.add(SM_IMAGE_TAG, 1);
		objTemp.add(SM_IMAGE_INDEX, 1);
		objTemp.add(SM_IMAGE_YEAR, m_stImgCreateTime.wYear);
		objTemp.add(SM_IMAGE_MONTH, m_stImgCreateTime.wMonth);
		objTemp.add(SM_IMAGE_DAY, m_stImgCreateTime.wDay);
		objTemp.add(SM_IMAGE_HOUR, m_stImgCreateTime.wHour);
		objTemp.add(SM_IMAGE_MINUTE, m_stImgCreateTime.wMinute);
		objTemp.add(SM_IMAGE_SEC, m_stImgCreateTime.wSecond);
		objTemp.add(SM_IMAGE_MILLSEC, m_stImgCreateTime.wMilliseconds);
		objTemp.add(SM_IMAGE_LSB, "5000");
		objTemp.add(SM_IMAGE_DOSE, m_nSensitivity);
		objTemp.add(SM_IMAGE_PIXELSPACING, m_nPixelSpacing);
		objTemp.add(SM_IMAGE_PIXELREPRESENTATION, "1");
		objTemp.add(SM_IMAGE_FLIP, "No");
		objTemp.add(SM_IMAGE_ORIGINX, "0");
		objTemp.add(SM_IMAGE_ORIGINY, "0");
		objTemp.add(SM_IMAGE_EXI2UGY, m_fFactorEXI2UGY);

		if (0 != m_nAngle)
		{
			m_AcqUnit->RotateImage(m_pFullImgBuffer, m_nFullImageHeight, m_nFullImageWidth, m_nAngle);
		}
		if (90 == m_nAngle || 270 == m_nAngle)
		{
			objTemp.add(SM_IMAGE_WIDTH, m_nFullImageHeight);
			objTemp.add(SM_IMAGE_HEIGHT, m_nFullImageWidth);
			objTemp.add(SM_IMAGE_ROTATION, "Yes");
		}
		else
		{
			objTemp.add(SM_IMAGE_WIDTH, m_nFullImageWidth);
			objTemp.add(SM_IMAGE_HEIGHT, m_nFullImageHeight);
			objTemp.add(SM_IMAGE_ROTATION, "No");
		}
		objImageHead.add(SM_IMAGE_HEAD, objTemp);
		Info("Full image head: {$}", objImageHead.encode());

		//如果环境中只有探测器，那么这里增加一个推送状态
		if (m_bOnlyHaveFpd)
		{
			Info("OnProcessImage OnlyHaveFpd Sleep 1s then set fpd standby(4)");
			Sleep(1000);
			m_DetectorCtrlUnit->SetDetectorStatus(to_string(DETECTOR_STATUS_STANDBY));
		}

		m_AcqUnit->AddFrameWithRawHead(IMAGE_FULL, objImageHead.encode(), m_pFullImgBuffer, m_nFullImageWidth * m_nFullImageHeight);
		Info("Add image over");
		printf("Add image over\n");
		break;
	}
	case EVT_DATA_DOSEPARAM:
	{
		m_fDoseParam = fParam2;
		SetEvent(m_WaitCalibDoseEvt);
		break;
	}
	default:
		Error("Not support this data({$})", nEventID);
		break;
	}
}


void nsFPD::FPDDeviceCareRay::OnEventProcessError(int nDetectorID, int nEventID, int nEventLevel,
	const char* pszMsg, int nParam1, float fParam2, int nPtrParamLen, void* pParam)
{
	switch (nEventID)
	{
		case EVT_ERR_COMMUNICATE:
		//{
		//	string strTemp = pszMsg;
		//	if (strTemp.find("true") != std::string::npos)
		//	{
		//		AddErrMsg("0", "communication error");
		//		SendTemperatureValue(0);
		//		SendWifiValue(0);
		//		SendBatteryValue(0);
		//	}
		//	else if (strTemp.find("false") != std::string::npos)
		//	{
		//		DelErrMsg("0");
		//	}
		//}
		break;
		case EVT_ERR_INIT_FAILED:
		//{
		//	string strTemp = pszMsg;
		//	if (strTemp.find("true") != std::string::npos)
		//	{
		//		AddErrMsg("6", "initialize error");
		//	}
		//	else if (strTemp.find("false") != std::string::npos)
		//	{
		//		//一般不可恢复
		//	}
		//}
		break;
	default:
		Error("Not support this error({$})", nEventID);
		break;
	}
}


void nsFPD::FPDDeviceCareRay::OnEventProcessWarning(int nDetectorID, int nEventID, int nEventLevel,
	const char* pszMsg, int nParam1, float fParam2, int nPtrParamLen, void* pParam)
{
	Error("Not support this warn({$})", nEventID);
}